journal article·2026-07Open access

Enhancing the toughness and low-temperature performance of epoxy asphalt via PTMG-MDI modified epoxy resin

Yitong Hou, Qiqi Zhan, Xinqiang Zhang, Bailin Shan, Liming Yang, Pan Liu, Yanan Cui

Abstract

Epoxy asphalt is widely applied in steel bridge deck paving due to its high strength and thermal stability. However, the thermosetting epoxy resin becomes highly brittle after curing, resulting in insufficient toughness and poor low-temperature crack resistance. To address this issue, a novel high-toughness epoxy asphalt (HTEA) was developed by grafting polytetramethylene ether glycol-diphenylmethane diisocyanate (PTMG-MDI), serving as polyurethane flexible segments, onto epoxy resin and incorporating it into asphalt. The cured high-toughness epoxy resin (HTER) exhibited good thermal stability and mechanical properties, with a tensile strength of 4.05 MPa and an elongation at break of 143 %. HTEA showed slightly reduced tensile strength but significantly increased elongation at break. Rheological tests indicated that the retention time of HTEA reached up to 37 min. The storage modulus decreased in the low-temperature region, while the high-temperature creep compliance changes only slightly, indicating improved creep recovery performance. The fracture morphologies of HTER and HTEA exhibits ductile characteristics. The PTMG-MDI increases the density of cross-linking points in the three-dimensional network, thereby improving the low-temperature crack resistance of epoxy asphalt. When the HTER content is 40 % the glass transition temperature of HTEA is as low as −28.7℃, and the testing temperature is −24℃, the maximum creep modulus reaches 492 MPa, with a minimum creep rate of 0.242, indicating excellent low-temperature performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Polymer Nanocomposites and Properties · Petroleum Processing and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Effect of laboratory long-term oven aging on the stiffness of asphalt mixtures10.1016/j.conbuildmat.2020.120252 ↗
2. Evaluation of prina for use in asphalt modification
3. Experimental and molecular dynamics simulations investigating the flexibility and compatibility of epoxidized soybean oil-reinforced epoxy asphalt10.1061/JMCEE7.MTENG-17722 ↗
4. Evaluation of the effects of asphalt binder aging degree on the curing, compatibility, and mechanical behaviors of epoxy asphalt binders10.1016/j.conbuildmat.2023.131131 ↗
5. Advances in the application and research of steel bridge deck pavement10.1016/j.istruc.2022.09.084 ↗
6. Study on synthesis of novel phosphorus-containing flame retardant epoxy curing agents from renewable resources and the comprehensive properties of their combined cured products10.1016/j.porgcoat.2017.01.012 ↗
7. Performance evaluation and structure optimization of low-emission mixed epoxy asphalt pavement10.3390/ma15186472 ↗
8. Study on preparation and properties of new thermosetting epoxy asphalt10.1016/j.conbuildmat.2021.125307 ↗
9. Performance characteristics of epoxy asphalt paving material for thin orthotropic steel plate decks10.1080/10298436.2018.1481961 ↗
10. Cracking resistance evaluation of epoxy asphalt mixtures with 100% reclaimed asphalt pavement (RAP)10.1016/j.conbuildmat.2023.132320 ↗
11. Performance evolution mechanism of hot-mix epoxy asphalt binder and mixture based on component characteristics10.1061/(ASCE)MT.1943-5533.0004379 ↗
12. Rheological characteristics of epoxy asphalt binders and engineering properties of epoxy asphalt mixtures - state-of-the-art10.1080/14680629.2021.1963814 ↗
13. Dynamic behavior of precast epoxy asphalt track bed for transition zone in high-speed railway: a numerical approach
14. Investigation on the properties of epoxy asphalt mixture containing crumb rubber for bridge expansion joint10.1016/j.conbuildmat.2022.127344 ↗
15. Construction technology of warm and hot mix epoxy asphalt paving for long-span steel bridge10.1061/(ASCE)CO.1943-7862.0001716 ↗
16. Investigation of the properties of epoxy resin-modified asphalt mixtures for application to orthotropic bridge decks10.1002/app.33948 ↗
17. Modification of alkyl group terminated hyperbranched polyester on paving epoxy asphalt10.1016/j.conbuildmat.2017.12.182 ↗
18. Development and characterization of anti-cracking epoxy asphalt for steel deck pavement10.1016/j.conbuildmat.2024.137047 ↗
19. Material design and mechanism explanation of epoxy asphalt toughened with SBS/CR and CSR10.1061/JMCEE7.MTENG-17958 ↗
20. Toughening epoxy asphalt binder using core-shell rubber nanoparticles10.1016/j.conbuildmat.2020.119716 ↗
21. Preparation and properties of epoxy asphalt modified by biomimetic graphene oxide nanocomposites10.1061/(ASCE)MT.1943-5533.0004569 ↗
22. Preparation and performance of graphene nanoplatelets-modified epoxy asphalt10.1061/(ASCE)CF.1943-5509.0001661 ↗
23. Component-activating redesign of cold patch asphalt mixture towards humidity adaptability: performance evaluation, structure characterization, and mechanism analysis10.1016/j.conbuildmat.2025.144856 ↗
24. Sustainable synthesis of polyurethane using epoxidized soybean oil for enhanced performance of modified asphalt
25. Modified cellulose nanocrystals enhancement to mechanical properties and water resistance of vegetable oil-based waterborne polyurethane10.1002/app.48228 ↗
26. Preparation of self-healing and degradable high-performance epoxy thermosets containing disulfide bonds and hindered urea bonds10.1016/j.polymdegradstab.2025.111410 ↗
27. Synthesis and characterization of polyHIPEs using a polymerizable polyurethane macromolecular surfactant10.1007/s00396-024-05278-3 ↗
28. Synthesis of a novel curing agent containing dynamic disulfide bonds and the preparation of repairable epoxy vitrimer modified asphalt10.1016/j.conbuildmat.2025.140053 ↗
29. Deeper insights into the thermal properties of epoxy thermoset resins using torsion measurements10.1002/app.51221 ↗
30. Using DSR and MSCR tests to characterize high temperature performance of different rubber modified asphalt10.1016/j.conbuildmat.2016.10.010 ↗
31. Influence of Nano size hydrated lime filler on rutting performance of asphalt mastic10.1080/14680629.2019.1660208 ↗
32. Study of the properties of waterborne epoxy resin emulsified asphalt and its modification mechanism10.1061/JMCEE7.MTENG-14627 ↗
33. Asphalt-rubber interaction and performance evaluation of rubberised asphalt binders containing non-foaming warm-mix additives10.1080/14680629.2018.1561380 ↗
34. Silica loaded binary epoxy resins cured by an imide-amine hardener suitable for preparing transparent and flexible coatings10.1134/S1560090423700768 ↗
35. Simultaneous reinforcement and toughness improvement of an epoxy-phenolic network with a hyperbranched polysiloxane modifier10.1039/C8RA01740A ↗
36. Thermo-mechanical and creep behaviour of polylactic acid/thermoplastic polyurethane blends10.3390/polym14235276 ↗
37. Using the viscoelastic parameters to estimate the glass transition temperature of asphalt binders10.1016/j.conbuildmat.2017.07.120 ↗
38. Relationship between glass transition temperature and low temperature properties of oil modified binders10.1016/j.conbuildmat.2015.12.048 ↗
39. Research progress on polyurethane-modified epoxy resins for road applications10.1007/s00289-024-05334-6 ↗
40. Characteristics of steel slag filler and its influence on rheological properties of asphalt mortar10.1016/j.conbuildmat.2018.12.174 ↗
41. Research on modification mechanism and performance of an innovative bio-based polyurethane modified asphalt: A sustainable way to reducing dependence on petroleum asphalt10.1016/j.conbuildmat.2022.128830 ↗