An investigation into the microstructural evolution and shrinkage control in internally cured mortars with milkweed fibres
Source abstract
Abstract
This study presented a significant advancement in the use of Milkweed (MW) fibres as internal curing agents in low water-to-cement (w/c) cementitious materials. The research focused on how different pre-treated MW fibres, with different composition, can impact internal curing efficacy in reducing autogenous shrinkage of cement mortars. In addition, the hydration behaviour and microstructural development were revealed using a series of tests including setting time, compressive strength, flexural strength, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA/DTG). A key finding of this study is the remarkable reduction in autogenous shrinkage, with using 0.1% wt. pre-treated MW fibres leading to up to 28% reduction at 7 days, compared to plain mortars. Furthermore, internal curing effect resulted in narrowing the compressive strength gap between the reference mixes and those with pre-treated MW fibres in the later stages of hydration. It was also found that the removal of hemicellulose through hybrid treatment can reduce the delay in the final setting time of cement from 45 minutes to 18 minutes. Additionally, while the incorporation of N- and HT-treated MW fibres had negligible effects on drying shrinkage, the inclusion of HY-treated MW fibres led to a 15% increase in drying shrinkage at 7 days. This difference in behaviour was attributed to the presence of lignin in N- and HT-treated fibres. Lignin was found to play a crucial role in influencing the drying shrinkage, microstructural development, and mechanical properties of MW fibre-incorporated cementitious mixes. Acting as a protective barrier, lignin shielded the MW fibres from cement infiltration into their lumina. Moreover, it served as both a physical and chemical barrier, reducing moisture transport through the capillary network during drying. In conclusion, this study demonstrated the potential of using pre-treated MW fibres as internal curing agents to effectively reduce autogenous shrinkage, with minimal compromise in terms of the compressive strength of cementitious composites.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Properties and Behavior · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Effect of Super-Absorbent polymer (SAP) Incorporation method on mechanical and shrinkage properties of internally cured concrete10.3390/ma15217854 ↗
2. Studies of the physical properties of hardened portland cement paste
3. Application of three self-developed ECT sensors for monitoring the moisture content in sand and mortar10.1016/j.conbuildmat.2020.121008 ↗
4. Investigation of mechanical properties and shrinkage of ultra-high performance concrete: Influence of steel fiber content and shape10.1016/j.compositesb.2019.107021 ↗
5. Utilization of natural sisal fibers to manufacture eco-friendly ultra-high performance concrete with low autogenous shrinkage10.1016/j.jclepro.2021.130105 ↗
6. Mitigation techniques for autogenous shrinkage of ultra-high-performance concrete–A review10.1016/j.compositesb.2019.107456 ↗
7. Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: Results of a RILEM round-robin test10.1617/s11527-013-0078-5 ↗
8. Effects of fine LWA and SAP as internal water curing agents10.1007/s40069-014-0076-1 ↗
9. Reducing the cracking potential of ultra-high performance concrete by using Super Absorbent Polymers (SAP)
10. Mechanisms of internal curing water release from retentive and non-retentive superabsorbent polymers in cement paste10.1016/j.cemconres.2021.106494 ↗
11. Can superabsorent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength?10.1016/j.conbuildmat.2011.12.062 ↗
12. Recommendation of RILEM TC 260-RSC: using superabsorbent polymers (SAP) to mitigate autogenous shrinkage10.1617/s11527-018-1241-9 ↗
13. Internal Curing: a 2010 State-of-the- Art Review
14. J. Weiss, D. Bentz, A. Schindler, P. Lura, Internal Curing, Structure. (2012) 10–14. 〈http://scholar.google.com/scholar?hl=en&btnG=Search&q=intitle:No+Title#0〉.
15. Influence of cement paste matrix properties on the autogenous curing of high-performance concrete10.1016/S0958-9465(03)00082-9 ↗
16. Assessing lightweight aggregate efficiency for maximizing internal curing performance
17. Environmentally friendly superabsorbent polymers for water conservation in agricultural lands
18. Effect of calcined bauxite powder or aggregate on the shrinkage properties of UHPC10.1016/j.cemconcomp.2021.103967 ↗
19. Effect of abaca natural fiber on the setting behavior and autogenous shrinkage of cement composite
20. Lechugilla natural fiber as internal curing agent in self compacting concrete (SCC): mechanical properties, shrinkage and durability10.1016/j.cemconcomp.2020.103686 ↗
21. Effectiveness of treated flax fibers in improving the early age behavior of high-performance concrete
22. Hydration and internal curing properties of plant-based natural fiber-reinforced cement composites
23. Reinforcing mechanisms of coir fibers in light-weight aggregate concrete
24. Key mechanisms controlling internal curing performance of natural fibers10.1016/j.cemconres.2018.02.007 ↗
25. Application of sisal fiber powder in ultra-high performance concrete: a renewable material for mitigating autogenous shrinkage10.1016/j.conbuildmat.2024.136304 ↗
26. Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites10.1016/S0958-9465(99)00039-6 ↗
27. Bamboo and wood fibre cement composites for sustainable infrastructure regeneration10.1007/s10853-006-0224-3 ↗
28. Degradation mechanisms of natural fiber in the matrix of cement composites10.1016/j.cemconres.2015.02.019 ↗
29. Cement hydration in the presence of wood extractives and pozzolan mineral additives
30. The effect of a zirconium dioxide sol-gel treatment on the durability of flax reinforcements in cementitious composites10.1016/j.cemconres.2018.10.004 ↗
31. Development of vegetable fibre-mortar composites of improved durability10.1016/S0958-9465(02)00018-5 ↗
32. Effect of surface biopolymeric treatment on sisal fiber properties and fiber-cement bond
33. Impact of fiber treatment on the oil absorption characteristics of plant fibers10.15376/biores.11.3.6452-6463 ↗
34. Effect of fiber length and treatments on the hygroscopic properties of milkweed fibers for superabsorbent applications10.1016/j.eti.2022.102930 ↗
35. Enhancing hydration and internal curing in cementitious mixes: the impact of pre-treated milkweed fibres
36. Characterization of components of milkweed floss fiber10.1080/01496395.2018.1556691 ↗
37. Hollow floss fibers characterization and potential industrial applications
38. Mixture proportioning for internal curing
39. Internal curing by superabsorbent polymers in ultra-high performance concrete10.1016/j.cemconres.2015.05.005 ↗
40. Effect of internal curing with super absorbent polymers on autogenous shrinkage of concrete at early age10.1016/j.conbuildmat.2015.12.115 ↗
41. Early-age hydration and shrinkage of cement paste with coir fibers as studied by Nuclear Magnetic Resonance10.1016/j.conbuildmat.2022.127460 ↗
42. Autogenous and drying shrinkage of mortars based on Portland and calcium sulfoaluminate cements10.1617/s11527-020-01561-1 ↗
43. Research on water transport behaviors and hydration characteristics of internal curing pavement concrete10.1016/j.conbuildmat.2020.118714 ↗
44. Retarding Effect of Hemp Hurd Lixiviates on the Hydration of Hydraulic and CSA Cements
45. Sugar cane bagasse fibre reinforced cement composites. Part I. Influence of the botanical components of bagasse on the setting of bagasse/cement composite10.1016/S0958-9465(02)00003-3 ↗
46. Mechanical properties of hemp fibre reinforced cement: influence of the fibre/matrix interaction10.1016/j.jeurceramsoc.2007.05.019 ↗
47. The retarding action of sugars on cement hydration10.1016/0008-8846(83)90084-4 ↗
48. WOOD-cement compatibility review
49. Analyses and models of the autogenous shrinkage of hardening cement paste: I. Modelling at macroscopic scale10.1016/0008-8846(95)00140-8 ↗
50. The effects of humidity and surface free energy on adhesion force between atomic force microscopy tip and a silane self-assembled monolayer film10.1557/JMR.2010.0060 ↗
51. Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions10.1016/j.cemconcomp.2009.04.003 ↗
52. Drying and autogenous shrinkage of pastes and mortars with activated slag cement10.1016/j.cemconres.2007.11.002 ↗
53. S. Lin, Early Age Deformation Characteristics of High Performance Concrete, (2003).
54. Determination of Eigenstresses in Hardening Concrete
55. Nano-engineered ultra-high performance concrete for controlled autogenous shrinkage using nanocellulose10.1016/j.cemconres.2020.106217 ↗
56. Early-age autogenous and drying shrinkage behavior of cellulose fiber-reinforced cementitious materials10.1016/j.cemconcomp.2010.10.018 ↗
57. Free, restrained and drying shrinkage of cement mortar composites reinforced with vegetable fibres10.1016/j.cemconcomp.2004.09.005 ↗
58. Integrated view of shrinkage deformation
59. Curing, hydration, and microstructure of cement paste
60. Mitigating autogenous shrinkage in HPC by internal curing using superabsorbent polymers
61. Mitigating autogenous shrinkage by internal curing
62. Investigating the effects of material and process variables on the mechanical properties of low-density thermally bonded nonwovens produced from Estabragh (milkweed) natural fibers10.1177/1528083715591593 ↗
63. Composites based on natural fibre fabrics
64. A review of the use of natural fibers in cement composites: concepts, applications and Brazilian history10.3390/polym14102043 ↗
65. Bamboo as reinforcement in structural concrete elements10.1016/j.cemconcomp.2004.06.002 ↗
66. Evolution of the interfacial transition zone and the degradation mechanism of zirconia treated flax fabric reinforced cementitious composites10.1016/j.conbuildmat.2018.09.104 ↗
67. The effect of adding different types of natural fibers on mechanical properties and impact resistance of concrete10.19026/rjaset.9.2602 ↗
68. The mechanical strength, degree of hydration, and electrical resistivity of cement pastes modified with superabsorbent polymers10.1016/j.conbuildmat.2015.12.082 ↗
69. Microstructure refinement and affected zone reinforcement for internal curing cement paste by composite microgel with nano silica10.1016/j.cemconcomp.2023.105013 ↗
70. Effect of processing variables on efficiency of eucalyptus pulps for internal curing10.1016/j.cemconcomp.2012.11.006 ↗
71. A review on natural fiber-reinforced geopolymer and cement-based composites10.3390/ma13204603 ↗