journal article·2023-12Open access

Effect of saturation on dynamic characteristics of collapsible gypseous soil using cyclic triaxial testing

Ahmed Salah Abood, Mohammed Y. Fattah, Aqeel Al-Adili

Abstract

Studying the unsaturated gypseous soils behavior may lead to more understanding of the gypseous soil problems associated with unsaturation under the effect of the vertical vibrations. The purpose of this paper is to assess the suitability of unsaturated gypseous soil as a machine foundation soil. Moreover, such a purpose is considered beneficial in assessing appropriate methods for studying the characteristics and the behavior of unsaturated gypseous soils such as soil elastic modulus parameters, compressibility parameter, waves velocities, and amplitude axial strain for cyclic loading parameters under different with degree of saturation. The tests were performed for conditions 35% and 70% relative density of natural gypseous soil under 1.0 Hz and 2.0 Hz cyclic frequency at degrees of saturation (30, 60, and 80%), and fully saturated gypseous soil to investigate the gypseous soil behavior. It was found the values of the elastic modulus and wave velocities at degree of saturation 60% for different number of cycles and frequency increased with decrease of the strain and compressibility. Then, it began to decrease gradually at the saturation degree 80% and 100%, respectively. The best results based on strength consideration were obtained at 60% saturation, and the lowest strength was found when the soil was 100% saturated, for both load frequencies 1, and 2 Hz. The load frequency 1 Hz gave higher values than cyclic frequency 2 Hz of elastic modulus and wave velocities, while the number of cycles was less at the same time and for different degrees of saturation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Geotechnical Engineering and Soil Mechanics · Geotechnical Engineering and Soil Stabilization · Soil, Finite Element Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Relationship between the matric suction and the shear strength in unsaturated soil
2. Geotechnical properties of lime treated gypseous soils10.1016/j.clay.2013.12.015 ↗
3. Expansive soil stabilization with lime, cement, and silica fume10.3390/app13010436 ↗
4. Effect of carbonation on the collapse potential of magnesium oxide treated gypseous soil
5. Effect of gypsum dissolution on the mechanical behavior of gypseous soils
6. Al-Saoudi N.K.S., Al-Shakerchy, M.Sh.M., and Al-Janabi, S.A. (2013). Water infiltration characteristics for suggested artificial lake in bahr al-najaf, Proceedings of 1st International Conference on Geotechnical and Transportation Engineering ICGTE, Baghdad, Iraq.10.30684/etj.31.19A.1 ↗
7. Experimental and numerical study on the effect of liquefaction potential of piles in sandy layered soil under earthquake loading
8. ASTM D 2216–00. Standard test method for laboratory determination of water (Moisture) content of soil and rock by mass, American Society for Testing and Materials.
9. ASTM D 2487–00: Standard practice for classification of soils for engineering purposes (Unified Soil Classification System), American Society for Testing and Materials.
10. ASTM D 422–00. Standard test method for particle size-analysis of soils, American Society for Testing and Materials.
11. ASTM D 4253–00. Standard test method for maximum index density and unit weight of soils using a vibratory table, American Society for Testing and Materials.
12. ASTM D 4254–00. Standard test method for minimum index density and unit weight of soils and calculation of relative density, American Society for Testing and Materials.
13. ASTM D 4318–00, Standard test methods for liquid limit, plastic limit, and plasticity index of soils, American Society for Testing and Materials.
14. ASTM D 854–00. Standard test method for specific gravity of soil solids by pycnometer, American Society for Testing and Materials.
15. STM D-3999 (2011). Standard test methods for the determination of the modulus and damping properties of soils using the cyclic triaxial apparatus, American Society for Testing and Materials.
16. ASTM D-5311 (2013). Standard test method for load controlled cyclic triaxial strength of soil, American Society for Testing and Materials.
17. ASTM D698–00a.Standard test methods for laboratory compaction characteristics of using standard effort (600 kN-m/m3), American Society for Testing and Materials.
18. British Standard Institution, (1990). Method of testing soils for civil engineering purposes, B.S. 1377.
19. Chao · 2014
20. Du, S., and Chian, S.C. (2015). Cyclic Response of liquefiable sand under stress- controlled and strain-controlled triaxial testing, Geotechnical Engineering for Infrastructure and Development - Proceedings of the XVI European Conference on Soil Mechanics and Geotechnical Engineering.
21. Long –term deformation of some gypseous soils10.30684/etj.26.12.3 ↗
22. Fredlund · 1993
23. Liquefaction susceptibility of cohesionless soils under monotonic compression and cyclic simple shear loading at drained/undrained/partially drained modes10.1007/s40515-022-00226-6 ↗
24. Humar · 2001
25. Dynamic characteristics of natural Kutch sandy soils
26. Dynamic behaviour of Kutch soils under cyclic triaxial and cyclic simple shear testing conditions, International Journal of Geotechnical Engineering
27. The setting of gypsum plaster: part I, the hydration of calcium sulphate hemihydrates10.1007/BF01171536 ↗
28. An energetic interpretation of liquefaction laboratory tests on partially saturated soils10.1061/(ASCE)GT.1943-5606.0002881 ↗
29. Improvement of cyclic liquefaction resistance induced by partial saturation: An interpretation using wave-based approaches10.1016/j.soildyn.2023.107819 ↗
30. Engineering characteristics of some gypseous soil in Iraq
31. Ng · 2007
32. Implementation of artificial neural network to predict the permeability and solubility models of gypseous soil10.47836/pjst.29.1.06 ↗
33. Dynamic properties and liqefaction potential of soils
34. Effects of confining pressure and water content on performance of unsaturated compacted clay under repeated loading10.1680/geot.10.P.103 ↗
35. Solis, R., and Zhang, J. (2007). Gypsiferous Soils: An Engineering Problem, 11th Multidisciplinary Conference on Sinkholes and the Engineering and Environmental Impacts of Karst Florida, ASCE, Florida.10.1061/41003(327)72 ↗
36. Solis · 2008 · 809
37. Cyclic resistance of two unsaturated silty sands against soil liquefaction10.1016/j.sandf.2014.11.005 ↗
38. Mechanical properties and stress–dilatancy relationships of unsaturated soil under various cyclic loading conditions
39. Cyclic behaviour and resistance of saturated sand under non-symmetrical loading conditions10.1680/geot.9.P.019 ↗
40. Active balancing and vibration control of rotating machinery: a survey10.1177/058310240103300501 ↗
41. behavior of square footing subjected to gypseous soil under eccentricity-inclined load10.25130/tjes.20.3.10 ↗