Investigation on effects of sludge and limestone in sustainable infrastructure: From performance optimization to carbon reduction
Source abstract
Abstract
This study presents a novel sludge ash and limestone cementitious (SSLC) composite tailored for construction, addressing the critical needs for durability, sustainability, and resilience in harsh environments. The experimental work systematically evaluates the flowability, mechanical properties, and chloride ion resistance of the SSLC paste under varying mix proportions. Through advanced techniques such as SEM, XRD, and thermodynamic simulations, the hydration mechanisms and microstructural evolution are comprehensively explained. The findings reveal that the synergistic incorporation of sludge ash and limestone optimizes pore structures, enhances the formation of carbonate-based hydration products, and significantly improves long-term properties, including a 34 % reduction in chloride ion concentration and a 5.98 % increase in flexural strength after 365 days. Additionally, the SSLC paste demonstrates a 23.43 % reduction in carbon emissions and a 22.22 % decrease in production costs, offering a low-carbon, cost-effective solution for infrastructure. These results underscore the SSLC paste’s potential as a sustainable construction material for applications, providing enhanced durability, reduced environmental impact, and economic viability to meet the challenges of modern engineering.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Technology, Carbon emissions of infrastructure development
2. Factory-level measurements on CO2 emission factors of cement production in China10.1016/j.rser.2014.03.025 ↗
3. Potential energy savings and CO2 emissions reduction of China's cement industry10.1016/j.enpol.2012.03.036 ↗
4. Carbon dioxide emissions from the global cement industry10.1146/annurev.energy.26.1.303 ↗
5. The environmental profile of clinker, cement, and concrete: a life cycle perspective study based on Ecuadorian data10.3390/buildings12030311 ↗
6. China: emissions pattern of the world leader in CO2 emissions from fossil fuel consumption and cement production10.1029/2007GL032887 ↗
7. Worrell · World Best. Pract. Energy intensity Values Sel. Ind. Sect. · 2007
8. Low carbon technology roadmap of China cement industry
9. Eco-efficient cements: potential economically viable solutions for a low-CO2 cement-based materials industry10.1016/j.cemconres.2018.03.015 ↗
10. Assessing, understanding and unlocking supplementary cementitious materials10.21809/rilemtechlett.2016.12 ↗
11. Strain-hardening alkali-activated fly ash/slag composites with ultra-high compressive strength and ultra-high tensile ductility10.1016/j.cemconres.2022.107075 ↗
12. Energy demand flexibility potential in cement industries: how does it contribute to energy supply security and environmental sustainability?10.1016/j.apenergy.2024.124608 ↗
13. Combined use of sewage sludge ash and recycled glass cullet for the production of concrete blocks10.1016/j.jclepro.2017.10.140 ↗
14. Overview of the policies for phasing out ocean dumping of sewage sludge in the Republic of Korea10.3390/su12114553 ↗
15. Review on the effect of sewage sludge ash on the properties of concrete10.1016/j.conbuildmat.2024.138296 ↗
16. Mechanical properties and durability of alkali-activated fly ash-municipal sludge concrete10.1016/j.conbuildmat.2024.135515 ↗
17. Formulation of mortars with marine sediments
18. Evaluation of the performance of fiber-reinforced mortars based on dredged sludge10.4028/p-KiAW2W ↗
19. Mechanical properties and microstructural characteristics of seawater-mixed sintered sludge cement paste10.1016/j.conbuildmat.2024.134996 ↗
20. Effect of cement and quarry dust on shear strength and hydraulic characteristics of lithomargic clay10.1007/s10706-011-9477-y ↗
21. Methodologies for evaluating sawability of ornamental granite and relation modeling combining sawability with environmental impacts: an application in a stone industrial park of China10.1016/j.jclepro.2019.119004 ↗
22. Granitic quarry sludge waste in mortar: effect on strength and durability10.1016/j.conbuildmat.2013.05.098 ↗
23. Use of granite sludge wastes for the production of coloured cement-based mortars10.1016/j.cemconcomp.2010.06.003 ↗
24. Assessment of strength development in cemented coastal silt admixed granite powder10.1016/j.conbuildmat.2019.01.231 ↗
25. Effect of stone powder on the rheological and mechanical performance of cement-stabilized marine clay/sand10.1016/j.conbuildmat.2020.120792 ↗
26. Rheological properties of highly flowable mortar containing limestone filler-effect of powder content and W/C ratio10.1016/j.cemconres.2004.05.008 ↗
27. Rheology of cementitious paste with silica fume or limestone10.1016/j.cemconres.2007.08.012 ↗
28. Effect of limestone and granite stone powder on properties of cement-treated clay composites and their socioeconomic and environmental impacts10.1016/j.conbuildmat.2023.132064 ↗
29. Seawater sea-sand engineered geopolymer composites (EGC) with high strength and high ductility10.1016/j.cemconcomp.2023.104998 ↗
30. High-strength seawater sea-sand engineered cementitious composites (SS-ECC): mechanical performance and probabilistic modeling10.1016/j.cemconcomp.2020.103740 ↗
31. Seawater sea-sand engineered/strain-hardening cementitious composites (ECC/SHCC): assessment and modeling of crack characteristics10.1016/j.cemconres.2020.106292 ↗
32. Analysis of creep process of marine concrete
33. Impact of alternative cementitious material on the mechanical and transfer properties of concrete
34. Improving sulfate and chloride resistance in eco-friendly marine concrete: alkali-activated slag system with mineral admixtures
35. Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement10.1016/j.cemconres.2007.08.017 ↗
36. Estimating reaction kinetics of cementitious pastes containing fly ash10.1016/j.cemconcomp.2020.103655 ↗
37. Recycling use of sulfate-rich sewage sludge ash (SR-SSA) in cement-based materials: assessment on the basic properties, volume deformation and microstructure of SR-SSA blended cement pastes10.1016/j.jclepro.2020.124511 ↗
38. Experimental analysis of strength and durability properties of cement binders and mortars with addition of microfine sewage sludge ash (SSA) particles
39. Study on the properties of autoclaved aerated concrete with high content concrete slurry waste
40. Dielectric and mechanical properties of cement pastes incorporated with magnetically aligned reduced graphene oxide
41. Influence of different alkali sulfates on the shrinkage, hydration, pore structure, fractal dimension and microstructure of low-heat Portland cement, medium-heat Portland cement and ordinary Portland cement10.3390/fractalfract5030079 ↗
42. The early-age cracking sensitivity, shrinkage, hydration process, pore structure and micromechanics of cement-based materials containing alkalis with different metal ions
43. Simulation of low-heat Portland cement permeability and thermal conductivity using thermodynamics
44. Performance and microstructure of sintered sludge ash-modified cement paste
45. Properties, compatibility, environmental benefits and future directions of limestone calcined clay cement (LC3) concrete: a review10.1016/j.jobe.2023.107794 ↗
46. Hydration behavior and thermodynamic modelling of ferroaluminate cement blended with steel slag
47. Hydration behavior and strength development of supersulfated cement prepared by calcined phosphogypsum and slaked lime
48. Hydration and durability of low-heat cementitious composites for dam concrete: thermodynamic modeling and experiments
49. A calculation model for compressive strength of cleaner earth-based construction with a high-efficiency stabilizer and fly ash10.1016/j.jclepro.2018.02.153 ↗
50. Properties and characterization of green one-part geopolymer activated by composite activators10.1016/j.jclepro.2019.02.159 ↗
51. Preparation of cleaner one-part geopolymer by investigating different types of commercial sodium metasilicate in China10.1016/j.jclepro.2018.08.060 ↗
52. Energy-efficient thermal treatment of sewage sludge for its application in blended cements10.1016/j.jclepro.2015.09.072 ↗