Comparison of flexural performance of reinforced concrete beams reinforced with steel plates and corrugated steel plates
Source abstract
Abstract
To explore the mechanical properties of reinforced concrete beams reinforced by steel plates of various shapes, reinforced concrete beams reinforced with steel plates and corrugated steel plates were tested via a two-point loading test. Based on tests, further investigations investigated the deflection of the sample under different loads and the influence of corrugated steel plate properties (thickness, wave height, strength) on the flexural capacity of the reinforced beam, culminating in the development of corresponding numerical models. The findings indicate that the corrugated steel plate has the best reinforcing effect. In contrast to reinforcement utilizing steel plates containing an equivalent quantity of steel material, the corrugated steel plate augments the space within the reinforced beam and the lower shaft region, enhancing the efficiency of the upper compressive steel reinforcement and concrete in bearing loads, bolstering overall load-bearing potential, and exhibiting superior resistance to deformation. To maintain the ductility of the specimen, interface failure must be prevented. Too high wave height will affect the coordination of wave thickness and strength and inhibit the improvement of flexural performance. Therefore, reinforcement design should prioritize wave height determination.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Structural Engineering and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Improving shear capacity of existing RC beams using external bonding of steel plates10.1016/j.engstruct.2004.12.012 ↗
2. Bond tests on concrete elements externally bonded with steel plates and assessment of bond strength models10.1016/j.engstruct.2023.116835 ↗
3. Comparison between strengthening of reinforced concrete beams using steel plates and double FRCM layers
4. Flexural and shear strengthening of RC beams reinforced with externally bonded CFRP laminates postfire exposure by experimental and analytical investigations10.1016/j.engstruct.2024.117995 ↗
5. Shear strengthening of RC arches with FRP composites using EBR and EBROG methods: Experimental and theoretical study10.1016/j.conbuildmat.2024.136212 ↗
6. Shear resistance and calculation method of GFRP-reinforced concrete beams with CFRP mesh fabric as shear reinforcement
7. Experimental and theoretical study on ECC-CFRP jointly flexural reinforcement of pre-damaged reinforced concrete beams10.1016/j.conbuildmat.2024.137720 ↗
8. Carbon fiber-reinforced polymer mesh fabric as shear reinforcement in reinforced concrete beams
9. FLEXURAL BEHAVIOR OF PRESTRESSED CONCRETE BEAMS STRENGTHENED BY NEAR SURFACE MOUNTED FRP RODS
10. Methods for enlarging transportation tunnels while keeping tunnels fully operational
11. Experimental and numerical study on shear performance of externally prestressed precast UHPC segmental beams without stirrups br10.1016/j.istruc.2022.10.092 ↗
12. Experimental and numerical study of hollow core slabs strengthened with mounted steel bars and prestressed steel wire ropes10.1016/j.conbuildmat.2018.08.073 ↗
13. Reinforcing distressed lining structure of highway tunnel with bonded steel plates: case study10.1061/(ASCE)CF.1943-5509.0001363 ↗
14. Experimental research on the mechanical behavior of segmental joints of shield tunnel reinforced with a new stainless steel corrugated plate
15. Shear Behavior of RC beams strengthened with side-bonded BFRP Grids10.1061/(ASCE)CC.1943-5614.0001069 ↗
16. Fracture characterization of concrete/epoxy interface affected by moisture
17. Effects of ultraviolet radiation and associated elevated temperature on mechanical performance of steel/CFRP double strap joints
18. Study on the failure mechanism of cracked lining reinforced by composite arch
19. Excessive long-time deflections of prestressed box girders. i: record-span bridge in palau and other paradigms
20. Long-term investigation of polymer coated corrugated steel pipe. National Corrugated Steel Pipe Association, 11627 SPRINGHOUSE PLACERESTON
21. Ault, J., & Elzly, P.J.W. (2014) Durability of Aluminized Type 2 Coated Corrugated Steel Pipe Exposed 678 Throughout the United States. National Corrugated Steel Pipe Association, 1610 WASHINGTON PLAZA NORTHRESTON, VA 20190. Washington, DC, USA.
22. The metallurgy of zinc-coated steel10.1016/S0079-6425(98)00006-1 ↗
23. Stavros · 1984 · 3
24. Bending stiffnesses of corrugated board
25. Analysis and prediction of mechanical characteristics of corrugated plate as primary support in tunnels10.1016/j.tust.2021.103845 ↗
26. Experimental and numerical research on reinforced concrete slabs strengthened with POZD coated corrugated steel under contact explosive load10.1016/j.ijimpeng.2022.104256 ↗
27. Experimental study on anti-shallow-buried-explosion capacity of a corrugated steel-plain concrete composite structure10.1016/j.ijimpeng.2022.104393 ↗
28. Experimental and numerical study on the blast performance of the corrugated double steel plate concrete composite wallboard under blast loads10.1016/j.tws.2024.111921 ↗
29. Elastic shear buckling of sinusoidally corrugated steel plate shear wall10.1016/j.engstruct.2016.04.047 ↗
30. Elastic buckling and load-resistant behaviors of double-corrugated-plate shear walls under pure in-plane shear loads10.1016/j.tws.2018.06.021 ↗
31. Experimental and numerical study on shear resistant behavior of double-corrugated-plate shear walls10.1016/j.tws.2019.106485 ↗
32. Field evaluation of performance of corroded corrugated steel pipe before and after sliplining rehabilitation10.1016/j.tust.2020.103442 ↗
33. Behavior of Sliplined Corrugated Steel Pipes under Parallel-Plate Loading10.1061/(ASCE)MT.1943-5533.0002889 ↗
34. Experimental and numerical study of corrugated steel-plain concrete composite structures under contact explosions10.1016/j.tws.2024.111624 ↗
35. Experimental and numerical investigation into hysteretic performance of orthogonal double corrugated steel plate shear wall10.1016/j.tws.2023.111392 ↗
36. Experimental and numerical studies on corrugated steel retrofitted damaged reinforced concrete arches10.1016/j.tws.2024.112386 ↗
37. Experimental study on corrugated steel-concrete composite semicircular arches under midspan loading10.1016/j.istruc.2022.02.038 ↗
38. Backfill corrosivity around corrugated steel plate culverts10.1061/(ASCE)CF.1943-5509.0000654 ↗
39. Finite element modeling of FRP-confined concrete using modified concrete damaged plasticity10.1016/j.engstruct.2016.06.047 ↗
40. Finite element simulation of bond-zone behavior of pullout test of reinforcement embedded in concrete using concrete damage-plasticity model 2 (CDPM2)10.1016/j.engstruct.2020.110984 ↗
41. Modeling recommendations for RC and CFST sections in LS-Dyna including bond slip10.1016/j.engstruct.2020.111612 ↗
42. Yu, X. (2006). Study on the axial compression performance of CFRP-concrete-steel composite columns. Harbin University of Technology, Harbin, China (in Chinese).
43. GB/T 50081-2019 (2019) Standard for physical and mechanical test methods of concrete. Ministry of Housing and Urban-Rural Development of the People's Republic of China: Beijing, China.
44. GB 50010-2010 (2010) Code for Design of Concrete Structures. Ministry of Housing and Urban-Rural Development of the People's Republic of China, China Building Industry Press: Beijing, China.
45. GB/T 34567-2017 (2007) Cold-formed corrugated steel pipe. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China: Beijing, China.