journal article·2024-07Open access

Numerical and experimental investigation on synthetic macrofiber-reinforced concrete manhole exposed to railway loads

Péter Károly Juhász, Péter Schaul, Boglárka Veres

Abstract

The refurbishment of railway lines and the installation of new tracks necessitate the construction of numerous concrete manholes; therefore, the optimization of manholes should be investigated. To this end, the use of innovative materials in addition to advanced design methods with realistic modeling is required. In the case of conservatively designed structures, there exists the possibility of redesigning the structure utilizing suitable fiber-reinforced concrete (FRC) only. The main advantage of synthetic macrofibers over steel is their complete corrosion resistance, which is essential in corrosive environments. Other advantages include their low carbon footprint, reduced construction time, and cost-effectiveness. This paper outlines the optimization process for a conventional cast-in-situ concrete manhole. The imperative for a monolithic construction system stems from the diverse geometries and distinct designs of individual pipe culverts, compounded by the often-challenging accessibility of installation sites. In the optimization phase, synthetic macrofiber reinforcement replaced conventional reinforcing steel bars, using advanced finite element analysis (FEA). The design was not conducted on an equivalent basis, resulting in potential variations in the load-carrying capacity between reinforced concrete (RC) and FRC manholes. Nevertheless, both are deemed suitable for the specified loads. The conventional design method used for RC and the advanced finite element design method used for FRC were scrutinized, taking into account the existing standard environment. Subsequently, a real-scale test was conducted to validate the calculations. Carbon footprint analyses were performed for both the original and proposed solutions, and the results were compared. The solution obtained in this study is unique and pioneering in terms of both the calculation method and the structural design, and the CO2 calculations validate its necessity.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Industrial solid wastes utilization and disposal
2. Chinese-Hungarian Railway Non-profit Private Limited Company, https://www.mavcsoport.hu/bbproject/, 2017 (accessed 25 October 2023).
3. Budapest–Belgrade railway project, https://www.gov.cn/ldhd/2013-11/26/content_2534550.htm (accessed 25 October 2023).
4. Circular precast concrete manholes: experimental investigation10.1139/L10-135 ↗
5. Circular precast concrete manholes: numerical modeling10.1139/l11-059 ↗
6. Evaluation of Sensitive Parameters in the Design of Deeper Manhole
7. Improving the geometry of manholes designed for separate sewer systems10.1139/cjce-2018-0057 ↗
8. H.I. Al-Saleem, W. Langdon, Precast Concrete Manholes - a Review and Upgrade of Current Practice, in New Zeland's Stormwater Conference 2016, https://www.waternz.org.nz/Article?Action=View&Article_id=1138, Nelson, New Zealand, 18-20th May 2016.
9. Pipe & Manhole Materials for a 100+ Year Design Life
10. Brandt · 2009
11. Materials and properties of fibre reinforced concrete
12. Shrinkage cracking in polyolefin fiber reinforced concrete
13. Alberti · 2015
14. Performance Characteristics of 3M Polyolefin Fibre Reinforced Concrete
15. EN 14889-2:2007. Fibres for concrete. Part 2: Polymer fibres. Definitions, specifications and conformity. European Committee for Standardization, Brussels.
16. Experimental observations of self-consolidated hybrid fiber reinforced concrete on corrosion damage reduction10.1016/j.conbuildmat.2015.12.076 ↗
17. Nordström · 2000
18. The effect of synthetic fibre reinforcement on the fracture energy of the concrete
19. Effects on pouring technique on orientation of steel and synthetic macrofibers in fibre-reinforced concrete10.32970/CS.2020.1.1 ↗
20. Österreichusche Vereinigung für Beton- und Bautechnik, Richtlinie Faserbeton, ÖVBB, Vienna, 2008.
21. Embrittlement of fiber-reinforced shotcrete
22. Dodge Data & Analytics, World Green Building Trends 2021, https://www.corporate.carrier.com/Images/Corporate-World-Green-Building-Trends-2021-1121_tcm558-149468.pdf (accessed 21 November 2023).
23. Global Alliance for Buildings and Construction, International Energy Agency and the United Nations Environment Programme (2019): 2019 global status report for buildings and construction: Towards a zero-emission, efficient and resilient buildings and construction sector.
24. World Green Building Council, Bringing embodied carbon upfront, 2019, https://worldgbc.s3.eu-west-2.amazonaws.com/wp-content/uploads/2022/09/22123951/WorldGBC_Bringing_Embodied_Carbon_Upfront.pdf (accessed 21 November 2023).
25. United Nations Environment Programme, A. Inger, 2020, UNEP in 2019 - Letter from the Executive Director [Annual Report] https://wedocs.unep.org/handle/20.500.11822/32374 (accessed 21 November 2023).
26. United Nations Climate Change, Annual Report 2021, https://unfccc.int/sites/default/files/resource/UNFCCC_Annual_Report_2021.pdf (accessed 21 November 2023).
27. Eurocode, https://eurocodes.jrc.ec.europa.eu/, (accessed 25 October 2023).
28. EN 1990 · Eur.: Basis Struct. Des. Eur. Comm. Stand., Bruss. · 2011
29. Eurocode 1: Actions on structures. Part 1-1: General actions. Densities, self-weight, imposed loads for buildings
30. Eurocode 2: Design of concrete structures. Part 1-1: General rules and rules for building
31. Concrete. Specification, performance, production and conformity
32. Concrete. Specification, performance, production, conformity, and rules of application of EN 206 in Hungary
33. Earth pressure in soils
34. e-VASUT 02.10.20 (2014) Vasúti alépítmény tervezése, építése, karbantartása és felújítása, https://portal.maut.hu/.
35. e-VASUT 02.70.02 (2018) Vasúti hidak és egyéb műtárgyak méretezésének általános előírásai, https://portal.maut.hu/.
36. e-VASUT 02.70.04 · Vasúti vasbeton, feszített vasbeton éS. Beton Tervezése · 2018
37. RILEM TC 162-TDF: Test and Design Methods for Steel Fibre Reinforced Concrete – σ-ε 449 Design Method – Final Recommendation
38. Design Considerations for Steel Fiber Reinforced Concrete
39. National Research Council · 2006
40. fib · Model Code 2010 - Final Draft · 2012 · vol. 1
41. Structural effects of FRC creep
42. Szintetikus szálerősítésű betonok hozzáadott törési energiája az adalékanyag függvényében (The added fracture energy of the synthetic fibre reinforced concrete as a function of the aggregate, in Hungarian)10.1556/096.2015.43.3-4.9 ↗
43. EN 14651:2005+A1:2008. Test method for metallic fibered concrete. Measuring the flexural tensile strength (limit of proportionality (LOP), residual). European Committee for Standardization, Brussels.
44. BarChip Inc. https://barchip.com/wp-content/uploads/2017/11/EPC_PDS_BarChip48_2017_email.pdf.
45. V. Červenka, L. Jendele, J. Červenka, Advanced Tool for Engineering Nonlinear Analysis (ATENA) 5.9.1c, Prague, 2023, https://www.cervenka.cz/products/atena/.
46. An international competition to predict the response of reinforced concrete panels10.1139/l85-070 ↗
47. The Challenge of Predicting the Shear Strength of Very Thick Slabs
48. Precast, pre-stressed grandstand of PFRC in stadium, Hungary
49. Full-round Numerical Modelling of a Macro Synthetic Fibre Reinforced TBM Tunnel in the Shanghai Metro Extension
50. Numerical modelling of a precast fibre reinforced concrete track slab
51. Crack Band Theory for Fracture of Concrete
52. Červenka · ATENA Program Doc. · 2021 · Part 1
53. Three dimensional combined fracture–plastic material model for concrete10.1016/j.ijplas.2008.01.004 ↗
54. Hordijk · 1991
55. Material model for finite element modelling of fatigue crack growth in concrete”10.1016/j.proeng.2010.03.022 ↗
56. EN 1917 · 2002
57. ASTM C497-20e1. Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile. https://doi.org/10.1520/C0497-20E01.10.1520/C0497-20E01 ↗
58. On-Site Measurements of CO2 Emissions during the Construction Phase of a Building Complex10.3390/en9080599 ↗
59. Estimation of carbon dioxide emission in highway construction: a case study in southwest region of China10.1016/j.jclepro.2014.10.030 ↗
60. Industry
61. Assessment of carbon footprint in the construction phase of high-rise constructions in Tehran10.1007/s13762-019-02557-3 ↗
62. Greenhouse Gas Protocol, Technical Guidance for Calculating Scope 3 Emissions (version 1.0) https://ghgprotocol.org/sites/default/files/2023-03/Scope3_Calculation_Guidance_0%5B1%5D.pdf (accessed 21 November 2023).
63. Recycled aggregates in concrete production: engineering properties and environmental impact10.1051/matecconf/201710105021 ↗
64. IEA, Global CO2 emissions in 2019, https://www.iea.org/articles/global-co2-emissions-in-2019, (accessed 21 November 2023).
65. Carbon footprint assessment of polypropylene fiber reinforced concrete floors10.18848/2154-8587/CGP/v03i01/37372 ↗