journal article·2024-12Open access

Study on sewage erosion resistance of nano titanium modified coral concrete

Tian-ying Tan, Ao Zhang

Abstract

Sewage environments can significantly erode and degrade coral concrete, impacting its structural longevity. Moreover, the curing water environment greatly influences coral concrete's resistance to sewage erosion. This study investigated the modification of coral concrete with nano TiO 2 to enhance its sewage erosion resistance. Concrete specimens with four different mass fractions of nano TiO 2 were prepared and cured in three environments. Tests for compressive strength, flexural strength, and mass loss were conducted before and after 180 days of sewage exposure, and a corrosion coefficient was defined to evaluate resistance to sewage corrosion. While nano TiO 2 significantly improved the mechanical properties and sewage erosion resistance of coral concrete, oxalic acid and seawater environments had adverse effects. Furthermore, increasing the nano TiO 2 mass fraction initially enhanced and then reduced strength and resistance, while mass loss rates first decreased and then increased. The optimal nano TiO 2 dosage of 4% resulted in a maximum increase of 22.2% in compressive strength, 33.2% in flexural strength, a 0.06 increase in the compressive corrosion resistance coefficient, and a 0.1 increase in the flexural corrosion resistance coefficient. At this dosage, compressive strengths of coral concrete cured in oxalic acid and seawater were 97.8% and 93.9% of those in freshwater, while flexural strengths were 97.8% and 94.4%, respectively, with slight decreases in corrosion resistance coefficients, accompanied by higher mass loss rates. X-ray diffraction (XRD) and scanning electron microscopy (SEM) revealed that nano TiO 2 promotes cement hydration, forming a dense structure by filling matrix pores. However, oxalic acid reacts with Ca(OH) 2 to form calcium oxalate, slowing cement hydration, while MgCl 2 in seawater reacts with Ca(OH) 2 , forming expansive Mg(OH) 2 , which increases internal concrete pores.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete Corrosion and Durability · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. The comparison of coral concrete and other light weight aggregate concrete on mechanics performance10.4028/www.scientific.net/AMR.446-449.3369 ↗
2. Howdyshell · 1974
3. Experience with use of coral detritus as concrete aggregate in Western Samoa
4. Mesoscopic characteristics and macroscopic mechanical properties of coral aggregates10.1016/j.conbuildmat.2021.125125 ↗
5. Literature review of coral concrete10.1007/s13369-017-2705-x ↗
6. Constitutive relations of coral aggregate concrete under uniaxial and triaxial compression10.1016/j.conbuildmat.2020.118957 ↗
7. Diffusion behavior of chloride in coral aggregate concrete in marine salt-spray environment10.1016/j.conbuildmat.2021.125878 ↗
8. Utilizing of coral/sea sand as aggregates in environment-friendly marine mortar: Physical properties, carbonation resistance and microstructure
9. Durability of coral aggregate concrete under coupling action of sulfate, chloride and drying-wetting cycles
10. Deterioration mechanism of coral reef sand concrete under scouring and abrasion environment and its performance modulation10.1016/j.conbuildmat.2023.133607 ↗
11. A gentle acid-wash and pre-coating treatment of coral aggregate to manufacture high-strength geopolymer concrete10.1016/j.conbuildmat.2020.121780 ↗
12. Properties of concrete prepared with silane coupling agent-impregnated coral aggregate and coral concrete10.3390/ma14216454 ↗
13. A state-of-the-art review on the durability of seawater coral aggregate concrete exposed to marine environment
14. Durability and microstructure of coral sand concrete incorporating supplementary cementitious materials10.1016/j.conbuildmat.2018.03.082 ↗
15. The effect of fly ash and silica fume on mechanical properties and durability of coral aggregate concrete10.1016/j.conbuildmat.2018.06.097 ↗
16. Cementitious mortars containing pozzolana under elevated temperatures10.1002/suco.202100567 ↗
17. Compressive strength ratios of concretes containing pozzolans under elevated temperatures10.1016/j.heliyon.2024.e26932 ↗
18. Effect of pozzolanic materials on mechanical properties and water absorption of autoclaved aerated concrete
19. Progresses of high-performance coral aggregate concrete (HPCAC): A review10.1016/j.cemconcomp.2023.105059 ↗
20. Effect of fiber reinforcement on bond behavior between coral aggregate concrete and GFRP bar
21. Study on flexural behavior of carbon fibers reinforced coral concrete using digital image correlation10.1016/j.conbuildmat.2019.117968 ↗
22. Study on the corrosion resistance of composite modified anti-corrosion mortar under the action of bio-organic water10.3389/feart.2023.1106872 ↗
23. Microbiologically induced corrosion of concrete in sewer structures: A review of the mechanisms and phenomena10.1016/j.conbuildmat.2019.117813 ↗
24. Mechanical and durable properties of chopped basalt fiber reinforced recycled aggregate concrete and the mathematical modeling10.1016/j.conbuildmat.2021.123901 ↗
25. Use of calcium aluminate cement in H2S biogenic environment
26. Nano-core effect in nano-engineered cementitious composites10.1016/j.compositesa.2017.01.008 ↗
27. Concrete corrosion in a wastewater treatment plant – a comprehensive case study10.1016/j.conbuildmat.2021.124388 ↗
28. Nano-core effect in nano-engineered cementitious composites10.1016/j.compositesa.2017.01.008 ↗
29. Influence of nano-materials in high strength concrete,J
30. Effects of nano-TiO 2 on the toughness and durability of cement-based material
31. Effect of water environment on mechanical behavior of coral aggregate concrete
32. Properties of concrete mixes containing tire rubber and brick powder exposed to sulfuric acid and cured in water: A comparative study10.1016/j.heliyon.2023.e17514 ↗
33. An experimental study on the performance of fine-grained concrete incorporating recycled steel spring exposed to acidic conditions10.1177/1369433220915794 ↗
34. An experimental investigation into the mechanical performance and microstructure of cementitious mortars containing recycled waste materials subjected to various environments
35. T/CECS 694-2020 · 2020
36. GB/T 50081-2019 · 2019
37. Influences of nano TiO2 on the properties of cement-based materials: Hydration and drying shrinkage10.1016/j.conbuildmat.2015.02.003 ↗
38. Hydration and properties of nano TiO2 blended cement composites10.1016/j.cemconcomp.2012.02.009 ↗
39. Effects of Nano TiO2 on the Toughness and Durability of Cement-Based Material10.1155/2015/583106 ↗
40. Fresh and hardened properties of seawater-mixed concrete10.1016/j.conbuildmat.2018.09.126 ↗
41. Utilization of seawater and sea sand in concrete for the sustainability of natural resources
42. Nano TiO2-engineered anti-corrosion concrete for sewage system10.1016/j.jclepro.2022.130508 ↗
43. Portland Cement Paste Modified by TiO2 Nanoparticles: A Microstructure Perspective10.1021/ie4011595 ↗
44. The effect of TiO2 nanoparticles on water permeability and thermal and mechanical properties of high strength self-compacting concrete10.1016/j.msea.2010.09.074 ↗
45. Effect of nano-titanium dioxide on mechanical and electrical properties and microstructure of reactive powder concrete10.1088/2053-1591/aa87db ↗
46. Novel insights on the setting process, hardened properties, and durability of sustainable ultra-high-performance seawater sea sand concrete10.1016/j.conbuildmat.2024.138092 ↗
47. Quantitative effect of seawater on the hydration kinetics and microstructure development of Ultra High Performance Concrete (UHPC)10.1016/j.conbuildmat.2022.127733 ↗
48. Some considerations for applicability of seawater as mixing water in concrete10.1061/(ASCE)MT.1943-5533.0001006 ↗
49. Mazer, W., Weber, A.M., Brunhara, C.A., & Fonseca, J.M. Salt Attack, Durability and Service Life of Concrete Structures. In J. M. P. Q. Delgado (Ed.), Building Pathology, Durability and Service Life (pp. 57-72). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-030-47302-0.10.1007/978-3-030-47302-0_3 ↗
50. Al-Haddad, D.B., Jokhio, G.A., & Tair, A.A. Overview of Concrete Deterioration Due to Sulphate Attack and Comparison of Its Requirements in International Codes. In K. Al Marri, F. Mir, S. David, & A. Aljuboori (Eds.), BUiD Doctoral Research Conference 2022: Multidisciplinary Studies (pp. 199-210). Cham: Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-16918-5.10.1007/978-3-031-27462-6_19 ↗
51. Implementing ANN to minimize sewage systems concrete corrosion with glass beads substitution10.1016/j.conbuildmat.2017.02.034 ↗
52. Mechanism and performance control methods of sulfate attack on concrete: a review10.3390/ma17194836 ↗
53. et.al. Nano-core effect in nano-engineered cementitious composites.10.1016/j.compositesa.2017.01.008 ↗
54. Effect investigation of nanofillers on C-S-H gel structure with Si NMR10.1061/(ASCE)MT.1943-5533.0002559 ↗