journal article·2026-07Open access

Prediction of ultrasonic pulse velocity and physicochemical properties of rice husk ash concrete exposed to elevated temperatures and post-fire curing

Ali Nazari, Vahab Toufigh

Abstract

The novelty of this study is its evaluation of the physicochemical properties and non-destructive testing performance of concrete containing rice husk ash (RA) subjected to post-heating curing. The study examines temperatures of 300°C, 500°C, and 700°C. Post-heating curing was performed in water and in air for 28 and 56 days. Ultrasonic pulse velocity (UPV), X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric (TG)/differential thermogravimetric (DTG) analysis were determined to evaluate thermal damage and recovery mechanisms. Predictive relationships between UPV and the outcomes of destructive tests were established, allowing the condition of the concrete to be estimated without relying solely on destructive methods. The high R-squared values, ranging from 0.83 to 0.98, confirm that UPV is a reliable indicator of thermal damage and recovery. Physicochemical analyses highlighted the rehydration and pozzolanic activity of RA, with 8% RA recovering 36.7% compressive strength after 56 days of water re-curing. A statistical optimization using the Taguchi method and ANOVA was additionally performed to identify the most effective parameters influencing strength recovery. Post hoc Tukey HSB was used to compare RA levels and temperatures. Optimization results highlighted that 8% RA content provided the most significant improvement in recovery behavior, particularly under water re-curing conditions. Finally, a life cycle assessment (LCA) was conducted to evaluate the environmental impacts of the studied concrete mixtures. This assessment showed that incorporating RA significantly lowered environmental impacts, reducing global warming potential by 21.3% and resource depletion by 24.8%. • Physicochemical and non-destructive evaluation of rice husk ash concrete after fire and re-curing • Predictive modeling of strength based on ultrasonic pulse velocity • Environmental impact analysis of rice husk ash concrete using life cycle assessment • Re-curing enhanced recovery in rice husk ash concrete through continued pozzolanic activity. • Rice husk ash increased resistance to thermal degradation in concrete.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fire effects on concrete materials · Concrete and Cement Materials Research · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Synergistic effects of alkali content and silicate modulus optimization for enhanced properties in alkali-activated ultra-high performance concrete at ambient and high temperature
2. Determination of the mechanical properties and gamma-neutron shielding effectiveness of ultra-high performance dense concrete (UHPdC) exposed to high temperatures
3. Investigation the properties of sustainable ultra-high-performance basalt fibre self-compacting concrete incorporating nano agricultural waste under normal and elevated temperatures
4. Permeability of roller-compacted concrete after various loading levels10.1061/JMCEE7.MTENG-20228 ↗
5. Fire-induced damage assessment of cementless alkali-activated slag-based concrete10.1016/j.conbuildmat.2023.132002 ↗
6. Prediction of ultrasonic pulse velocity in steel fiber-reinforced concrete containing nylon granule and natural zeolite after exposure to elevated temperatures10.1016/j.conbuildmat.2020.121958 ↗
7. BS EN 12504-4:2004. "Testing concrete – Part 4: Determination of ultrasonic pulse velocity, (n.d.).
8. The influence of water absorption and porosity on the deterioration of cement paste and concrete exposed to elevated temperatures, as in a fire event10.1016/j.cemconcomp.2012.06.007 ↗
9. Influence of water re-curing on microstructure of heat-damaged cement mortar characterized by low-field NMR and MIP10.1016/j.conbuildmat.2020.120532 ↗
10. Health monitoring of polymer concrete subjected to various temperatures utilizing sinusoidal ultrasonic signals and an agglomeration of artificial intelligence techniques10.1016/j.ymssp.2025.112828 ↗
11. A study of thermal decomposition of phases in cementitious systems using HT-XRD and TG10.1016/j.conbuildmat.2018.03.001 ↗
12. Effects of elevated temperatures and re-curing on concrete containing rice husk ash10.1016/j.conbuildmat.2024.137277 ↗
13. Mechanical properties and damage constitutive model of concrete containing waste glass and rice husk ash in high-temperature environments
14. Post-fire impact behavior and durability of steel fiber-reinforced concrete containing blended cement–zeolite and recycled nylon granules as partial aggregate replacement10.1007/s43452-022-00393-w ↗
15. Effects of silica fume and rice husk ash contents on engineering properties and high-temperature resistance of slag-based prepacked geopolymers
16. Impact of rice husk ash on physico-mechanical, durability and microstructural features of rubberized lightweight geopolymer composite10.1016/j.conbuildmat.2024.136265 ↗
17. Influence of waste glass and rice husk ash on the dynamic compressive properties and variable-angle shear characteristics of concrete after high-temperature treatment: experimental and numerical study10.1016/j.istruc.2024.107419 ↗
18. Evaluation of geopolymer concrete at high temperatures: an experimental study using machine learning10.1016/j.jclepro.2022.133608 ↗
19. Experimental investigation of energy absorption in fiber-reinforced ultra high-performance concrete after exposure to elevated temperatures
20. Eurocode 4, EN 1994-1-2:2004. Design of composite steel and concrete structures–Part 1-2: General rules for structural fire design., (n.d.).
21. ISO, Fire resistance tests-elements of building construction., Int. Stand. ISO 834, Geneva (1975).
22. ACI (American Concrete Institute), Guide for Determining the Fire Endurance of Concrete Elements., ACI 216R-89. Farmingt. Hills. MI (1989).
23. Investigating the fracture behavior and ductility of self-compacting concrete containing recycled nylon granules: An experimental and modeling study10.1016/j.tafmec.2025.105254 ↗
24. Physical, mechanical, thermal and sustainable properties of UHPC with converter steel slag aggregates
25. Effect of waste steel fiber use on concrete behavior at high temperature
26. Impact of rice husk ash on geopolymer concrete: a literature review and future directions
27. Results in Engineering Advanced predictive modeling for masonry walls: a comparative study of six AI models and existing empirical formulas10.1016/j.rineng.2025.107634 ↗
28. Effect of fly ash content on the performance of hardened cement-based materials suffered from high temperatures
29. Rice husk ash as a partial replacement of cement in high strength concrete containing micro silica: Evaluating durability and mechanical properties
30. Effect of Rice Husk Ash on the Mechanical Properties and Microstructure of Concrete Subjected to High Temperatures10.1061/(ASCE)MT.1943-5533.0004664 ↗
31. ACI 546R-14. Concrete Repair Guide., Am. Concr. Inst. (n.d.).
32. Case studies in construction materials a comprehensive study on post-fire curing of recycled aggregate concrete
33. Influences of elevated temperature and re-curing on the compressive performance of lightweight concrete containing metakaolin: experiments and prediction models10.1016/j.conbuildmat.2025.142111 ↗
34. Mechanism and effect of Re-curing on strength recovery of fire-damaged high strength engineered cementitious composite10.1016/j.conbuildmat.2025.139920 ↗
35. A review on the recovery of fire-damaged concrete with post-fire-curin10.1016/j.conbuildmat.2019.117564 ↗
36. Effects of re-curing on residual mechanical properties of concrete after high temperature exposure10.1016/j.conbuildmat.2017.11.005 ↗
37. Effects of re-curing on microstructure of concrete after high temperature exposure10.1016/j.conbuildmat.2018.02.122 ↗
38. Regain of strength after firing of concrete10.1680/macr.1970.22.72.149 ↗
39. Strength and durability recovery of fire-damaged concrete after post-fire-curing10.1016/S0008-8846(01)00582-8 ↗
40. Effects of elevated temperature and water re-curing on the compression behavior of hybrid fiber reinforced concrete
41. Physicochemical and mechanical changes of thermally damaged cement pastes and concrete for re-curing conditions Hong10.1016/j.cemconres.2019.105831 ↗
42. The effect of post-fire-curing on strength-velocity relationship for nondestructive assessment of fire-damaged concrete strength10.1016/j.firesaf.2011.01.006 ↗
43. Environmental assessment of masonry mortars made with natural and recycled aggregates10.1007/s11367-018-1518-9 ↗
44. The role of service life in Life Cycle Assessment of concrete structures10.1016/j.jclepro.2020.125610 ↗
45. Life cycle assessment
46. Global carbon recoverability experiences from the cement industry
47. Investigation on the compositional and performance evolution of cement paste subjected to Xenon radiation
48. ASTM C150/C150M · 2012
49. Recycling of rice husk waste for a sustainable concrete: A critical review10.1016/j.jclepro.2021.127734 ↗
50. ASTM C33/C33M · 2013
51. ACI Committee 211.1-91 · 2000 · 38
52. ASTM C143/C143M · 2015
53. ASTM C192/C192M · 2018
54. Designation: ASTM C597–02, Standard Test Method for Pulse Velocity through Concrete., (n.d.).
55. American Society for Testing and Materials, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, (2016).
56. ASTM C496/C496M · 2017
57. Optimization of mechanical properties of geopolymer mortar based on Class C fly ash and silica fume: a Taguchi method approach
58. Experimental and analytical evaluation of rubberized polymer concrete10.1016/j.conbuildmat.2017.08.097 ↗
59. Synergistic effects of GGBFS and EAFS on rheology, mechanical properties, and durability of self-compacting concrete: experiments, predictions, and life cycle assessment10.1016/j.conbuildmat.2024.136948 ↗
60. Rice husk ash incorporation in calcium aluminate cement concrete: life cycle assessment, hydration and strength development
61. Using rice husk ash to imitate the properties of silica fume in high-performance fiber-reinforced concrete ( HPFRC): A comprehensive durability and life-cycle evaluation
62. A comparative study of mechanical properties and life cycle assessment of high-strength concrete containing silica fume and nanosilica as a partial cement replacement10.1016/j.istruc.2022.10.024 ↗
63. Deterioration and recovery of FRC after high temperature exposure10.1016/j.cemconcomp.2018.07.020 ↗
64. A comprehensive study on post-fire curing of recycled aggregate concrete
65. Effect of specimen shape, silica fume, and curing age on durability properties of self-compacting concrete incorporating coarse recycled concrete aggregates10.1016/j.conbuildmat.2019.117054 ↗
66. Soniscope tests concrete structures
67. IS, Method of Non-destructive Testing of Concrete, (1992). Part 1: Ultrasonic Pulse Velocity Bureau of Indian Standard, New Delhi, India., (n.d.).
68. Neville · 1995
69. ACI-228.1R · 2019
70. Application of titanium gypsum as raw materials in cement-based self-leveling mortars
71. Effects of desulfurized gypsum on shrinkage behavior of alkali-activated slag (AAS) and hybrid alkali-activated cement (HAC)
72. Natural 1.1 and 1.4 nm tobermorites from Fuka, Okayama, Japan: chemical analysis, cell dimensions, 29Si NMR and thermal behavior10.1016/S0008-8846(03)00099-1 ↗