Feasibility of solid waste-based geopolymers for anti-scouring protection of offshore scour pits: Macro-performance, micro-characterization, and sustainability
Source abstract
Abstract
This study proposes a method for anti-scour protection of offshore monopile foundations by using solid waste-based geopolymer materials. Fly ash (FA) and soda residue (SR) were mixed with sodium silicate (SS) solution to prepare fly ash-soda residue-based geopolymer paste (FSGP). Fluidity, setting time, anti-washout, unconfined compressive strength (UCS), and anti-scour properties were tested to assess its feasibility for offshore anti-scour protection. The reaction mechanism was revealed through microscopic methods. Additionally, pH value, chloride ion content tests, carbon emissions, and economic evaluations were conducted to assess its environmental compatibility and sustainability. The results indicated that higher FA content or less solution concentration improved fluidity and prolonged setting time, while increased SR content or solution concentration enhanced dispersion resistance and anti-scour performance. Amorphous C-S-H and C(N)-A-S-H gels formed within the FSGP system, filling pores and creating a dense microstructure that boosted strength. The optimal proportion, FS3C2 (20 %FA + 80 %SR, solution concentration of 2.5 mol/L), exhibited a fluidity of 210 mm, 1-day UCS, and anti-scour UCS of 0.38 MPa and 0.35 MPa, respectively, meeting specification requirements. Cl⁻ content and pH values were within marine environment-safe ranges, and Sustainability assessments indicated its ecological and economic benefits, highlighting its potential for sustainable development.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Materials Engineering and Processing · Geotechnical Engineering and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Review of the current status, technology and future trends of offshore wind farms10.1016/j.oceaneng.2020.107381 ↗
2. Performance of microbially induced calcite precipitation (MICP) as a local scour countermeasure for offshore wind turbine monopile foundation10.1016/j.ijsrc.2025.05.003 ↗
3. Development and prediction of scour around offshore wind turbine monopile foundations in ebb and flow tides10.1016/j.oceaneng.2024.118905 ↗
4. L.B. Ibsen, A. Asgari, M. Bagheri, A. BarariResponse of Monopiles in Sand Subjected to One-Way and Transient Cyclic Lateral Loading2014, 31232210.1061/9780784413425.032.10.1061/9780784413425.032 ↗
5. Experimental investigation on scour characteristics and predictive model of monopile foundations under breaking waves10.1016/j.coastaleng.2025.104764 ↗
6. Dynamic damage functions for scour protection at monopile foundations: application of ensemble machine learning models10.1016/j.oceaneng.2025.120590 ↗
7. Preventing scour of monopile foundations using a vertical rotation device10.1016/j.oceaneng.2024.118879 ↗
8. Deformation mechanisms for offshore monopile foundations accounting for cyclic mobility effects10.1016/j.soildyn.2017.03.008 ↗
9. An experimental study of using artificial reefs as scour protection around an offshore wind monopile10.1016/j.oceaneng.2025.121932 ↗
10. A further study on the scour around the monopile foundation of offshore wind turbines
11. Countermeasures for local scour around offshore wind turbine monopile foundations: a review10.1016/j.apor.2023.103764 ↗
12. An experimental study of the local scour protection methods around the monopile foundation of offshore wind turbines10.1016/j.oceaneng.2023.113957 ↗
13. Solidification sludge as a scour countermeasure in ocean engineering10.1016/j.oceaneng.2021.110423 ↗
14. Numerical study on residual rate of fluidized solidified slurry in pumping for scour repair around monopile10.1016/j.oceaneng.2023.114072 ↗
15. Experimental study on current-induced local scour and pre-embedded protective measures of multi-bucket jacket foundation for offshore wind turbines10.1016/j.coastaleng.2025.104703 ↗
16. Polymeric and cementitious mortars for the reconstruction of natural stone structures exposed to marine environments10.1016/j.compositesb.2010.08.007 ↗
17. Experimental investigation of equilibrium and temporal scour around the round head of the rubble mound breakwater in case of breaking and non-breaking waves10.1016/j.oceaneng.2024.119285 ↗
18. Experimental study on the scour characteristics around a jacket foundation under wave actions10.1016/j.oceaneng.2024.117290 ↗
19. Coastal scour stabilisation using granular filter in geosynthetic nonwoven containers10.1016/S0266-1144(99)00008-4 ↗
20. Enhancement on stability and strength of underwater concrete through liquid nitrogen freezing process: a sustainable approach for scour protection
21. Research and development of a new type of cement-based anti-scouring rapid setting grouting material and performance research10.1016/j.conbuildmat.2025.140480 ↗
22. Experimental study on scour protection method based on EICP with anti-permeation covers
23. Experimental study on the influence of fiber characteristics on the working property of underwater flowable solidified soil: flowability, anti-dispersion, strength and anti-scour resistance10.1016/j.oceaneng.2024.119230 ↗
24. Mechanical and structural analysis of metakaolin-based one-part geopolymers with the addition of magnesium oxide10.1016/j.conbuildmat.2025.142555 ↗
25. Strength and microstructural evaluation of sustainable geopolymer mortars using calcium carbonate sludge and fly ash as precursors
26. Geopolymers as a sustainable alternative to Portland cement: synthesis, durability, applications, environmental impacts, and cost analysis10.1016/j.rser.2025.116157 ↗
27. Preparation of coal gangue-based one-part geopolymers using solid activators with different Al/Si ratios
28. Study on the damage and degradation mechanism of green and sustainable coal gangue based geopolymer backfill under sulfate dry-wet cycle erosion10.1016/j.jece.2025.116695 ↗
29. Synergistic improvement of sulfate durability in hybrid geopolymer mortars incorporating blast furnace slag, waste andesite powder, and Portland cement10.1016/j.pce.2025.104055 ↗
30. Setting behavior, mechanical properties and microstructure of seawater-mixed metakaolin-based geopolymers10.1016/j.conbuildmat.2025.143200 ↗
31. Optimization design for alkali-activated slag-fly ash geopolymer concrete based on artificial intelligence considering compressive strength, cost, and carbon emission
32. Development and optimization of geopolymer-based 3D printing materials utilizing industrial solid waste: rheological properties and practical applications10.1016/j.conbuildmat.2025.142719 ↗
33. Long-term durability of sustainable all-solid waste-based foamed geopolymers: hydrophobic modification for chemical resistance and heavy metal solidification
34. Enhancing the erosion resistance of high-performance geopolymer concrete through the synergistic optimization of simplex centroid design and multi-walled carbon nanotubes10.1016/j.conbuildmat.2025.142869 ↗
35. Efficient utilization of coral waste for internal curing material to prepare eco-friendly marine geopolymer concrete10.1016/j.jenvman.2024.122173 ↗
36. Study on novel alkali-activated cementitious grout for scour control of offshore foundation
37. Effects of hydroxypropyl methylcellulose on anti-dispersion and rheology of alkali-activated materials in underwater engineering10.1016/j.conbuildmat.2023.132135 ↗
38. Innovative underwater material from recycled spoil for scour hole remediation in offshore wind foundations
39. Geopolymeric subaqueous lightweight fill material derived by waste spoil in construction: mechanical and microstructural analysis
40. Seawater-based underwater anti-dispersive flowable material for offshore scour pit repair: behavior and microstructural mechanisms10.1016/j.conbuildmat.2025.143385 ↗
41. Predictive theoretical model for elastic modulus of marine geopolymer concrete: insights into micro-mesoscopic components and alkaline content effects10.1016/j.compstruc.2025.107876 ↗
42. Experimental and analytical investigation of long-term bond performance of basalt FRP-geopolymer concrete with varying alkalinities in marine environment10.1016/j.engstruct.2025.119611 ↗
43. Long-term durability investigation of basalt fiber-reinforced geopolymer concrete in marine environment10.1016/j.jmrt.2024.06.078 ↗
44. GB/T 8077-2023[S], Methods for Testing Uniformity of Concrete Admixtures, China Admini. Press.: Beijing, China (2023).
45. GB/T 1346-2024[S], Test Methods for Water Requirement of Standard Consistency, Setting Time and Soundness of the Portland Cement, China Admini. Press.: Beijing, China (2024).
46. DLT 5117-2021 [S], Test Code on Anti-washout Underwater Concrete, China Admini. Press.: Beijing, China (2021).
47. DLT 5207-2021 [S], Technical Specification for Abrasion and Cavitation Erosion Resistance of Concrete in Hydraulic Structures, China Admini. Press.: Beijing, China (2021).
48. ASTM E1508-12a (2019). Stanard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy.
49. ASTM E1426-14(2019). Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques.
50. ASTM E1252-98(2021). Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis.
51. ASTM D 6103M-17 (2021). Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM).
52. Solidification sludge as a scour countermeasure in ocean engineering10.1016/j.oceaneng.2021.110423 ↗
53. A century of research on calcium silicate hydrate (C–S–H): leaping from structural characterization to nanoengineering
54. Geopolymer mortars as sustainable repair material: a comprehensive review10.1016/j.rser.2017.05.076 ↗
55. Synthesis and characterization of fly ash geopolymer paste for goaf backfill: reuse of soda residue10.1016/j.jclepro.2020.121045 ↗
56. Physical and mechanical properties and micro characteristics of fly ash-based geopolymers incorporating soda residue10.1016/j.cemconcomp.2019.02.009 ↗
57. Assessment, identifying, and presenting a plan for the stabilization of loessic soils exposed to scouring in the path of gas pipelines, case study: Maraveh-Tappeh city10.1016/j.enggeo.2024.107747 ↗
58. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
59. Capillary water absorption and strength of solidified marine soft soil10.1016/j.conbuildmat.2024.135729 ↗
60. Strength, microstructure, CO2 emission and economic analyses of low concentration phosphoric acid-activated fly ash geopolymer10.1016/j.conbuildmat.2023.130920 ↗
61. Hybrid portland cement-slag-based geopolymer mortar: strength, microstructural and environmental assessment10.1016/j.psep.2025.106771 ↗
62. Eco-friendly and cost-effective self-compacting concrete using waste banana leaf ash