Experimental study on the hydrophysical properties of grey bricks modified with amide polymers

The brick walls of ancient buildings have got a lot of tiny and closely connected pores inside, so they can soak up water really well. This can easily cause problems like getting powdery and having efflorescence. To stop water from spoiling the grey bricks, this paper focuses on the brick walls of historical buildings in Kaifeng City. Based on our investigation, we study the distribution features of the problems. This paper tells about using the method of negative pressure infiltration to change the grey bricks. We measure all kinds of basic indicators and analyze how different ratios of modifiers affect the water properties and dry-wet cycle tests of the grey bricks. We look at the changes in the inside shape through SEM to show how it changes the grey bricks of ancient buildings. Second, we improve the wet walls by using a way that combines blocking and drainage. The main things we studied and the conclusions are like this: We use sodium methyl silicate and acrylamide polymer as modifiers to soak the historical grey bricks under negative pressure. We figure out the best ratio through orthogonal experiments. We analyze things like the water vapor permeability, how long it takes for a water drop to go through, the compressive strength, the water absorption rate, and the height of water absorption of the modified bricks. The results show that the crosslinking agent and acrylamide monomer have a big influence on how high the capillary water goes up in the modified bricks. The air permeability of the modified grey bricks with acrylamide polymer goes down a bit, but it's still okay. The surface of the modified grey bricks is very hydrophobic and there are fewer pores inside. The mechanical properties of the modified grey bricks get better in different degrees. The water absorption rate and the height of capillary water absorption go down. The modified grey bricks can really cut down the erosion of water on the wall when used in real life. They can reduce salt crystallization and efflorescence caused by rising water, and so make the brick walls of historical buildings last longer. This is super important for protecting historical buildings in Kaifeng City and taking care of other similar structures. Also, by using a way that combines blocking and drainage, and putting polymer infiltration reinforcement and the ventilation of the moisture drainage pipe together, the results show that this combination can really lower the height that capillary water goes up in the brick wall. So we get a way to control how wet the wall is.