The role of mixing sequence in shaping the 3D-printability of geopolymers
Source abstract
Abstract
This paper investigates the influence of sample preparation on a geopolymer composed of fly ash and ground granulated blast furnace slag, specifically designed for extrusion-based 3D printing. We examine the impact of geopolymerisation processes and evaluate their suitability for printing. Various methods, including penetration testing, slow penetration testing, uniaxial unconfined compression testing, ultrasonic wave transmission, heat flow analysis, and compressive strength testing, were employed to assess early structural buildup to gain insights into their effects on printability and buildability. Our results show that the way in which the liquid components are combined with the pecrusors is crucial for influencing the geopolymerisation rate and the geopolymer’s overall performance. By analysing the transition points of yield stress, calculating the Young’s modulus and examining green strength as an early indicator of compressive strength in the yet unset geopolymer, we accurately determine the printability duration using only small-scale laboratory tests, without physical printing tests. When liquid components are added individually, a high OH⁻ concentration locally increases pH and accelerates particle dissolution. By pre-mixing sodium hydroxide with water, the local pH decreases, the geopolymerisation rate is slowed down and the printability is prolonged. A homogeneous distribution of all liquids additionally leads to an even distribution of dissolved silicon ions. This accelerates geopolymerisation that the system becomes unprintable. Our measurements reveal that as structural condensation of the geopolymer begins, the rheological properties shift, rendering the material unsuitable for printing. The results demonstrate that optimised mixing strategies impact the suitability of the geopolymer for extrusion-based 3D printing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies · BIM and Construction Integration
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Mix design and fresh properties for high-performance printing concrete10.1617/s11527-012-9828-z ↗
2. Particle-bed 3D printing in concrete construction – possibilities and challenges10.1016/j.cemconres.2018.05.018 ↗
3. Fresh and hardened properties of 3D printable cementitious materials for building and construction10.1016/j.acme.2017.02.008 ↗
4. Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing10.1016/j.ceramint.2018.03.031 ↗
5. IAAC, 3D printed bridge, 〈https://iaac.net/project/3d-printed-bridge/〉, Accessed 14 January 2025.
6. Cementitious materials for construction-scale 3D printing: laboratory testing of fresh printing mixture10.1016/j.conbuildmat.2017.04.015 ↗
7. Mechanical properties and deformation behaviour of early age concrete in the context of digital construction10.1016/j.compositesb.2019.02.040 ↗
8. Early age mechanical behaviour of 3D printed concrete: numerical modelling and experimental testing10.1016/j.cemconres.2018.02.001 ↗
9. Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing10.1016/j.cemconcomp.2019.103344 ↗
10. Elastic buckling and plastic collapse during 3D concrete printing10.1016/j.cemconres.2020.106016 ↗
11. Direct printing test for buildability of 3D-printable concrete considering economic viability10.1016/j.autcon.2019.102986 ↗
12. Effect of surface moisture on inter-layer strength of 3D printed concrete10.1016/j.conbuildmat.2018.03.232 ↗
13. The European Cement Association, Cementing the European Green Deal: Reaching climate neutrality along the cement and concrete value chain by 2050 cementing the European green deal 2020.
14. A striking growth of CO2 emissions from the global cement industry driven by new facilities in emerging countries10.1088/1748-9326/ac48b5 ↗
15. A sustainable future for the European Cement and Concrete Industry: technology assessment for full decarbonisation of the industry by 2050
16. Reducing greenhouse gasses emissions by fostering the deployment of alternative raw materials and energy sources in the cleaner cement manufacturing process10.1016/j.jclepro.2016.04.145 ↗
17. S. de Bruyn, C. Jongsma, B. Kampman, B. Görlach, J. Thie, Energy-intensive industries: Challenges and opportunities in energy transition, 2020.
18. Prospective life cycle assessment of European cement production10.1016/j.resconrec.2023.106998 ↗
19. Geopolymers10.1007/BF01912193 ↗
20. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
21. Alkali-activated slag cements: kinetic studies10.1016/S0008-8846(97)00040-9 ↗
22. 2009
23. Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products10.1016/j.jhazmat.2006.02.044 ↗
24. Life cycle assessment of alkali-activated materials: a systematic literature review10.1007/s44242-023-00014-6 ↗
25. Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing10.1016/j.jclepro.2019.02.185 ↗
26. The development of a fly ash-based geopolymer for extrusion-based 3D printing, along with a printability prediction method
27. Penetration test as a fast method to determine yield stress and structural build-up for 3D printing of cementitious materials10.1016/j.cemconcomp.2021.104066 ↗
28. Comparison of physical and physicochemical methods for 3D printing application with the focus on the unconfined uniaxial compression test10.1016/j.conbuildmat.2023.132260 ↗
29. Evaluation of the unconfined uniaxial compression test to study the evolution of apparent printable mortar properties during the early age transition regime10.1016/j.cemconres.2022.106956 ↗
30. Comparison between methods for indirect assessment of buildability in fresh 3D printed mortar and concrete10.1016/j.cemconres.2022.106764 ↗
31. Alkali-activated fly ashes10.1016/S0008-8846(98)00243-9 ↗
32. Calorimetric study of alkaline activation of calcium hydroxide–metakaolin solid mixtures10.1016/S0008-8846(00)00435-X ↗
33. Alkali activated fly ash binders, a comparative study between sodium and potassium10.3989/mc.2006.v56.i281.92 ↗
34. Composition and microstructure of alkali activated fly ash binder: effect of the activator10.1016/j.cemconres.2005.03.003 ↗
35. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
36. Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing10.1080/17452759.2016.1209867 ↗
37. Printable properties of cementitious material containing copper tailings for extrusion based 3D printing10.1016/j.conbuildmat.2017.12.051 ↗
38. Durability of alkali-activated materials: progress and perspectives10.1111/jace.12831 ↗
39. Structural concrete based on alkali-activated binders: terminology, reaction mechanisms, mix designs and performance10.1002/suco.201700016 ↗
40. 6 - Nanostructure/microstructure of fly ash geopolymers
41. Geopolymer concrete: a review of some recent developments10.1016/j.conbuildmat.2015.03.036 ↗
42. Microstructure development of alkali-activated fly ash cement: a descriptive model10.1016/j.cemconres.2004.08.021 ↗
43. Influence of water to binder ratio on the rheology and structural build-up of alkali-activated slag/fly ash mixtures10.1016/j.conbuildmat.2020.120253 ↗
44. Evolution of binder structure in sodium silicate-activated slag-metakaolin blends10.1016/j.cemconcomp.2010.09.004 ↗
45. Characterization of alkali activated slag–fly ash blends containing nano-silica10.1016/j.conbuildmat.2015.08.086 ↗
46. Microscopy and microanalysis of inorganic polymer cements. 2: the gel binder10.1007/s10853-008-3078-z ↗
47. Role of slag in microstructural development and hardening of fly ash-slag geopolymer10.1016/j.cemconres.2012.10.004 ↗
48. Digital concrete: opportunities and challenges10.21809/rilemtechlett.2016.16 ↗
49. Rehman · 2021 · 14
50. Review of emerging additive manufacturing technologies in 3D printing of cementitious materials in the construction industry10.3389/fbuil.2018.00085 ↗
51. Structural built-up of cement-based materials used for 3D-printing extrusion techniques10.1617/s11527-015-0571-0 ↗
52. V.N. Nerella, Development and characterisation of cement-based materials for extrusion-based 3D-printing. Doctoral thesis, ISBN: 978-3-86780-618-3.
53. A feasible method for measuring the buildability of fresh 3D printing mortar10.1016/j.conbuildmat.2019.07.326 ↗
54. Evolution of strength and failure of SCC during early hydration10.1016/j.cemconres.2016.09.004 ↗
55. 3D printing using concrete extrusion: a roadmap for research10.1016/j.cemconres.2018.05.006 ↗
56. 3D printing trends in building and construction industry: a review10.1080/17452759.2017.1326724 ↗
57. 3D printing of buildings and building components as the future of sustainable construction?10.1016/j.proeng.2016.07.357 ↗
58. Juxtaposing fresh material characterisation methods for buildability assesment of 3D printable cementitious mortras10.1016/j.cemconcomp.2021.104024 ↗
59. The “Slugs-test” for extrusion-based additive manufacturing: protocol, analysis and practical limits10.1016/j.cemconcomp.2021.104074 ↗
60. Measurement of tensile bond strength of 3D printed geopolymer mortar10.1016/j.measurement.2017.08.051 ↗
61. Green and early age compressive strength of extruded cement mortar monitored with compression tests and ultrasonic techniques10.1016/j.cemconres.2005.09.005 ↗
62. Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement10.1016/j.conbuildmat.2018.05.010 ↗
63. Rheological requirements for printable concretes10.1016/j.cemconres.2018.04.005 ↗
64. Setting on demand for digital concrete – Principles, measurements, chemistry, validation10.1016/j.cemconres.2020.106047 ↗
65. Assessing the fresh properties of printable cement-based materials: high potential tests for quality control
66. Proposed structure for calcium silicate hydrate gel10.1111/j.1151-2916.1986.tb07446.x ↗
67. Yield stress criteria to assess the buildability of 3D concrete printing10.1016/j.conbuildmat.2019.117989 ↗
68. Shape stability of 3D printable concrete with river and manufactured sand characterized by squeeze flow10.1016/j.cemconcomp.2022.104674 ↗
69. Multi scale experimental study of concrete rheology: from water scale to gravel scale10.1617/s11527-005-9047-y ↗
70. Towards full automation in 3D concrete printing construction: development of an automated and inline sensor-printer integrated instrument for in-situ assessment of structural build-up and quality of concrete
71. Rheological parameters, thixotropy and creep of 3D-printed calcium sulfoaluminate cement composites modified by bentonite10.1016/j.compositesb.2020.107821 ↗
72. In-line activation of geopolymer slurry for concrete 3D printing10.1016/j.cemconres.2022.107008 ↗
73. Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up10.1016/j.conbuildmat.2020.119090 ↗
74. The effect of material fresh properties and process parameters on buildability and interlayer adhesion of 3D printed concrete10.3390/ma12132149 ↗
75. Comparison of rheology measurement techniques used in 3D concrete printing applications10.1007/978-981-15-7222-7_23 ↗
76. Buswell · 2022
77. Study on criticality of coarse aggregate content on early-age properties of 3D printable concrete10.1016/j.matlet.2024.136448 ↗
78. Design and analyses of printable strain hardening cementitious composites with optimized particle size distribution10.1016/j.conbuildmat.2022.126411 ↗
79. Understanding and modeling the plastic deformation of 3D printed concrete based on viscoelastic creep behavior
80. Fresh and hardened properties of extrusion-based 3d-printed cementitious materials: a review10.3390/su12145628 ↗
81. EN 196-3:2017-03: Methods of testing cement - Part 3: Determination of setting times and soundness, Beuth Verlag GmbH, Berlin.
82. Rheological properties of cement pastes: a discussion of structure formation and mechanical property development10.1016/j.cemconres.2008.06.008 ↗
83. A new look at the measurement of cementitious paste setting by Vicat test10.1016/j.cemconres.2009.12.001 ↗
84. Digital fabrication of ‘just-add-water’ geopolymers: effects of curing condition and print-time interval
85. U. Pott, Rheo-mechanical test methods: Development, validation and application for a tailored control of material properties in 3D concrete printing. Doctoral Dissertation, Berlin, 2024.
86. Structural build-up for digital fabrication with concrete
87. ACDC: the admixture controlled digital casting and its application to thin folded concrete structures
88. Yield stress during setting of cement pastes from penetration tests10.1016/j.cemconres.2009.01.012 ↗
89. Experimentelle Bestimmung Binghamscher Stoffparameter10.1007/BF01332383 ↗
90. Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars10.1016/j.conbuildmat.2017.09.109 ↗
91. American Society for Testing and Material, ASTM D2166-06: Standard Test Method for Unconfined Compressive Strength of Cohesive Soil, 2010, 〈https://www.astm.org/d2166-06.html〉.
92. EN 196-1:2016-11: Methods of testing cement - Part 1: Determination of strength, Beuth Verlag GmbH, Berlin.
93. A feasible method for measuring the buildability of fresh 3D printing mortar10.1016/j.conbuildmat.2019.07.326 ↗
94. Juxtaposing fresh material characterisation methods for buildability assessment of 3D printable cementitious mortars10.1016/j.cemconcomp.2021.104024 ↗
95. EN 196-6:2019-03: Methods of testing cement - Part 6: Determination of fineness, Beuth Verlag GmbH, Berlin.
96. EN 725-5:2007-04: Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution, Beuth Verlag GmbH, Berlin.
97. Comparison of ultrasonic wave transmission and reflection measurements with P- and S-waves on early age mortar and concrete10.1007/BF02479285 ↗
98. G. Ye, Experimental Study and Numerical Simulation of the Development of the Microstructure and Permeability of Cementitious Materials, Delft, 2003.10.1016/S0008-8846(02)00891-8 ↗
99. Setting of cement with controlled superplasticizer addition monitored by ultrasonic measurements and calorimetry10.1016/j.cemconcomp.2015.11.004 ↗
100. Operational issues in isothermal calorimetry10.1016/j.cemconres.2010.03.017 ↗