Application and performance evaluation of TMUF-MPCMs in concrete pavement: Mechanical behavior and durability investigation
Source abstract
Abstract
Concrete pavements in cold regions are highly susceptible to deterioration from freeze-thaw cycles, which challenge durability and maintenance. This study investigates the incorporation of 4% and 6% Tetradecane-Melamine-Urea-Formaldehyde microencapsulated phase-change materials (TMUF-MPCMs) in concrete mixtures to improve durability and thermal regulation. Microstructural analysis confirmed the successful synthesis of spherical, thermally stable microcapsules. While the addition of TMUF-MPCMs reduced workability (approximately 20% slump reduction) and compressive strength (by 26% and 30% for the 4% and 6% mixes, respectively), flexural strength improved significantly, with the 6% mixture exceeding FAA requirements. Most notably, TMUF-MPCMs dramatically enhanced freeze-thaw resistance, retaining over 90% of their relative dynamic modulus of elasticity after 300 cycles compared to 76% for conventional concrete, while exhibiting negligible mass loss and crack formation. Microstructural evidence suggests self-healing behavior through calcite precipitation at the microcapsule interfaces. A composite performance index ranked the 6% TMUF-MPCM mixture as optimal, and multi-objective optimization identified 5.9% as the ideal dosage to balance mechanical performance and durability. Despite some reduction in compressive strength, TMUF–MPCMs offer a promising dual-functional strategy to enhance the durability and sustainability of concrete pavements in cold regions. The self-healing response was confined to the microscale. At the same time, the potential reduction in deicer dependence is inferred from laboratory-based thermal and durability enhancements rather than verified under field conditions. • Using MPCMs to enhance durability and thermal regulation of concrete pavements. • Smart concrete behavior observed through self-healing and thermal regulation. • Optimal MPCM content identified around 6% for balanced performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Asphalt Pavement Performance Evaluation · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Pore structure response of reconstituted kaolin and illite-smectite mixed-layer rich clay to 1D compression10.1016/j.clay.2025.107892 ↗
2. Relationship between pore-size distribution and 1D compressibility of different reconstituted clays based on fractal theory10.3390/fractalfract9040235 ↗
3. Determination of initial void ratio of remolded clay using bayesian data fusion approach10.1520/GTJ20240111 ↗
4. Machine learning method to predict dynamic compressive response of concrete-like material at high strain rates10.1016/j.dt.2022.02.003 ↗
5. Experimental and numerical study on the torsional behavior of rectangular hollow reinforced concrete columns strengthened By CFRP
6. Aggregate-level 3D analysis of asphalt pavement deterioration using laser scanning and vision transformer10.1016/j.autcon.2025.106380 ↗
7. Eco-friendly bismuth vanadate/iron oxide yellow composite heat-reflective coating for sustainable pavement: urban heat island mitigation
8. BLOTTER: block-based lossless compression for highway structural health monitoring data
9. Examining the frost resistance of high performance concrete10.1016/j.conbuildmat.2008.04.006 ↗
10. Evaluation and reduction of temperature stresses in concrete pavement by using phase changing material10.1016/j.matpr.2020.04.214 ↗
11. Air-entrained air field self-consolidating concrete pavements: strength and durability10.1007/s40999-016-0104-4 ↗
12. The influence of calcium chloride deicing salt on phase changes and damage development in cementitious materials10.1016/j.cemconcomp.2015.09.006 ↗
13. Numerical simulations to quantify the influence of phase change materials (PCMs) on the early-and later-age thermal response of concrete pavements10.1016/j.cemconcomp.2017.04.006 ↗
14. F. Stoll, M. Drake, and I. Slayer, Use of Phase Change Materials to Prevent Overnight Freezing of Bridge Decks. TRB, IDEA Project Final Report. Contract NCHRP94ID022, 1996.
15. Incorporation of phase change materials in cementitious systems via fine lightweight aggregate10.1016/j.conbuildmat.2012.04.042 ↗
16. Synergistic effects of sporosarcina ureae and silica fume on self-healing and plastic shrinkage cracks in bio-green concrete pavement10.1016/j.rineng.2025.105526 ↗
17. Bio-FM-Spray restoration of concrete pavement: experimental investigation
18. Thermal energy storage for low and medium temperature applications using phase change materials–a review10.1016/j.apenergy.2016.05.097 ↗
19. Low temperature heat storage with phase change materials10.1080/01430750.1980.9675731 ↗
20. Use of phase change materials for thermal energy storage in concrete: an overview10.1016/j.conbuildmat.2013.04.031 ↗
21. Heat transfer characteristics of thermal energy storage system using PCM capsules: a review10.1016/j.rser.2007.06.009 ↗
22. Increasing the service life of bridge decks by incorporating phase-change materials to reduce freeze-thaw cycles10.1061/(ASCE)MT.1943-5533.0000381 ↗
23. Low temperature latent heat thermal energy storage: heat storage materials10.1016/0038-092X(83)90186-X ↗
24. Potential applications of phase change materials in concrete technology10.1016/j.cemconcomp.2007.04.007 ↗
25. Phase change material-based building architecture for thermal management in residential and commercial establishments10.1016/j.rser.2006.05.010 ↗
26. In situ poly (urea-formaldehyde) microencapsulation of dicyclopentadiene10.3109/02652040309178083 ↗
27. Fabrication of hollow melamine− formaldehyde microcapsules from microbubble templates10.1021/jp072131t ↗
28. Urea-formaldehyde resins synthesis, modification and characterization
29. Optimized composite lime cement plasters with phase change materials for enhanced building energy efficiency and comfort
30. Reviewing the potential of phase change materials in concrete pavements for anti-freezing capabilities and urban heat island mitigation10.3390/buildings13123072 ↗
31. Incorporating phase change materials in concrete pavement to melt snow and ice10.1016/j.cemconcomp.2017.09.002 ↗
32. Frost resistance and meso-deterioration analysis of microcapsulated phase change materials modified concrete
33. Mechanical properties and freeze-thaw durability of concrete modified with microencapsulated phase change materials10.1038/s41598-025-11371-6 ↗
34. The effect of phase change materials on the physical and mechanical properties of concrete made with recycled aggregate10.3390/buildings13102601 ↗
35. E.H. Alakara, İ. Demir, and C. Alkan, Effect of phase change material on mechanical and thermal properties of cementitious composites, International Journal of Engineering Research and Development, vol. 17, no. 2, pp. 370–382.
36. J. Xia, X. Hu, Y. Li, and W. Zhang, Experimental Study on Properties of Nano-Silicon Modified Microencapsulated Phase Change Materials Mortar, Structural Durability \& Health Monitoring, p. {pages}. [Online]. Available: 〈http://www.techscience.com/sdhm/online/detail/24055〉.
37. Experimental Study on Mechanical and Thermal Properties of Backfill Body with Paraffin Added10.3390/en17010217 ↗
38. INSO 389- Portland cement — Specifications- ICS:91.100.10, I. N. S. O. (INSO), 2020.
39. ASTM C1602/C1602M-22 · 2022
40. ASTM C33/C33M-18 · 2023
41. The behavior of self-compacting concrete containing micro-encapsulated phase change materials10.1016/j.cemconcomp.2009.08.002 ↗
42. Smart materials: cementitious mortars and PCM mechanical and thermal characterization10.3390/ma14154163 ↗
43. The influence of phase change materials on the properties of self-compacting concrete10.3390/ma6083530 ↗
44. Paraffin as a phase change material in concrete for enhancing thermal energy storage
45. ASTM C231-09a · 2010
46. ASTM C138/C138M-17a · 2023
47. ASTM C143/C143M- 20 · 2020
48. ASTM C39/C39M-99 · 2017
49. BS 5328: Concrete — Part 1–4 · 1981
50. ASTM C192/C192M-25 · 2025
51. ASTM C666-97 · 2017
52. ASTM C215-19 · 2020
53. Synthesis and characterization of melamine-formaldehyde microcapsules containing pyraclostrobin by in situ polymerization10.1134/S156009041806012X ↗
54. Synthesis, characterization and applications of microencapsulated phase change materials in thermal energy storage: a review10.1016/j.enbuild.2017.03.063 ↗
55. Synthesis, characterization and thermal properties of novel nanoencapsulated phase change materials for thermal energy storage10.1016/j.solener.2012.01.003 ↗
56. Synthesis and characterization of microencapsulated phase change material with phenol-formaldehyde resin shell for thermal energy storage10.1016/j.solmat.2022.111789 ↗
57. Synthesis of melamine-formaldehyde microcapsules containing oil-based fragrances via intermediate polyacrylate bridging layers10.1016/j.cjche.2018.10.023 ↗
58. Synthesis and characterization of microencapsulated paraffin with melamine-urea-formaldehyde shell modified with lignin10.1016/j.ijbiomac.2024.129640 ↗
59. Morphological study of surface-modified urea–formaldehyde microcapsules using 3-aminopropyltriethoxy silane10.1007/s00289-018-2425-8 ↗
60. Preparation of n-Tetradecane phase change microencapsulated polyurethane coating and experiment on anti-icing performance for wind turbine blades10.3390/coatings14050645 ↗
61. Thermal and mechanical behaviors of concrete with incorporation of strontium-based phase change material (PCM)10.1186/s40069-018-0326-8 ↗
62. AC 150/5320–6 G · 2021
63. Use of phase change materials in concrete: current challenges10.1051/rees/2019006 ↗
64. Compressive strength and hygric properties of concretes incorporating microencapsulated phase change material10.1016/j.conbuildmat.2019.06.156 ↗
65. Synergistic freeze-resistant strategy of multi-stage PCM concrete incorporated with rice husk ash and fly ash10.3390/buildings14092604 ↗
66. Analysis of freeze–thaw damage of cement mortars doped with polyethylene glycol-based form stable phase change materials10.3390/ma17153731 ↗
67. R. Deb, S. Visvalingam, and Y.A. Farnam, “Freeze-Thaw Durability Improvement of Concrete Composites Using Low-Temperature Phase Change Materials,” Available at SSRN 4813160, 2024.10.2139/ssrn.4813160 ↗
68. Effect of freeze-thaw cycles on the mechanical behavior of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials10.1016/j.conbuildmat.2018.12.057 ↗