journal article·2025-07Open access

Performance and mechanism of modified backfill grouting materials prepared from EPB shield fine-grained waste soil for resource utilization

Dazeng Sun, Wen Zhao, Qian Bai, Yaochuang Han, Gaoyang Peng

Abstract

The construction process of the shield generates a considerable quantity of discharged soil. The residual fine-grained waste soil resulting from the discharge soil screening process is now classified as a new solid waste for disposal. In order to optimize the utilization of fine-grained waste soil, it is proposed that it be employed in the preparation of shield backfill grouting materials in-situ. However, utilizing fine-grained waste soil does possess certain disadvantages, including poor fluidity, low strength and protracted setting time. To surmount these deficiencies, polymers have been developed with the specific purpose of modifying the grouting material. This study investigates the feasibility of preparing modified backfill grouting materials through the resource utilization of fine-grained waste soil. The fresh and hardened properties and micro-characterized of the grouting materials were tested under different mixture ratio. The results demonstrated that the incorporation of polymer into the grouting material can enhance initial fluidity, strength and improve other properties. The modest dosage of polymer can facilitate the hydration reaction , whereby the hydroxyl functional group on the polymer chain reacts with free Ca 2 + to form a complex mesh structure, achieving the combination of organic and inorganic to complete the modification. The water/solid mass ratio exerts the most significant influence on the diverse properties of the grouts. This study proposes a method for the utilization of fine-grained waste soil, following the screening of shield discharge soil, which is both feasible and effective. The method has been demonstrated to have a positive effect on low-carbon green tunnel construction .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Geotechnical Engineering and Soil Stabilization · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Investigation of feature contribution to shield tunneling-induced settlement using Shapley additive explanations method10.1016/j.jrmge.2022.01.002 ↗
2. Real-time prediction of shield moving trajectory during tunnelling10.1007/s11440-022-01461-4 ↗
3. Tunnelling-induced ground deformation subjected to the behavior of tail grouting materials10.1016/j.tust.2023.105253 ↗
4. Experimental study on the performance of shield tunnel tail grout in ground10.1016/j.undsp.2024.07.001 ↗
5. An innovative sustainable solution: Recycling shield-discharge waste soil as fine aggregate to produce eco-friendly geopolymer-based flowable backfill materials10.1016/j.eti.2024.103857 ↗
6. Mechanical properties and microstructure of SWGA-BF improved rock muck discharged from slurry shield tunnels10.1016/j.conbuildmat.2023.133969 ↗
7. Research on optimizing performance of new slurries for EPBS soil conditioning based on response surface method10.1016/j.conbuildmat.2023.130818 ↗
8. Recycling the discharged soil from EPBS tunnels as a soil conditioner and its rheological behaviors10.1016/j.jclepro.2023.138224 ↗
9. Evaluating the feasibility of muck from slurry shield tunnels as a growth medium for landscaping10.1080/10962247.2022.2051775 ↗
10. A. Zhou, H. Wei, H. Guo, W. Zhang, T. Liu, D. Zou, Mechanical performance and environmental potential of concrete with engineering sediment waste for sustainable built environment. Resour. Conserv. Recycl. 189, 106742. https://doi.org/10.1016/J.RESCONREC.2022.106742.10.1016/j.resconrec.2022.106742 ↗
11. Back-fill grout experimental test for discharged soils reuse of the large-diameter size slurry shield tunnel10.1007/s12205-016-0856-z ↗
12. A literature review on properties and applications of grouts for shield tunnel10.1016/j.conbuildmat.2019.117782 ↗
13. Eco-friendly shield muck-incorporated grouting materials: mix optimization and property evaluation for silty clay tunnel construction10.3390/app14198830 ↗
14. Recycling of discharged soil from EPB shield tunnels as a sustainable raw material for synchronous grouting10.1016/j.jclepro.2020.121947 ↗
15. Reuse of discharged soil from slurry shield tunnel construction as synchronous grouting material10.1061/(ASCE)CO.1943-7862.0002231 ↗
16. Research on reuse of silty fine sand in backfill grouting material and optimization of backfill grouting material proportions10.1016/j.tust.2022.104751 ↗
17. Research on the optimization of proportions for synchronous grouting material in composite muck during shield tunneling10.1016/j.jclepro.2024.144320 ↗
18. Application of geopolymer in synchronous grouting for reusing of the shield muck in silty clay layer10.1016/j.conbuildmat.2024.135345 ↗
19. Research on reuse of shield soil dregs on synchronous grouting materials and its application10.1016/j.conbuildmat.2023.133700 ↗
20. Research and implementation of eco-grouting material derived from shield tunneling muck
21. Investigation into the properties of two-component backfilling grouts prepared by substituting bentonite with slurry from slurry shield tunnelling treated by a hydrocyclone10.1016/j.tust.2024.106142 ↗
22. In situ resource reutilization of earth pressure balance (EPB) shield muck for the generation of novel synchronous grouting materials10.1016/j.conbuildmat.2024.135737 ↗
23. A state-of-art review on development and progress of backfill grouting materials for shield tunneling
24. Enhanced technology for sewage sludge advanced dewatering from an engineering practice perspective: a review10.1016/j.jenvman.2022.115938 ↗
25. The Potential of Recycling and Reusing Waste Materials in Underground Construction: A Review of Sustainable Practices and Challenges10.3390/su16124889 ↗
26. Clay dosage and water/cement ratio of clay-cement grout for optimal engineering performance10.1016/j.clay.2018.07.035 ↗
27. In-situ polymerization-modified cement composites: a critical review10.1016/j.conbuildmat.2024.138294 ↗
28. Investigation on fundamental properties and chemical characterization of water-soluble epoxy resin modified cement grout10.1016/j.conbuildmat.2021.123877 ↗
29. Mechanical and interface bonding properties of epoxy resin reinforced Portland cement repairing mortar10.1016/j.conbuildmat.2020.120715 ↗
30. Application of epoxy resins in building materials: progress and prospects10.1007/s00289-021-03577-1 ↗
31. Effects of epoxy, hardener, and diluent types on the workability of epoxy mixtures10.1016/j.conbuildmat.2017.10.008 ↗
32. The effects of sand washing waste and microwave curing on the dimensional stability of epoxy mortar10.1016/j.conbuildmat.2020.118892 ↗
33. Comprehensive performance study of materials after innovative utilizing epoxy resin curing of loess and river sand: mechanical properties, durability and microstructure10.1016/j.conbuildmat.2023.134184 ↗
34. Chemical interaction between polymer and cement in polymer-cement concrete
35. Experimental study on in-situ preparation of post-wall synchronous grouting materials for shield mud in Chengdu tunnel
36. Intelligent design and seawater mixing performance of new synchronous grouting materials in a pure-solid-waste framework10.1016/j.tust.2024.105877 ↗
37. 2023
38. China Association for Engineering Construction Standardization
39. Test Methods for Water Requirement of Normal Consistency, Setting Time and Soundness of the Portland Cement, General Administration of Quality Supervision
40. State Administration for Market Regulation
41. Effect of EVA on the fresh properties of cement paste10.1016/j.cemconcomp.2011.10.004 ↗
42. Status quo and prospect of harmless disposal and reclamation of shield muck in China
43. Influence of SBR latex and HPMC on the cement hydration at early age
44. Application of polymer cement repair mortar in underground engineering: a review
45. Friedel’s salt formation in sulfoaluminate cements: a combined XRD and 27 Al MAS NMR study10.1016/j.cemconres.2014.08.004 ↗
46. Cement–epoxy/water interfaces – Energetic, thermodynamic, and kinetic parameters by means of heat-conduction microcalorimetry10.1016/j.jcis.2009.11.017 ↗
47. Effect of magnesium on calcium silicate hydrate (C-S-H)10.1016/j.cemconres.2017.03.012 ↗
48. Carbonation of portland cement studied by diffuse reflection fourier transform infrared spectroscopy10.1007/s40069-013-0039-y ↗
49. Study on the effect of waterborne epoxy resins on the performance and microstructure of cement paste10.1016/j.conbuildmat.2018.02.096 ↗
50. Biocomposites from wheat straw nanofibers: Morphology, thermal and mechanical properties10.1016/j.compscitech.2007.05.044 ↗
51. Cement hydration and microstructure formation in the presence of water-soluble polymers10.1016/j.cemconres.2008.10.003 ↗
52. Polymer film formation in cement mortars modified with water-soluble polymers10.1016/j.cemconcomp.2014.11.015 ↗
53. Experimental investigations on the properties of epoxy-resin-bonded cement concrete containing sea sand for use in unreinforced concrete applications10.3390/ma12040645 ↗
54. Structure and micro-nanomechanical characterization of synthetic calcium–silicate–hydrate with Poly(Vinyl Alcohol)10.1016/j.cemconcomp.2014.01.004 ↗