journal article·2024-12Open access

Influence of gypsum additions on the hydration and properties of Belite-Ye’elimite-Ternesite clinker

Jiangbo Yu, Qian Zhang, Yu Xu, Jinfeng Sun, Suhua Ma, Weifeng Li

Abstract

Belite-Ye’elimite-Ternesite (BYT) clinker has many advantages compared to Portland cement (PC) clinker, including low sintering temperature and low carbon emission. In this study, we systematically investigated the hydration reaction of BYT clinker in the present of gypsum (CaSO 4 ·2 H 2 O) and compared the properties of BYT clinker with different gypsum additions. The results showed that the gypsum additions of 5 % and 10 % promoted the early exothermic reaction of BYT clinker. In the hydration process of BYT clinker, an inhibitory effect of gypsum was found on the hydration of belite. In addition, the mechanism for the influence of gypsum additions on the hydration behavior of BYT clinker was illustrated that when the content of gypsum was more than 15 %, the production of AFm (C 6 A$H 12 ) and strätlingite (C 2 ASH 8 ) was limited due to the massive formation of AFt (C 6 A$ 3 H 32 ). The addition of gypsum improved pore size distribution and compressive strength. Especially, the 1-day and 56-day compressive strength of BYT clinker increased by 41.6 % and 47.4 %, with gypsum additions of 5 % and 20 %, respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Oxide Properties and Applications · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Cement industry greenhouse gas emissions – management options and abatement cost10.1016/j.jclepro.2015.07.055 ↗
2. B.J. van Ruijven, D.P. van Vuuren, W. Boskaljon, M. Neelis, D. Saygin, M.K. Patel, Corrigendum to “Long-term model-based projections of energy use and CO2 emissions from the global steel and cement industries” [Resour. Conserv. Recycl. 112 (2016) 15–36], Resour. Conserv. Recycl. 125 (2017) 375-380, 10.1016/j.resconrec.2017.06.019..10.1016/j.resconrec.2017.06.019 ↗
3. An overview of environmental sustainability in cement and steel production10.1016/j.jclepro.2019.05.251 ↗
4. Improvement of workability and early strength of calcium sulphoaluminate cement at various temperature by chemical admixtures10.1016/j.conbuildmat.2017.11.076 ↗
5. Hydration evolution and compressive strength of calcium sulphoaluminate cement constantly cured over the temperature range of 0 to 80 °C10.1016/j.cemconres.2017.05.025 ↗
6. CSA raw mix design: effect on clinker formation and reactivity10.1617/s11527-014-0451-z ↗
7. Recent progress and technical challenges in using calcium sulfoaluminate (CSA) cement[J]10.1016/j.cemconcomp.2022.104908 ↗
8. Calcium sulphosilicate in lime-kiln wall coating10.1180/minmag.1972.038.300.09 ↗
9. Ettringite formation in compressed expansive cement pastes10.1016/0008-8846(81)90025-9 ↗
10. Role of sulphates in cement clinkering: the calcium silicosulphate phase10.1016/0008-8846(78)90025-X ↗
11. Hydraulic behavior of calcium sulfoaluminate-based cements derived from industrial process wastes10.1016/0008-8846(93)90181-8 ↗
12. The synthesis and hydration of ternesite, Ca5(SiO4)2SO410.1016/j.cemconres.2018.06.012 ↗
13. Preparation and performance of ternesite–Ye’elimite cement10.3390/ma15124369 ↗
14. Synthesis of belite sulfoaluminate-ternesite cements with phosphogypsum10.1016/j.cemconcomp.2015.09.003 ↗
15. Ternesite-calcium sulfoaluminate cement: preparation and hydration10.1016/j.conbuildmat.2022.128187 ↗
16. Preparation and hydration of Belite-Ye’elimite-Ternesite clinker based on industrial solid waste
17. Hydration and properties of cement in the Belite-Ye′elimite-Ternesite system
18. Influence of gypsum fineness in the first hours of cement paste: hydration kinetics and rheological behaviour10.1016/j.conbuildmat.2018.06.235 ↗
19. M.L.P. Antunes, A. Botignon De Sá, P.S. Oliveira, E.C. Rangel, Utilization of gypsum from construction and demolition waste in Portland cement mortar, in: Associacao Brasileira de Ceramica, Cerâmica (Sao Paulo, Braz.), 2019, p. 1-6..10.1590/0366-6913201965s12588 ↗
20. Bibliometric study of the application of gypsum residues and by-products in Portland cement and mortar10.1016/j.conbuildmat.2023.134072 ↗
21. Effect of gypsum addition on acid resistance of ye'elimite rich calcium sulfoaluminate cement10.1016/j.cemconcomp.2023.105335 ↗
22. Optimization of the SO3 content of an Algerian Portland cement: Study on the effect of various amounts of gypsum on cement properties10.1016/j.conbuildmat.2017.12.218 ↗
23. Optimization of gypsum and slag contents in blended cement containing slag10.1016/j.cemconcomp.2020.103674 ↗
24. Using gypsum to control hydration kinetics of CSA cements10.1016/j.conbuildmat.2017.07.217 ↗
25. W.G. Mumme, R.J. Hill, G. Bushnell-Wye, Rietveld crystal structure refinements, crystal chemistry and calculated powder diffraction data for the polymorphs of dicalcium silicate., Neues Jahrb. Für Mineral. Abhandlungen. 169 (1995) 35-68..
26. Structure of calcium aluminate sulfate Ca4Al6O16$10.1016/0022-4596(95)80002-7 ↗
27. Ternesite, Ca5(SiO4)2SO4, a new mineral from the Ettringer Bellerberg/Eifel, Germany10.1007/BF01163138 ↗
28. ZUR KRISTALLSTRUKTUR VON CaAl2O410.1016/0022-1902(76)80011-5 ↗
29. Neutron powder diffraction profile refinement studies on Ca11.3Al14O32.3 and CaClO(D0.88H0.12)10.3891/acta.chem.scand.41a-0110 ↗
30. Anhydrite: a refinement10.1107/S0567740875007145 ↗
31. X-ray determination of electron-density distributions in oxides, MgO, MnO, CoO, and NiO, and atomic scattering factors of their constituent atoms10.2183/pjab.55.43 ↗
32. Hydration of calcium sulfoaluminate cements — Experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗
33. Hydration of calcium sulfoaluminate cement at less than 24h10.1680/adcr.2002.14.4.141 ↗
34. Characterization and calorimetric study of early-age hydration behaviors of synthetic ye’elimite doped with the impurities in phosphogypsum10.1007/s10973-015-5009-y ↗
35. Hydration characteristics of calcium sulfoaluminate (CSA) cement/portland cement blended pastes
36. Studies on the early hydration of two modifications of ye'elimite with gypsum10.1016/j.cemconres.2016.11.009 ↗
37. Belite-calcium sulfoaluminate cement prepared with phosphogypsum: influence of P2O5 and F on the clinker formation and cement performances10.1016/j.conbuildmat.2019.01.112 ↗
38. Calcium sulfoaluminate (Ye'elimite) hydration in the presence of gypsum, calcite, and vaterite10.1016/j.cemconres.2014.07.004 ↗
39. Water-to-cement ratio of calcium sulfoaluminate belite cements: hydration, setting time, and strength development
40. The effect of water and gypsum content on strätlingite formation in calcium sulfoaluminate-belite cement pastes10.1016/j.conbuildmat.2018.01.153 ↗
41. J. Kasper, R. Simmat, C. Dannert, SINTERING BEHAVIOUR OF REFRACTORY CASTABLES DETECTED BY CHANGES OF THEIR THERMAL DIFFUSIVITY, USB-Stick UNITECR2015–14th Biennial Worldwide Congress, 2015. https://www.researchgate.net/publication/373989588.
42. Belite-calcium sulphoaluminate cement prepared by EMR and BS: hydration characteristics and microstructure evolution behavior10.1016/j.conbuildmat.2022.127415 ↗
43. Study on hydration mechanism of Ternesite-Ye’elimite binary system10.1016/j.conbuildmat.2024.135699 ↗
44. Microstructure of amorphous aluminum hydroxide in belite-calcium sulfoaluminate cement10.1016/j.cemconres.2015.01.013 ↗
45. Hydration evolution and compressive strength of calcium sulphoaluminate cement constantly cured over the temperature range of 0 to 80°C10.1016/j.cemconres.2017.05.025 ↗
46. On the hydration of ternesite and the formation of thaumasite10.1016/j.cemconres.2023.107212 ↗