Design and characterization of solid waste based self-healing artificial aggregate
Source abstract
Abstract
A novel type of solid waste based artificial aggregate which holds promise for a good synergy between mechanical properties and self-healing capacity is designed with using the core-shell structure concept. The artificial aggregate is designed with a high self-healing potential core and a high strength shell, to achieve the high-performance application of artificial aggregates in concrete. The basic properties and potential self-healing capacity of artificial aggregates were comprehensively analyzed. The results indicated that the artificial aggregates were eligible considering the 28-d single particle compressive strength of exceeding 5.0 MPa, low water absorption and high volumetric stability. The crack-healing ratio of artificial aggregate is up to 94.5 % after 7-d curing in the simulated concrete pore solution (i.e., saturated Ca(OH)2 solution). The primary self-healing product was detected as calcium-aluminate-silicate-hydrate (C-A-S-H) gel due to the secondary hydration reactions of core materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Microbial Applications in Construction Materials · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Fly ash-based artificial aggregates synthesized through alkali-activated cold-bonded palletization technology10.1016/j.conbuildmat.2022.128268 ↗
2. Artificial alkali-activated aggregates developed from wastes and by-products: a state-of-the-art review10.1016/j.resconrec.2021.105971 ↗
3. Impact of replacement of natural river sand with geopolymer fly ash sand on hardened properties of concrete10.1016/j.conbuildmat.2019.03.134 ↗
4. A review of recycled aggregate in concrete applications (2000-2017)10.1016/j.conbuildmat.2018.03.240 ↗
5. Geomaterials as construction aggregates: a state-of-the-art10.1007/s10064-021-02488-9 ↗
6. Characteristic study of geopolymer fly ash sand as a replacement to natural river sand10.1016/j.conbuildmat.2017.06.029 ↗
7. Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature10.4028/www.scientific.net/KEM.594-595.151 ↗
8. Potential use of lightweight aggregate (LWA) produced from bottom coal ash for internal curing of concrete systems10.1016/j.cemconcomp.2019.103428 ↗
9. Stabilization/solidification of sand-washing slurry used for porous cold-bonded ceramsite10.1016/j.cemconcomp.2022.104771 ↗
10. The production and properties of cold-bonded aggregate and its applications in concrete: a review10.1016/j.conbuildmat.2019.07.219 ↗
11. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
12. A review: The comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements10.1016/j.cemconres.2010.03.020 ↗
13. Potential of geopolymer technology towards green buildings and sustainable cities10.1016/j.proeng.2011.11.2108 ↗
14. Inorganic polymerie new materials10.1007/BF01912193 ↗
15. Role of slag in microstructural development and hardening of fly ash-slag geopolymer10.1016/j.cemconres.2012.10.004 ↗
16. Pacheco-Torgal · 2014
17. High-strength high-ductility engineered/strain-hardening cementitious composites (ECC/SHCC) incorporating geopolymer fine aggregates10.1016/j.cemconcomp.2021.104296 ↗
18. Self-healing of early-age cracks in cement mortars with artificial functional aggregates10.1016/j.conbuildmat.2020.121846 ↗
19. Pretreated lightweight aggregates for self-healing concrete exposed to calcium hydroxide-rich sewage10.1016/j.conbuildmat.2022.130117 ↗
20. Optimized Self-Healing in concrete using engineered aggregates10.1016/j.conbuildmat.2021.124965 ↗
21. Autogenous and engineered healing mechanisms of carbonated steel slag aggregate in concrete10.1016/j.conbuildmat.2015.12.191 ↗
22. Artificial aggregates for self-healing of cement paste and chemical binding of aggressive ions from sea water10.1016/j.compositesb.2019.107605 ↗
23. Artificial aggregates could be a potential way to realize microbial self-healing concrete: an example based on modified ceramsite
24. Activation of fly ash and its effects on cement properties10.1016/S0008-8846(98)00178-1 ↗
25. Alkali-activated fly ash/slag cements: strength behaviour and hydration products10.1016/S0008-8846(00)00298-2 ↗
26. Multiscale micromechanical analysis of alkali-activated fly ash-slag paste10.1016/j.cemconres.2020.106141 ↗
27. Development of engineered self-healing and self-repairing concrete-state-of-the-art report10.3151/jact.10.170 ↗
28. Effect of blast furnace slag on self-healing of microcracks in cementitious materials10.1016/j.cemconres.2014.03.010 ↗
29. A review: self-healing in cementitious materials and engineered cementitious composite as a self-healing material10.1016/j.conbuildmat.2011.08.086 ↗
30. A review of self-healing concrete for damage management of structures10.1002/admi.201800074 ↗
31. Chinese standard · Quant. Determ. Const. Cem.: GB/T 12960 · 2019
32. C09 Committee, Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method): ASTM C 1260-22, (2022).
33. Self-healing cement concrete composites for resilient infrastructures: a review10.1016/j.compositesb.2020.107892 ↗
34. Fang · 2016
35. Visual and quantitative evaluation of mechanical healing efficiency of self-healing cementitious materials through volumetric strain analysis10.1016/j.cemconcomp.2023.105301 ↗
36. Visual and quantitative evaluation of crack bonding rate of self-healing mortars based on volumetric strain analysis10.1016/j.jclepro.2024.141928 ↗
37. Visualized evaluation of mechanical bonding properties of cementitious material interfaces based on volumetric strain analysis10.1016/j.cemconcomp.2022.104543 ↗
38. Full-field characterisation of oxide-oxide ceramic-matrix composites using X-ray computed micro-tomography and digital volume correlation under load at high temperatures10.1016/j.matdes.2021.109899 ↗
39. Interior fracture analysis of rubber-cement composites based on X-ray computed tomography and digital volume correlation10.1016/j.conbuildmat.2020.119833 ↗
40. Positive roles of lime mud in blended Portland cement10.1016/j.conbuildmat.2022.127067 ↗
41. A review: reaction mechanism and strength of slag and fly ash-based alkali-activated materials10.1016/j.conbuildmat.2022.126843 ↗
42. Behaviour of alkali-activated concrete at elevated temperatures: a critical review10.1016/j.cemconcomp.2023.104961 ↗
43. Sodium silicate-based, alkali-activated slag mortars: Part I. Strength, hydration and microstructure10.1016/S0008-8846(02)00717-2 ↗
44. Effect of carbonation on alkali-activated slag paste10.1111/j.1551-2916.2006.01214.x ↗
45. Structure of Calcium Silicate Hydrates Formed in Alkaline-Activated Slag: Influence of the Type of Alkaline Activator10.1111/j.1151-2916.2003.tb03481.x ↗
46. Blast furnace slag-Mg(OH)2 cements activated by sodium carbonate10.1039/C8RA03717E ↗
47. Chloride binding and mobility in sodium carbonate-activated slag pastes and mortars10.1617/s11527-017-1121-8 ↗
48. Controlling the reaction kinetics of sodium carbonate-activated slag cements using calcined layered double hydroxides10.1016/j.cemconres.2015.11.012 ↗
49. In-situ X-ray tomographic imaging of microstructure evolution of fly ash and slag particles in alkali-activated fly ash-slag paste10.1016/j.compositesb.2021.109221 ↗
50. Preparation and characterization of coal gangue geopolymers10.1016/j.conbuildmat.2018.07.220 ↗
51. The bond between geopolymer repair mortars and OPC concrete substrate: strength and microscopic interactions10.1016/j.cemconcomp.2021.103991 ↗
52. Assessment of morphological characteristics and physico-mechanical properties of geopolymer green foam lightweight aggregate formulated by microwave irradiation
53. Alkali-activated artificial aggregates fabricated by red mud and fly ash: performance and microstructure10.1016/j.conbuildmat.2021.122552 ↗
54. Development and incorporation of lightweight waste-based geopolymer aggregates in mortar and concrete10.1016/j.conbuildmat.2016.11.017 ↗
55. The effect of NaOH concentration on the mechanical and physical properties of alkali activated fly ash-based artificial lightweight aggregate10.1016/j.conbuildmat.2020.119832 ↗
56. Studies of alkali-silica reaction. part 5. Verification of a newly proposed reaction mechanism10.1016/0008-8846(89)90081-1 ↗
57. Chemistry of alkali-silica reaction and testing of aggregates10.1016/j.cemconcomp.2005.03.005 ↗
58. Geopolymer synthesis using silica fume and sodium aluminate10.1007/s10853-006-0376-1 ↗
59. The evolution of interfacial transition zone in alkali-activated fly ash-slag concrete10.1016/j.cemconres.2019.105963 ↗
60. Automated identification of the aggregate-paste interfacial transition zone in mortars of silica sand with Portland or alkali-activated slag cement paste10.1016/S0008-8846(00)00254-4 ↗
61. Distinctive microstructural features of aged sodium silicate-activated slag concretes10.1016/j.cemconres.2014.07.008 ↗
62. Activation of pozzolanic and latent-hydraulic reactions by alkalis in order to repair concrete cracks10.1061/(ASCE)MT.1943-5533.0001162 ↗
63. Flow properties of freshly prepared ettringite suspensions in water at 25 °C10.1016/j.jcis.2005.07.052 ↗
64. De Rooij · 2013
65. Repeated autogenous healing in strain-hardening cementitious composites by using superabsorbent polymers10.1061/(ASCE)MT.1943-5533.0001360 ↗
66. Water permeability and autogenous healing of cracks in concrete