Preparation and properties of nickel-iron slag-based magnesium chloride cement
Source abstract
Abstract
Electric furnace nickel-iron slag is characterized by high magnesium, in this paper, HCl was used as leaching solution to recover magnesium in nickel-iron slag to prepare MgCl2·6 H2O for molding magnesium oxychloride cement (MOC). The orthogonal experimental method was used to obtain the optimal leaching system of Mg2+ in nickel-iron slag and the optimal mix ratio of nickel-iron slag-based magnesium oxychloride cement (PMOC). PMOC and analytically pure magnesium chloride hexahydrate-based magnesium oxychloride cement (RMOC) were molded under this ratio. It was found that the 28d strength of PMOC prepared with the same ratio was higher than the 28d strength of RMOC and more stable, and the water resistance of PMOC was also improved. The hydration products of both specimens were characterized by x-ray diffraction (XRD), thermogravimetric (TG), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The hydration products of MOC were found to be 5-phase and Mg(OH)2, and it was found that the higher strength of PMOC in the same ratio was due to the higher content of 5-phase in PMOC than that of RMOC, and the lower content of Mg(OH)2 than that of RMOC. It was found that the content of Mg(OH)2 was lower than that of RMOC in PMOC after 7 d of soaking, which was the reason why the strength and water resistance of PMOC were slightly better than that of RMOC after soaking.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production · Layered Double Hydroxides Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Magnesium oxychloride cement-based strain-hardening cementitious composite: mechanical property and water resistance10.1016/j.conbuildmat.2020.119970 ↗
2. Recent development in magnesium oxychloride cement10.1002/suco.201800077 ↗
3. Influence of molar ratios on properties of magnesium oxychloride cement10.1016/j.cemconres.2007.03.015 ↗
4. The role of phosphoric acid in improving the strength of magnesium oxychloride cement pastes with large molar ratios of H2O/MgCl210.1016/j.cemconcomp.2019.01.013 ↗
5. Recent progress of magnesium oxychloride cement: manufacture, curing, structure and performance10.1016/j.conbuildmat.2020.119381 ↗
6. The mechanism of supplementary cementitious materials enhancing the water resistance of magnesium oxychloride cement (MOC): a comparison between pulverized fuel ash and incinerated sewage sludge ash10.1016/j.cemconcomp.2020.103562 ↗
7. Superhydrophobic behavior of magnesium oxychloride cement surface with a dual-level fractal structure10.1016/j.conbuildmat.2019.03.158 ↗
8. Effect of 5-phase seed crystal on the mechanical properties and microstructure of magnesium oxychloride cement10.1016/j.conbuildmat.2017.05.211 ↗
9. Bioinspired and biomineralized magnesium oxychloride cement with enhanced compressive strength and water resistance10.1016/j.jhazmat.2019.121099 ↗
10. Effect of tartaric acid and phosphoric acid on the water resistance of magnesium oxychloride (MOC) cement10.1016/j.conbuildmat.2019.04.086 ↗
11. The water resistance and mechanism of FeSO4 enhancing bamboo scraps/ magnesium oxychloride cement composite10.1016/j.conbuildmat.2021.125942 ↗
12. Case study on nanoscale modification of MOC-based construction composites: Introduction of molybdenum disulfide
13. Towards novel building materials: High-strength nanocomposites based on graphene, graphite oxide and magnesium oxychloride
14. MOC composites for construction: improvement in water resistance by addition of nanodopants and polyphenol10.3390/polym15214300 ↗
15. 2016. Melting behaviour of ferronickel slags10.1007/s11837-016-2140-6 ↗
16. Synthesis of ferronickel slag-based geopolymers10.1016/j.mineng.2008.07.003 ↗
17. A new composite material – low-carbon Stellite alloy reinforced with nickel-coated carbon fibers10.1177/0021998312469991 ↗
18. Value added utilization of by-product electric furnace ferronickel slag as construction materials: a review10.1016/j.resconrec.2018.02.034 ↗
19. Preparation of refractory materials from electric furnace ferronickel slag and blast furnace ferronickel slag: a comparison10.1016/j.jece.2022.107929 ↗
20. Expansion due to alkali-silica reaction of ferronickel slag fine aggregate in OPC and blended cement mortars10.1016/j.conbuildmat.2016.06.144 ↗
21. Preparation of enstatite-spinel based glass-ceramics by co-utilization of ferronickel slag and coal fly ash10.1016/j.ceramint.2021.07.108 ↗
22. Evaluation of alkali-activated blast furnace ferronickel slag as a cementitious material: reaction mechanism, engineering properties and leaching behaviors10.1016/j.conbuildmat.2018.08.182 ↗
23. Constraints and opportunities for the recycling of growing ferronickel slag in China Resour10.1016/j.resconrec.2018.08.002 ↗
24. The influence of steel slag and ferronickel slag on the properties of alkali-activated slag mortar10.1016/j.conbuildmat.2019.07.340 ↗
25. Sulfate resistance of steam cured ferronickel slag blended cement mortar10.1016/j.cemconcomp.2018.12.001 ↗
26. Magnesium phosphate cement prepared with electric furnace ferronickel slag: Properties and its hydration mechanism
27. Cements of yesterday and today: concrete of tomorrow10.1016/S0008-8846(00)00365-3 ↗
28. Alkali–silica reactivity of cementitious materials using ferro-nickel slag fine aggregates produced in different cooling conditions10.1016/j.conbuildmat.2015.09.039 ↗
29. Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag10.1016/j.conbuildmat.2017.02.023 ↗
30. Understanding the improvement of Mg-rich electrical ferronickel slag on magnesium potassium phosphate cement's performance
31. Experimental study on the strength of soil-cement with additions of mineral powder and ferronickel slag powder10.1504/IJMME.2020.109632 ↗
32. Hydration and compressive strength of supersulfated cement with low-activity high alumina ferronickel slag10.1016/j.cemconcomp.2022.104892 ↗
33. Microscopy and microanalysis of inorganic polymer cements. 2: the gel binder10.1007/s10853-008-3078-z ↗
34. Influence of nickel slag powders on properties of magnesium potassium phosphate cement paste10.1016/j.conbuildmat.2019.02.014 ↗
35. From ferronickel slag to value-added refractory materials: a microwave sintering strategy
36. Performance of fly ash concrete with ferronickel slag fine aggregate against alkali-silica reaction and chloride diffusion
37. Characteristics and reactivity of ferronickel slag powder10.1016/j.conbuildmat.2017.09.038 ↗
38. Recovery of magnesium from ferronickel slag to prepare hydrated magnesium sulfate by hydrometallurgy method10.1016/j.jclepro.2021.127049 ↗
39. Fabrication of Mg(OH)2 from ferro-nickel slag
40. Li · 2022
41. Magnesium extraction from magnetic separation tailings of laterite ore by sulfuric acid leaching and ammonium carbonate precipitation10.1007/s40831-022-00496-x ↗
42. Huang Q. Study on salt brine corrosion resistance of magnesium chloride cement. Xining: University of Chinese Academy of Sciences (Qinghai Salt Lake Research Institute, Chinese Academy of Sciences), 2020.
43. Effect of hydroxyacetic acid on the water resistance of magnesium oxychloride cement
44. GB/T 50081-2002.Standard of test methods for mechanical properties of ordinary concrete.