journal article·2025-07Open access

Structural safety assessment and strengthening methods for masonry towers

Paolo Foraboschi

Abstract

This paper focuses on masonry towers, a broad term encompassing various types of tall masonry structures. Their structural analysis remains an underexplored area in the literature, and consequently, is inadequately addressed by codes, standards, and guidelines. Similarly, the topic of strengthening masonry towers has received limited attention. Unlike masonry buildings, where load-carrying capacity is primarily governed by equilibrium – making external loads and their points of application the dominant factors, while masonry compressive strength and maximum acting stresses play a secondary role – the capacity of masonry towers is typically determined by compressive strength. This makes the properties of the masonry material, along with the maximum acting stresses, critical, while kinematic mechanisms play a lesser role. Existing literature and standards, however, predominantly address masonry buildings, neglecting masonry structures where material properties govern load-carrying capacity. This paper aims to bridge these gaps by drawing on the author’s research and professional experience, including the presentation of several case studies. The findings and advancements presented are intended to contribute not only to academic research but also to professional practice. • A framework for a structural type not adequately covered by literature and codes. • Masonry towers: reality vs. appearance. • Masonry towers’ structural behavior differs from other masonry structures. • Assessing the structural safety of masonry towers poses serious challenges. • Strengthening masonry towers poses serious challenges.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Health Monitoring Techniques · Structural Engineering and Vibration Analysis · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. Assessment of structural condition of a historic masonry minaret in Egypt
2. Evaluation study on structural fault of a Renaissance Italian palace10.1016/j.engstruct.2010.03.001 ↗
3. Seismic vulnerability evaluation of a historical masonry tower: comparison between different approaches10.3390/app122111254 ↗
4. Influence of the ground on the structural identification of a bell-tower by ambient vibration testing10.1016/j.soildyn.2021.107102 ↗
5. Assessment of seismic behavior of historic masonry minarets in Antalya, Turkey
6. Damage identification and seismic vulnerability assessment of a historic masonry chimney
7. Effect of lateral resisting systems on the wind-induced serviceability response of tall timber buildings
8. Determining the structural performance of the concrete and masonry shafts in a historic waterway
9. A case study comparing seismic retrofitting techniques for a historically significant masonry building’s minaret10.1016/j.engfailanal.2024.108873 ↗
10. Assessment, repair, and retrofitting of masonry structures: a comprehensive review10.1016/j.conbuildmat.2024.137380 ↗
11. Unveiling the hidden deterioration of the Alcazaba of Almería (Spain): a comprehensive study on Arabic architectural materials
12. Collapse analysis of masonry arches and domes considering finite friction and uncertainties in compressive strength
13. Preliminary assessment of structural masonry damage in Malbork Castle
14. Retrofitting of unreinforced masonry structures and considerations for heritage-sensitive constructions
15. Characteristics of CFRP strengthened masonry wallettes under concentric and eccentric compression
16. Experimental and numerical investigations of an auxetic support structure used for local repair of buried pipelines
17. Seismic vulnerability assessment of a masonry structure and an FRP-strengthening proposal
18. Seismic assessment of historical masonry towers by means of simplified approaches and standard FEM10.1016/j.conbuildmat.2016.01.025 ↗
19. Dynamic compaction of a thick soil-stone fill: dynamic response and strengthening mechanisms10.1016/j.soildyn.2019.105944 ↗
20. Experimental study and design approach on 3D printed concrete walls under eccentric axial compression
21. Numerical investigation of jacking method for asymmetric settlement rectification in tilted concrete buildings
22. Role of model identification and analysis method in the seismic assessment of historical masonry towers
23. Model updating of a masonry tower based on operational modal analysis: the role of soil-structure interaction
24. Seismic pounding between adjacent buildings: identification of parameters, soil interaction issues and mitigation measures10.1016/j.soildyn.2019.02.024 ↗
25. Identification of seismic failure modes of URM infilled RC frame buildings10.1016/j.engfailanal.2013.04.017 ↗
26. Seismic evaluation and retrofitting of the structures of the Sadaghiani masonry historical complex
27. Numerical simulation of interaction properties at wall-to-tie-column interface for confined masonry walls10.1016/j.conbuildmat.2023.134139 ↗
28. Experimental study of CRM-reinforced brick masonry panels: cyclic shear-compression tests and compression tests10.1016/j.engstruct.2023.117262 ↗
29. Unraveling the structural deterioration of Isfahan’s Sio-Se-Pol historical bridge: a finite element analysis approach
30. Enhanced shear performance of nacre-inspired masonry structure: experiment and theoretical model
31. Analytical stress–strain model of reinforced concrete masonry wallettes under axial compression10.1016/j.istruc.2021.09.052 ↗
32. Experimental and numerical dynamic identification of a historic masonry bell tower accounting for different types of interaction10.1016/j.soildyn.2018.03.012 ↗
33. British Standards Institution 1978. Code of practice for use of masonry. BS 5628, Part 1: unreinforced masonry.
34. D.M. 20.11.1987 “Norme tecniche per la progettazione, esecuzione e collaudo degli edifici in muratura e per il loro consolidamento.” Italian Ministerial Decree of November 20, 1987 “Code on design, execution, and formal testing of masonry buildings and their strengthening”.
35. National Building Code; 1989.
36. OPCM 3274, 20.03.2003 “Primi elementi in materia di criteri generali per la classificazione sismica del territorio nazionale e di normative tecniche per le costruzioni in zona sismica”. Italian Instructions of March 20, 2003 “Criteria for seismic classification and technical guide for construction in seismic zones”.
37. Seismic damage and retrofitting identification in unreinforced masonry Churches and bell towers by the September 19, 2017 (Mw = 7.1) Puebla-Morelos earthquake10.1016/j.engfailanal.2020.104924 ↗
38. Calibration of resistance factors for seismic design of masonry infilled frames using the random finite element method10.1016/j.engstruct.2024.118590 ↗
39. Dynamic model identification of the medieval bell tower of Casertavecchia (Italy)
40. Seismic performance of a new type precast concrete sandwich wall based on experimental and numerical investigation10.1016/j.soildyn.2019.04.013 ↗
41. Opening and mixed-mode fracture initiation in a quasi-brittle material10.1061/(ASCE)EM.1943-7889.0000488 ↗
42. Simple method for studying slow crack growth10.1520/JTE10015J ↗
43. A method for evaluating the time-dependent failure characteristics of brittle materials and its application to polycrystalline alumina10.1007/BF00550196 ↗
44. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
45. A single-surface multi-failure strength domain for masonry10.1016/j.ijsolstr.2023.112624 ↗
46. A probabilistic fatigue strength model for brick masonry under compression10.1016/j.conbuildmat.2009.02.043 ↗
47. A review on building progressive collapse, survey and discussion
48. Building materials and decay assessment of the Gerace Cathedral (Reggio Calabria, Southern Italy)
49. Investigating the standard design and production procedure of heritage mortars for compatible and durable masonry restoration
50. Research on the distribution and evolution of weathering failure of stacked wall and sandwich wall under freeze–thaw cycles10.1016/j.engfailanal.2022.106109 ↗
51. Finite-difference solution for dissipation of excess pore water pressure within liquefied soil stabilized by stone columns with consideration of coupled radial-vertical seepage10.1016/j.soildyn.2023.108328 ↗
52. Material behaviour of unstabilised earth block masonry and its components under compression at varying relative humidity
53. Case study of prototype and small-scale model behavior of clay blocks masonry under compression
54. Influence of moisture content on the mechanical properties of an ancient high-porosity building sandstone: San Cristóbal's stone (Andalusia, Spain)
55. Progressive collapse assessment of precast prestressed reinforced concrete beams using applied element method
56. Effect of salt crystallization ageing on the compressive behavior of sandstone blocks in historical buildings10.1016/j.engfailanal.2012.08.001 ↗
57. Quantitative evaluation of tunnel lining voids by acoustic spectrum analysis10.1016/j.conbuildmat.2019.116762 ↗
58. Numerical and experimental pseudo-static study on block arrangement effects in traditional dry-stone walls for out-of-plane mechanical behavior evaluation10.1016/j.engfailanal.2024.108900 ↗
59. Masonry does not limit itself to only one structural material: interlocked masonry versus cohesive masonry
60. Resisting system and failure modes of masonry domes10.1016/j.engfailanal.2014.05.005 ↗
61. Thermophysical indicators of elaborated sandwich cladding constructions with heat-reflective coverings and air gaps
62. A low-cost timber cladding system for the sustainable retrofit of masonry buildings: mechanical characterization under diagonal compression
64. Dynamic damage identification for a full-scale parabolic tuff barrel vault under differential settlements of the supports10.1016/j.conbuildmat.2021.123271 ↗
65. System identification for structural condition assessment: application to critical neoclassical monuments in Nepal
66. Brick masonry identification in a complex historic building, the Main College of the University of Alcalá, Madrid (Spain)10.1016/j.conbuildmat.2013.12.027 ↗
67. Damage identification on arched masonry structures using ambient and random impact vibrations10.1016/j.engstruct.2009.09.002 ↗
68. Dynamic identification of brick masonry semi-circular arches due to temperature and moisture10.1016/j.istruc.2023.02.022 ↗
69. Modal parameters identification with environmental tests and advanced numerical analyses for masonry bell towers: a meaningful case study10.1016/j.prostr.2018.11.040 ↗
70. Combined finite–discrete element method for parameter identification of masonry structures10.1016/j.conbuildmat.2023.132297 ↗
71. Multi-objective optimization-based model calibration of masonry bridges
72. Ancient architectural pathology of blue bricks and brick carvings in Northwest China: Example from the White Temple Tower
73. Test of three-storey confined masonry structure built from clay blocks and PU glue
74. Mechanical properties of masonry stone samples extracted from Mexican Colonial churches
75. Compressive strength prediction of crumb rubber mortar based on mesoscale model10.1016/j.engfailanal.2023.107485 ↗
76. Masonry panels with external thermal insulation subjected to in-plane diagonal compression
77. Evaluation of compressive strength of masonry walls by limit analysis10.1061/(ASCE)0733-9445(1988)114:10(2179) ↗
78. Study on the shear properties of masonry pagoda mortar and its influencing factors
79. Statistical assessment of tensile and shear properties of unreinforced clay brick masonry10.1016/j.conbuildmat.2023.131578 ↗
80. Scanning through multidisciplinary techniques and recreation of historic mortar: case study of Rohtas Fort
81. Design method for masonry structures retrofitted with steel reinforced plaster
82. Multi-strut macro-model for masonry infilled frames with openings
83. Assessment of the tensile behavior of twisted steel connectors for masonry retrofitting10.1016/j.conbuildmat.2023.131771 ↗
84. Cyclic behavior of masonry walls retrofitted with post-installed twisted bars or bonded rebars10.1016/j.conbuildmat.2023.134026 ↗