journal article·2024-07Open access

Phase formation and carbonation impact on the strength of alkali-activated demolition waste with calcium compounds

Isabelle Wichmann, Dietmar Stephan

Abstract

The present study evaluates the impact of calcium compounds on the reaction kinetics of alkali-activated construction demolition waste. Two materials, concrete and brick demolition waste, were milled to powders and supplemented with either carbonated cement stone or freshly ground cement stone. The mixed solids were further subjected to alkaline activation using a sodium silicate solution. X-ray diffraction, isothermal conduction calorimetry, thermogravimetric analysis, scanning electron microscopy and compressive strength tests were employed to understand the interaction of the reactants. The results indicate that cubes prepared from freshly ground cement stone exhibited higher compressive strength of around 18 MPa than those from carbonated cement stone with a maximum of 7 MPa. This superior strength was approved by subsequent analysis methods. A more significant reaction was observed in the material containing freshly ground cement stone, resulting in increased strength within the system. The presence of portlandite in freshly ground cement stone facilitated the initial formation of calcium silicate hydrate phases.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Provis · 2009
2. Geopolymers and other alkali activated materials: why, how, and what?10.1617/s11527-013-0211-5 ↗
3. Alkali-activated materials10.1016/j.cemconres.2017.02.009 ↗
4. Life cycle assessment of alkali-activated materials: a systematic literature review10.1007/s44242-023-00014-6 ↗
5. Reaction of calcium carbonate minerals in sodium silicate solution and its role in alkali-activated systems10.1016/j.mineng.2021.106849 ↗
6. Structural concrete based on alkali-activated binders: terminology, reaction mechanisms, mix designs and performance10.1002/suco.201700016 ↗
7. Provis · 2013
8. Natural pozzolan based geopolymers: a review on mechanical, microstructural and durability characteristics10.1016/j.conbuildmat.2018.09.191 ↗
9. Alkali-activation of recycled construction and demolition waste aggregate with no added binder10.1016/j.conbuildmat.2019.02.031 ↗
10. Alkali-activated building materials made with recycled construction and demolition wastes10.1016/j.conbuildmat.2017.05.122 ↗
11. Reusing construction and demolition waste to prepare alkali-activated cement10.3390/ma15103437 ↗
12. Development of building material from geopolymerization of construction and demolition waste (CDW)10.1080/0371750X.2014.922429 ↗
13. Plate loading tests on clay with construction and demolition materials10.1007/s13369-020-04916-6 ↗
14. The role of construction and demolition materials in swelling of a clay
15. Reclaimed asphalt pavement and recycled concrete aggregate blends in pavement subbases: laboratory and field evaluation10.1061/(ASCE)MT.1943-5533.0000850 ↗
16. Geotechnical and geoenvironmental properties of recycled construction and demolition materials in pavement subbase applications10.1061/(ASCE)MT.1943-5533.0000652 ↗
17. DIN 4226-100, Aggregates for Concrete and Mortar – Part 100: Recycled Aggregates, Deutsches Institut für Normung, Berlin, 2002.
18. Alkali-activated artificial aggregates fabricated by red mud and fly ash: performance and microstructure10.1016/j.conbuildmat.2021.122552 ↗
19. Artificial alkali-activated aggregates developed from wastes and by-products: a state-of-the-art review
20. Construction and demolition waste (cdw) recycling—as both binder and aggregates—in alkali-activated materials: a novel re-use concept10.3390/su12145775 ↗
21. Upcycling of demolition material from concrete and brick for the production of coldbound, alkali-activated lightweight aggregates10.1617/s11527-023-02216-7 ↗
22. Turning concrete waste powder into carbonated artificial aggregates10.1016/j.conbuildmat.2018.12.021 ↗
23. Properties of lightweight aggregates produced with cold-bonding pelletization of fly ash and ground granulated blast furnace slag10.1617/s11527-012-9855-9 ↗
24. Production and performance of alkali-activated cold-bonded lightweight aggregate in concrete10.1016/j.jobe.2018.09.012 ↗
25. Physico-mechanical performance and durability of artificial lightweight aggregates synthesized by cementing and geopolymerization10.1016/j.conbuildmat.2019.117290 ↗
26. Mechanical and physical properties of concrete made of alkali-activated lightweight aggregates from construction demolition waste
27. Recycling waste rubber tyres in construction materials and associated environmental considerations: a review10.1016/j.resconrec.2020.104679 ↗
28. Potential for CO2 mitigation and economic benefits from accelerated carbonation of construction and demolition waste10.1016/j.rser.2022.112920 ↗
29. Carbonation of concrete with construction and demolition waste based recycled aggregates and cement with recycled content
30. Investigation of mechanical properties and carbonation of concretes with construction and demolition waste and fly ash10.1016/j.conbuildmat.2017.07.143 ↗
31. Slowing down CO2 effective diffusion speeds in recycled aggregate concrete by using carbon capture technology and high-quality recycled aggregate
32. Carbonation degree evaluation of recycled aggregate concrete using carbonation zone widths10.1016/j.jcou.2020.101366 ↗
33. Effect of interfacial transition zone on the carbonation of cement-based materials10.1061/(ASCE)MT.1943-5533.0001860 ↗
34. Improvement of recycled aggregates properties by means of CO2 uptake10.3390/app11146571 ↗
35. Carbon emission analyses of concretes made with recycled materials considering CO2 uptake through carbonation absorption10.1002/suco.201900577 ↗
36. The FastCarb project: taking advantage of the accelerated carbonation of recycled concrete aggregates
37. Potential of CO2 sequestration through construction and demolition (C&D) waste – an overview10.1016/j.jcou.2017.05.014 ↗
38. Carbon dioxide uptake in demolished and crushed concrete10.3151/jact.9.115 ↗
39. Experimental study on CO2 curing for enhancement of recycled aggregate properties10.1016/j.conbuildmat.2013.09.008 ↗
40. Use of a CO2 curing step to improve the properties of concrete prepared with recycled aggregates10.1016/j.cemconcomp.2013.09.008 ↗
41. Assessment of mechanical properties of concrete incorporating carbonated recycled concrete aggregates10.1016/j.cemconcomp.2015.10.018 ↗
42. Performance enhancement of recycled concrete aggregates through carbonation10.1061/(ASCE)MT.1943-5533.0001296 ↗
43. Influence of carbonated recycled concrete aggregate on properties of cement mortar10.1016/j.conbuildmat.2015.08.087 ↗
44. Characterization data of reference materials used for phase II of the priority program DFG SPP 2005 “Opus Fluidum Futurum – rheology of reactive, multiscale, multiphase construction materials”10.1016/j.dib.2023.108902 ↗
45. Investigation of the carbonation front shape on cementitious materials: effects of the chemical kinetics10.1016/j.cemconres.2007.04.002 ↗
46. Concrete carbonation tests in natural and accelerated conditions10.1680/adcr.2003.15.4.171 ↗
47. Advances in understanding cement hydration mechanisms10.1016/j.cemconres.2019.105823 ↗
48. Influence of the carbon dioxide concentration on the resistance to carbonation of concrete10.1016/j.conbuildmat.2013.11.005 ↗
49. Advances in understanding hydration of Portland cement10.1016/j.cemconres.2015.05.025 ↗
50. Microstructural changes induced in Portland cement-based materials due to natural and supercritical carbonation10.1007/s10853-008-2521-5 ↗
51. 2018
52. Effect of silica modulus on the geopolymerization activity of natural pozzolans10.1016/j.conbuildmat.2019.05.161 ↗
53. Effect of type, form, and dosage of activators on strength of alkali-activated natural pozzolans10.1016/j.cemconcomp.2010.10.021 ↗
54. Influence of the chemical and mineralogical composition on the reactivity of volcanic ashes during alkali activation10.1016/j.ceramint.2013.06.072 ↗
55. Quantitative kinetic and structural analysis of geopolymers. Part 2. Thermodynamics of sodium silicate activation of metakaolin10.1016/j.tca.2013.01.040 ↗
56. Calorimetric study of geopolymer binders based on natural pozzolan10.1007/s10973-016-5850-7 ↗
57. Phase assemblance evolution during wet carbonation of recycled concrete fines10.1016/j.cemconres.2022.106733 ↗
58. Földvári · 2011
59. Scrivener · 2016
60. Calibrated quantitative thermogravimetric analysis for the determination of portlandite and calcite content in hydrated cementitious systems10.1617/s11527-017-1046-2 ↗
61. Thermal and carbothermic decomposition of Na2CO3 and Li2CO310.1007/s11663-001-0003-0 ↗
62. Cemdata18: a chemical thermodynamic database for hydrated Portland cements and alkali-activated materials10.1016/j.cemconres.2018.04.018 ↗