journal article·2024-07Open access

Corrosion protection failure test analysis of the initial damaged cable ICCP mechanism

Xuanbo He, Guowen Yao, Hong Long, Li Ying, Zengwei Guo, Ling Zhao, Yang Tang, Peiyan Huang

Abstract

Given the corrosion protection failure of the cable-stayed bridge cable in the actual project, the impressed current cathodic protection (ICCP) technology was used to carry out the anti-corrosion tests from steel wire scale to cable scale, analyze the corrosion protection characteristics of steel wire ICCP, deduce the corrosion factor ICCP diffusion model, and reveal the space ICCP mechanism of the initial damaged cable. The analysis shows that ICCP can effectively inhibit the corrosive effect of steel wires and cables, and reduce the loss of mechanical properties of steel wires. Its protective efficiency increases with an increase in the absolute value of its protective potential and decreases with an increase in the dead load level. ICCP has a blocking effect on the diffusion of corrosion factors in the cable space, and the corrosion spatial distribution range, corrosion factor concentration, and diffusion coefficient of the initial damaged cable decrease significantly with the increase in the absolute value of the protection potential. The open circuit potential moves in a positive direction with the development of the corrosion process, and the blocking effect of corrosive factor diffusion is transformed from the joint participation by sacrificial anode cathodic protection and ICCP to the dominance of ICCP.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Editorial Department of China Journal of Highway and Transport, Review on China's bridge engineering research: 2021. China Journal of Highway Transport. 34(02) (2021) 1-97.
2. Cathodic protection of a bridge deck: preliminary investigation
3. W. Green, F. Andrews-Phaedonos, G. Brewster, D. Mccormick, Lynch's bridge-a case study in the cathodic protection of reinforced concrete. (2001) (Conference on Corrosion & Prevention Corrpro Companies Australia, Sydney).
4. Impressed current cathodic protection techniques for concrete structures and their applications to civil engineering
5. Impressed current cathodic protection system for reinforced concrete bridge decks
6. Overall design of Hangzhou bay sea-crossing bridge
7. J.C. Ball, D.W. Whitmore, P. Eng, Galvanic protection foe reinforced concrete bridge structures: case studies and performance assessment. (2012) (Annual Conference of the Australasian Corrosion Association, Harbour).
8. Design and research on in-situ ICCP monitoring system for steel pipe piles of shanghai Yangtze River bridge
9. Application of impressed current cathodic protection technology on cable pylon foundation of sea-crossing bridge
10. X. Yu, Y.Q. Wang, W.X. Li, C. Li, The impressed current cathodic protection technology is applied in the Sino-Korean Yalu River boundary river. (2013) (Annual Meeting of Bridge and Structural Engineering Branch of China Study Association & National Bridge Academic Conference, Shenyang).
11. Residual protection on a wharf structure following application of impressed current cathodic protection10.1051/matecconf/201928903005 ↗
12. The world's first hybrid corrosion protection systems for prestressed concrete bridges
13. Cathodic protection on the UK's midland links motorway viaducts
14. Service life extension of state highway 16 bridges-New Zealand’s first hybrid corrosion protection application.10.1051/matecconf/201819905002 ↗
15. Long-term performance of hybrid anodes for cathodic protection of reinforced concrete10.1051/matecconf/201819905003 ↗
16. Testing old cathodic protection on Ohio bridge decks
17. Tidal water effect on the hybrid cathodic protection systems for marine concrete structures10.3151/jact.10.389 ↗
18. Effects of the impressed current on the performance of sacrificial anodes
19. Hybrid cathodic protection systems save a New Zealand bridge
20. Case studies of hybrid and galvanic systems on bridge structures10.1051/matecconf/201928903013 ↗
21. Performance analysis and residual life assesment of existing sacrificial anodes for east China sea bridge steel piles
22. Study on design of additional anti-corrosion measures for concrete structure of Hong Kong-Zhuhai-Macao bridge
23. L.K. Xu, Study on mixed metal oxide anodes for cathodic protection. (2005) (MS Thesis, Tianjin University, CHN).
24. J.Q. Feng, Research on key technologies of impressed current cathodic protection system for FPSO. (2020) (MS Thesis, Dalian University of Technology, CHN).
25. X.X. Wang, Research on long-life reference electrode for general FPSO. (2021) (MS Thesis, Dalian University of Technology, CHN).
26. Application of impressed current cathodic protection in reinforced seawater tank
27. The influence of graphene on the cathodic protection performance of zinc-rich epoxy coatings
28. Test study of the bridge cable corrosion protection mechanism based on impressed current cathodic protection10.3390/lubricants11010030 ↗
29. Experimental study on cathodic protection mechanism of bridge cable steel wire with applied current
30. P.Y. Chen, Research on impressed current cathodic protection method of bridge cable structure. (2020) (MS Thesis, Chongqing Jiaotong University, CHN).
31. Z.R. He, Study on hydrogen permeation behavior of X80 pipeline steel caused by cathodic protection and stress. (2014) (MS Thesis, China University of Petroleum (East China), CHN).
32. Impressed current cathodic protection of rebar in concrete using Carbon FRP laminate10.1016/j.conbuildmat.2017.08.145 ↗
33. Corrosion behavior of zinc exposed to salt lake area for 48 months
34. Evaluation of corrosion protection performance of electroplated zinc and zinc-graphene oxide nanocomposite coatings in air saturated 3.5 wt% NaCl solution
35. Electrochemical research of the failure process about three epoxy zinc rich primers in 3.5% NaCl solution.
36. Electrochemical investigation of corrosion behavior of epoxy modified silicate zinc-rich coatings in 3.5% NaCl solution10.3390/coatings10050444 ↗
37. Microstructure induced galvanic corrosion evolution of SAC305 solder alloys in simulated marine atmosphere10.1016/j.jmst.2020.03.024 ↗
38. Effect of cathodic protection current density on corrosion rate of high-strength steel wires for stay cable in simulated dynamic marine atmospheric rainwater10.1016/j.istruc.2020.12.028 ↗
39. Semiconductor property and corrosion behavior of passive film formed on steel with zinc coating in 5% NaCl solution10.1007/s13369-017-2640-x ↗
40. J. Chen, Experimental study on corrosion damage of HDPE system of stayed cables under environment and loading. (2020) (MS Thesis, Chongqing Jiaotong University, CHN).
41. Study on the mechanical properties of stay cable HDPE sheathing fatigue in dynamic bridge environments10.3390/polym7081470 ↗
42. Inspection of technical condition of bridge stay cables in operation period
43. Analysis of stay cable corrosion protection for cable-stayed bridge and suggestions
44. J. Xu, Damage evolution mechanism and remained service lives evaluation of stayed cables. (2006) (PhD Thesis, Tongji University, CHN).
45. Performance of bonded anchorage for CFRP tendons affected by temperature or moisture
46. L.F. Yang, Prediction of the remaining life of damaged cables and Research on method of safety assessment. (2015) (MS Thesis, Chongqing Jiaotong University, CHN).
47. Modelling of water and chloride transport in concrete during yearly wetting/drying cycles10.1016/j.conbuildmat.2015.02.012 ↗
48. Transport model of chloride ions in concrete under loads and drying-wetting cycles10.1016/j.conbuildmat.2016.02.167 ↗
49. Chloride transport in cracked concrete under wet-dry cycling condition
50. The Influence of cathodic polarization on performance of two epoxy coatings on steel10.1016/S1452-3981(23)10887-X ↗
51. A mechanistic study of the enhanced cathodic protection performance of graphene-reinforced zinc rich nanocomposite coating for corrosion protection of carbon steel substrate10.1016/j.jallcom.2017.08.250 ↗