Stabilization of coarse-grained mixed soils from landslide deposits in Southeastern Tibet using PVA-based composite materials: Mechanical properties and micro-mechanisms
Source abstract
Abstract
The coarse-grained mixed soils from landslide deposits in southeastern Tibet pose significant risks to infrastructure due to their poor engineering properties, exacerbated by high seismicity and rainfall. This study introduces an environmentally sustainable stabilization method utilizing polyvinyl alcohol (PVA)-based composites as a low-carbon, non-alkaline alternative to conventional cement. The research investigates the synergistic effects of silica fume (SF) and polypropylene (PP) fibers on the shear strength and deformation behavior of these challenging soils. Large-scale direct shear tests were conducted on specimens stabilized with varying dosages of PVA solution (6-14%), SF (2-15%), and PP fibers (0.1-1%) under confining pressures ranging from 100 to 400 kPa, complemented by scanning electron microscopy (SEM) analysis to elucidate underlying micro-mechanisms. Results demonstrate that 10% PVA solution represents the optimal concentration, transforming the soil's stress-strain response from strain-hardening to strain-softening behavior while increasing cohesion to 187.5 kPa. The incorporation of 5-10% SF further amplified peak shear strength by 25-40% through microstructural densification, whereas 0.25-0.5% PP fiber content significantly enhanced ductility, reducing the brittleness index by up to 66% through crack-bridging and anchoring mechanisms. SEM analysis revealed that PVA forms a three-dimensional elastic network encapsulating soil particles, a mechanism optimized by the composite additives. These findings establish a cost-benefit framework for material selection, with optimal formulations identified as 10% PVA combined with 5-10% SF for high-strength applications and 10% PVA with 0.25-0.5% PP fibers for ductile, energy-absorbing applications. The proposed stabilization approach offers potential for enhancing infrastructure resilience in seismically active, ecologically sensitive mountain regions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Landslides and related hazards · Geotechnical Engineering and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Failure probability assessment of landslides triggered by earthquakes and rainfall: a case study in yadong county, Tibet, China
2. Mobilized strength of gravelly sliding zone soil in reactivated landslide: a case study of a giant landslide in the north-eastern margin of Tibet plateau10.1007/s12665-021-09638-y ↗
3. Evaluation of landslides susceptibility in southeastern Tibet considering seismic sensitivity10.1016/j.heliyon.2024.e36800 ↗
4. Spatio-temporal prediction of three-dimensional stability of highway shallow landslides in southeast Tibet based on TRIGRS and Scoops3D coupling model10.3390/w16091207 ↗
5. Formation and reactivation mechanisms of large-scale ancient landslides in the longwu river basin in the northeast Tibetan plateau, China10.1007/s11629-021-7261-x ↗
6. Seismic landslide risk assessment based on landslide density optimized newmark model: new insights from the xianshuihe fault zone in the eastern Tibetan plateau, China
7. A review of recent earthquake-induced landslides on the Tibetan plateau10.1016/j.earscirev.2023.104534 ↗
8. Co-seismic landslide hazard assessment of the 2017 ms 6.9 milin earthquake, Tibet, China, combining the logistic regression–information value and newmark displacement models10.1007/s10064-022-02901-x ↗
9. Thermal effects on the stability of geosynthetic reinforced soil walls
10. The performance of foundations on various soils stabilized by the vibro-compaction method10.1139/t74-056 ↗
11. A super-large landslide in Tibet in 2000: background, occurrence, disaster, and origin10.1016/S0169-555X(02)00358-6 ↗
12. Chemical speciation, distribution, and leaching behaviors of heavy metals in alkali-activated converter steel slag-based stabilization/solidification of MSWI FA10.1016/j.conbuildmat.2024.135209 ↗
13. Stabilization of micaceous residual soil with industrial and agricultural byproducts: perspectives from hydrophobicity, water stability, and durability enhancement10.1016/j.conbuildmat.2024.136450 ↗
14. Experimental study on the mechanical behaviour of silty soil stabilized with polyurethane10.1016/j.conbuildmat.2024.135251 ↗
15. Assessment, identifying, and presenting a plan for the stabilization of loessic soils exposed to scouring in the path of gas pipelines, case study: Maraveh-Tappeh city10.1016/j.enggeo.2024.107747 ↗
16. The influence of basalt fiber filament length on shear strength development of chemically stabilized soils for ground improvement10.1016/j.conbuildmat.2023.130930 ↗
17. The engineering behind soil stabilization with additives: a state-of-the-art review10.1007/s10706-023-02554-x ↗
18. Effect of grout pressure and grout flow on soil physical and mechanical properties in jet grouting operations10.1016/j.ijrmms.2008.10.005 ↗
19. Conversion of the waste drilling mud to renewable grouting materials in deep shaft sinking10.1016/j.conbuildmat.2022.129851 ↗
20. Environmental sustainability in combating wind erosion: chemical stabilization of sand dunes using acidic mulching10.1016/j.rineng.2024.103758 ↗
21. Stabilization of expansive soils using chemical additives: a review10.1016/j.jrmge.2022.02.011 ↗
22. Innovative ground improvement with chemical grouts: potential and limits of partial saturation with polymers10.1007/s10706-022-02301-8 ↗
23. Review of chemical stabilizing agents for improving the physical and mechanical properties of loess10.1007/s10064-021-02486-x ↗
24. High-efficiency stabilization of dredged sediment using nano-modified and chemical-activated binary cement10.1016/j.jrmge.2022.12.007 ↗
25. Mechanical-thermal activated dredged sludge as a supplementary cementitious material: microstructure reconstruction and pozzolanic activity enhancement10.1016/j.conbuildmat.2025.141256 ↗
26. Life cycle assessment of biocemented sands using enzyme induced carbonate precipitation (EICP) for soil stabilization applications10.1038/s41598-022-09723-7 ↗
27. Global strategies and potentials to curb CO2 emissions in cement industry10.1016/j.jclepro.2012.10.049 ↗
28. Challenges against CO2 abatement strategies in cement industry: a review10.1016/j.jes.2020.11.020 ↗
29. Projecting future carbon emissions from cement production in developing countries10.1038/s41467-023-43660-x ↗
30. Challenges toward carbon neutrality in China: strategies and countermeasures10.1016/j.resconrec.2021.105959 ↗
31. Determining the water content and void ratio of cement-treated dredged soil from the hydration degree of cement10.1016/j.enggeo.2020.105892 ↗
32. Multi-scale investigation on curing time effect of lime stabilized red mudstone as fill material for high-speed railway subgrade10.1016/j.conbuildmat.2024.137749 ↗
33. Cementitous material based stabilization of soft soils by stabilizer: feasibility and durabiliy assessment10.1016/j.conbuildmat.2024.136046 ↗
34. Intermediate soil acidification induces highest nitrous oxide emissions10.1038/s41467-024-46931-3 ↗
35. Soil contamination and carrying capacity across the Tibetan plateau using structural equation models10.1016/j.envpol.2023.122640 ↗
36. Depth-dependent drivers of soil aggregate carbon across Tibetan alpine grasslands10.1016/j.scitotenv.2023.161428 ↗
37. Heavy metals impact environmental capacity of oasis soils in Qinghai-Tibet plateau dry zone10.1038/s41598-025-86059-y ↗
38. A state-of-the-art review on interactive mechanisms and multi-scale application of biopolymers (BPs) in geo-improvement and vegetation growth10.1016/j.jenvman.2024.120905 ↗
39. Sustainable construction materials: application of chitosan biopolymer, rice husk biochar, and hemp fibers in geo-structures
40. Water-soluble polymers in cementitious materials: a comprehensive review of roles, mechanisms and applications
41. Strength characterization of cohesionless soil treated with cement and polyvinyl alcohol10.1016/j.sandf.2022.101238 ↗
42. The effect of polyvinyl alcohol solution with a high degree of alcoholysis on the expansion and cracking behaviour of quicklime-treated soil in earthen sites10.1007/s10064-021-02165-x ↗
43. Performance of silty sand reinforced with aqueous solution of polyvinyl alcohol subjected to freeze-thaw cycles10.1016/j.coldregions.2020.103054 ↗
44. Feasibility of protecting earthen sites by infiltration of modified polyvinyl alcohol10.1016/j.conbuildmat.2019.01.113 ↗
45. Enhancement of storage stability and rheological properties of polyethylene (PE) modified asphalt using cross linking and reactive polymer based additives10.1016/j.conbuildmat.2018.08.155 ↗
46. The impacts of nano-SiO2 and silica fume on cement kiln dust treated soil as a sustainable cement-free stabilizer10.1016/j.conbuildmat.2021.122918 ↗
47. Experimental studies on mechanical and expansion characteristics of cement-stabilized saline soil reinforced with activated silica fume
48. Experimental studies on compressive and tensile strength of cement-stabilized soil reinforced with rice husks and polypropylene fibers10.1016/j.conbuildmat.2022.128242 ↗
49. Investigating the effects of stabilization carried out using Fly ash and polypropylene fiber on the properties of highway clay soils10.1016/j.conbuildmat.2023.132590 ↗
50. Failure envelope of artificially cemented sand[J]10.1680/geot.11.P.037 ↗
51. Parameters controlling stiffness and strength of artificially cemented soils10.1680/geot.8.P.084 ↗
52. Critical state shear strength of an unsaturated artificially cemented sand10.1680/jgeot.15.P.042 ↗
53. The influence of curing under stress on the triaxial response of cemented soils10.1680/geot.2000.50.1.99 ↗
54. PVA fiber/cement-based interface in silane coupler KH560 reinforced high performance concrete–Experimental and molecular dynamics study10.1016/j.conbuildmat.2023.132184 ↗
55. Multi-scale investigation of interfacial enhancement in KH560-modified carbon fiber reinforced concrete10.1617/s11527-025-02689-8 ↗
56. Influence of fiber and cement addition on behavior of sandy soil10.1061/(ASCE)1090-0241(1998)124:12(1211) ↗
57. A method for simulating rock with inherent microcracks and calibrate its microscopic parameters