Innovative fiber-reinforced self-compacting concrete using activated slag from sugar factory lime waste
Source abstract
Abstract
This study presents a pioneering investigation into the development of self-compacting concrete utilizing slag activated with sugar factory lime waste reinforced with various types of fibers. Comprehensive testing was conducted to evaluate fresh concrete properties, including slump flow, specific gravity, t50, V-Funnel, and Orimet tests, as well as hardened concrete characteristics such as compressive strength, tensile strength, four-point bending, and water absorption. Scanning Electron Microscopy (SEM) analysis was performed to assess the microstructure, and a Life Cycle Assessment (LCA) was carried out using the IMPACT 2002+ method to evaluate environmental impacts. The results indicated that samples reinforced with 0.5% and 1% Barchip fibers, following samples without fibers (with a slump of 695 mm), achieved slump values of 690 mm and 688 mm, respectively, along with optimal discharge times, thereby demonstrating favorable fresh concrete characteristics. Meanwhile, the samples reinforced with steel fibers exhibited the best mechanical properties, with compressive, bending, and tensile strengths of 53.6 MPa, 7.1 MPa, and 6.6 MPa, respectively, representing increases of 8%, 65%, and 69% compared to fiber-free samples. The four-point bending tests revealed that steel fibers provided the largest softening zone, whereas barchip fibers produced the largest hardening zone. SEM analysis confirmed that steel fibers contributed to a denser microstructure and stronger bonding within the cement matrix. Furthermore, LCA results demonstrated that polypropylene and barchip fibers had the lowest carbon footprints, at 222.4 and 227.9 kg CO 2 eq, respectively, highlighting their potential for sustainable construction applications. This research contributes valuable insights into formulating eco-friendly self-compacting concrete with enhanced mechanical properties, promoting sustainable practices in the construction industry.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Novel cement-free UHPC with high gamma-ray resistance using calcium oxide–activated slag, iron and barite powders, and steel fibers10.1061/JMCEE7.MTENG-18446 ↗
2. Microstructural characterization of alkali-activated concrete using waste-derived activators from industrial and agricultural sources: a review
3. A novel eco-friendly thermal-insulating high-performance geopolymer concrete containing calcium oxide activated materials with waste tire and polyethylene terephthalate
4. Sustainable high-performance concrete with sugar factory lime waste –activated slag and fiber reinforcement: mechanical properties and environmental impact10.1016/j.conbuildmat.2025.140202 ↗
5. Sustainable construction solutions: the role of sugar factory lime waste-activated slag in high-performance concrete10.1016/j.asej.2025.103315 ↗
6. Comparative analysis of environmental, social, and mechanical aspects of high-performance concrete with calcium oxide-activated slag reinforced with basalt, and recycled PET fibers
7. A high-strength concrete resistant to elevated temperatures using steel slag aggregates10.1002/suco.202200806 ↗
8. Comparison of rheology and durability of geopolymer and Portland cement concrete at the same strength levels10.1016/j.conbuildmat.2025.139958 ↗
9. A novel development of HPC without cement: mechanical properties and sustainability evaluation10.1016/j.jobe.2023.107262 ↗
10. A comparative study of calcium hydroxide, calcium oxide, calcined dolomite, and metasilicate as activators for slag-based HPC10.1016/j.istruc.2023.105653 ↗
11. Enhancing the mechanical properties of ultra-high-performance concrete (UHPC) through silica sand replacement with steel slag10.3390/buildings14113520 ↗
12. A novel high-performance concrete based on calcium oxide-activated materials reinforced with different fibers
13. Strength development and microstructure properties of slag activated with alkaline earth metal ions: a review study
14. A review of engineering properties of ultra-high performance geopolymer concrete
15. Experimental study of the flexural behaviour of RC beams made of eco-friendly sawdust concrete and strengthened by a wooden plate10.1186/s40069-023-00617-0 ↗
16. Experimental study on using recycled polyethylene terephthalate and steel fibers for improving behavior of RC columns
17. Experimental and numerical analysis of the punching behavior of RC isolated footings
18. Improving the punching capacity of two-way RC flat slabs via external strengthening using various configurations of aluminum sheets10.1016/j.conbuildmat.2024.135611 ↗
19. Structural performance of seasand recycled aggregate concrete filled solid/hollow aluminum tubular columns: an experimental work10.1016/j.istruc.2022.12.002 ↗
20. Properties of self-compacting high-strength concrete containing multiple use of recycled aggregate10.1016/j.jksues.2018.12.002 ↗
21. Self-compacting high-performance concrete
22. Flexural behavior of self-compacting concrete reinforced with different types of steel fibers10.1016/j.conbuildmat.2013.05.072 ↗
23. The effect of micro silica fume (MSF) content on pore fractal dimension (PFD) and mechanical properties of self-consolidating concrete
24. Physical and mechanical properties of self-compacting concrete containing superplasticizer and metakaolin
25. Assessment of factors influencing mechanical properties of steel fiber reinforced self-compacting concrete10.1016/j.matdes.2015.06.024 ↗
26. Influence of fibre type on flexural behaviour of self-compacting fibre reinforced cementitious composites10.1016/j.cemconcomp.2014.03.007 ↗
27. Mechanical performance of self-compacting concrete reinforced with steel fibers10.1016/j.conbuildmat.2013.10.054 ↗
28. Mechanical properties of steel fiber reinforced self-compacting concrete: a review
29. Workability of hybrid fiber reinforced self-compacting concrete10.1016/j.buildenv.2004.12.014 ↗
30. Fresh and strength properties of concrete reinforced with metalized plastic waste fibers10.1016/j.conbuildmat.2017.04.095 ↗
31. Mechanical properties of lime-treated clay reinforced with different types of randomly distributed fibers10.1007/s12517-018-3458-x ↗
32. The possibility of enhancing some properties of self-compacting concrete by adding waste plastic fibers10.1016/j.jobe.2016.06.011 ↗
33. Behaviour and damage assessment of a new hybrid-fibre-reinforced mortar under impact load10.1680/jmacr.16.00536 ↗
34. Synergistic effect between CaCO3 whisker and steel-PVA fiber cocktail in cement-based material at elevated temperature10.1061/(ASCE)MT.1943-5533.0004103 ↗
35. High volume of slag and polypropylene fibres in engineered cementitious composites: microstructure and mechanical properties10.1680/jmacr.22.00128 ↗
36. Quality and mechanical properties of engineered steel fibres used as reinforcement for concrete10.1016/j.conbuildmat.2012.02.058 ↗
37. Testing and performance of fiber-reinforced, self-consolidating concrete10.1007/BF02479648 ↗
38. Influence of pulverized fly ash on the properties of self-compacting fiber reinforced concrete
39. Stability of superplasticizer and shrinkage-reducing admixtures stability of superplasticizer and shrinkage-reducing admixtures in high basic media10.3989/mc.2004.v54.i276.256 ↗
40. Effect of curing stress on compression behavior of cement-treated dredged sediment10.1061/(ASCE)GM.1943-5622.0001857 ↗
41. Self-compacting geopolymer mixture: dosing based on statistical mixture design and simultaneous optimization10.1016/j.conbuildmat.2020.118677 ↗
42. EFNARC · 2005
43. An experimental investigation on self-compacting alkali activated slag concrete mixes10.1016/j.jobe.2018.01.009 ↗
44. Mechanical properties of ultra-high-performance fiber-reinforced concrete containing synthetic and mineral fibers
45. Effects of synthetic fibers and different levels of partial cement replacement on mechanical properties of UHPFRC10.1061/(ASCE)MT.1943-5533.0003462 ↗
46. Fiber type and curing environment effects on the mechanical performance of UHPFRC containing zeolite10.1007/s40996-022-00911-z ↗
47. Microstructure of ultra-high performance concrete (UHPC)–a review study