Research on axial compression performance of concrete columns with angle steel embedded in BMSCC stay-in-place formwork
Source abstract
Abstract
A new type of stay-in-place formwork column (SFC) was proposed. The square prefabricated shell was made of basic magnesium sulfate cement based composite (BMSCC) and reinforced by angle steel frame. The SFC can be formed after ordinary concrete is poured. The optimum mix ratio of BMSCC was obtained by physical and mechanical tests. The axial compression tests were conducted on 5 SFCs and 3 reinforced concrete (RC) contrast columns, to investigate the effects of the amount of angle steel and the batten plate spacing on the axial compression performance of the SFCs. The results show that the axial compression capacity, cracking load and ductility of the SFC are improved compared with the RC column under the same conditions. The bearing capacity increased by about 13% and the cracking load increased by more than 54%. The axial compression capacity increases with the increase of the section area of the angle steel and the decrease of the spacing between the batten plates. According to the theoretical analysis and test results, by introducing the reduction coefficient of angle steel strength and the reduction coefficient of cement strength, the calculation expression of axial compression capacity of short column with BMSCC stay-in-place (SIP) formwork reinforced by angle steel was established.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. 3D concrete printing of permanent formwork for concrete column construction
2. Concrete formwork reuse in a supply chain with dynamic changes using ABMS and discrete events
3. Design and performance of polystyrene modular composite dismantling-free formwork10.4028/p-5hz2d9 ↗
4. Sayed M.S., Bahaa T.M., Hassan A.A. Assesment of a new constrcution technique for reinforced concrete structures[J]. 2022, 2(2):35–50.
5. Behavior of ultrahigh-performance concrete bridge decks with new Y-shape FRP stay-in-place formworks10.1061/(ASCE)CC.1943-5614.0001214 ↗
6. A review of the research and application progress of new types of concrete-filled FRP tubular members10.1016/j.conbuildmat.2021.125353 ↗
7. Potential use of strain hardening ECC in permanent formwork with small scale flexural beams
8. Cost-effective, structural stay-in-place formwork system of fiber-reinforced polymer for accelerated and durable bridge deck construction10.1177/0361198106197600120 ↗
9. Mesh-mould: robotically fabricated spatial meshes as reinforced concrete formwork
10. Precast permanent formwork in the 21st century
11. Importance of sustainable concrete formwork system10.4028/www.scientific.net/AMR.598.360 ↗
12. Interfacial bonding properties of 3D printed permanent formwork with the post-casted concrete10.1016/j.cemconcomp.2022.104457 ↗
13. Experimental study on flexural behavior of ECC/RC composite beams with U-shaped ECC permanent formwork10.1007/s11709-019-0556-0 ↗
14. Novel FRP micro-bar reinforced UHPC permanent formwork for circular columns: concept and compressive behavior10.1016/j.compstruct.2022.115268 ↗
15. Seismic performance of PVA textile cementitious composites used as permanent formwork in full-scale circular RC columns10.1016/j.istruc.2021.12.006 ↗
16. Concrete-filled steel tube columns encased with thin precast concrete
17. Zhang J., Zeng L., Wang Z. experimental research on FRP as permanent mould of concrete engineering, 2000, (05): 32–34. https://doi.org/10.3969/j.issn.1003–0999.2000.05.011.
18. Wang Xinying. Research on static performance of precast U-shaped RPC permanent beam formwork and its composite beam [D]. Jilin University, 2021.
19. Research on the design method for the steel fiber RPC column-permanent template
20. Design conception of ultra-high-performance fiber reinforced concrete hybrid pier with durability consideration
21. Experimental study on axial compressive behavior of composite circular concrete short columns with fabric reinforced concrete permanent formwork
22. Experimental study on the axial compressive behaviour of steel reinforced concrete composite columns with stay-in-place ECC jacket
23. Experimental and numerical studies on the comparison between stay-in-place- and conventionally-formed reinforced concrete columns under concentric loading
24. Research on the mechanical properties of assembled TRC permanent formwork composite columns
25. Axial behavior of reinforced concrete column with ultra-high performance concrete stay-in-place formwork10.1016/j.engstruct.2020.110403 ↗
26. Novel FRP micro-bar reinforced UHPC permanent formwork for circular columns: concept and compressive behavior
27. Cyclic test of concrete bridge column utilizing ultra-high performance concrete shell10.1177/0361198120906088 ↗
28. Research on the bonding performance of TRC permanent formwork and cast-in-place concrete10.1016/j.engstruct.2021.112021 ↗
29. An investigation on bond between FRP stay-in-place formwork and concrete10.1016/j.conbuildmat.2016.03.124 ↗
30. Prospects for the development of stay in plase formwork for low-rise buildings in cramped conditions
31. Influence of boron on the properties of basic magnesium sulfate cement10.1016/j.conbuildmat.2022.126951 ↗
32. Research on technology of performance improvement of basic magnesium sulfate cement-BMS10.1002/suco.202000165 ↗
33. Mechanistic study of the effects of magnesia reactivity on setting and hardening of basic magnesium sulfate cement10.3151/jact.18.678 ↗
34. Study on mechanical behavior of concrete stub columns confined by angle steel under axial compression