Potential of enhancing the joint of adjacent cement composites by incorporating edge-oxidized graphene oxide
Source abstract
Abstract
This study aims to investigate the effect of adding Edge-Oxidized Graphene Oxide (EOGO) to cement paste to enhance its bonding to different cement materials (cement mortar in this study). The current study employs the feature of incorporating EOGO into the cement matrix by accelerating the cement hydration and producing a flower-shaped cement production to improve the interlock of two different layers of cement matrices. To perform that, samples were constructed of two layers which are paste and mortar. Different amounts of EOGO were only added to the paste layer to allow them to fully interact with cement material. So, seven mixtures were prepared that include a single-layer sample of paste (P) and mortar (M), and two-layer samples of mortar and paste with different contents of EOGO which are 0.01 %, 0.05 %, 0.10 %, and 0.50 % by the weight of cement. The mechanical properties result as well as microstructural analysis results show that there is a potential for EOGO to enhance the bonding of two different cement productions supported by statistical analysis with a 95 % confidence level. The results also show adding EOGO with a percentage of 0.10 % by the cement weight has the best performance among other contents
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Graphene and Nanomaterials Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Aperture and permeability of aged concrete joints10.1016/j.conbuildmat.2021.124783 ↗
2. ACI Committee 224, Joints in Concrete Construction, 2001.
3. A review of previous studies on the construction joints in reinforced concrete beams
4. The effect of concrete vertical construction joints on the modulus of rupture
5. Shear-friction behavior of grooved construction joints between a precast UHPC girder and a cast-in-place concrete slab10.1016/j.engstruct.2020.111610 ↗
6. Grouted sleeve connections used in precast reinforced concrete construction – experimental investigation of a column-to-column joint10.1016/j.engstruct.2016.09.021 ↗
7. Flexural behaviour of reinforced concrete beams with horizontal construction joints10.1088/1757-899X/1090/1/012003 ↗
8. Material characterization to assess effectiveness of surface treatment to prevent joint deterioration from oxychloride formation mechanism10.1016/j.cemconcomp.2019.103394 ↗
9. The effect of construction joints on the flexural bending capacity of singly reinforced beams
10. Effect of construction joints on the splitting tensile strength of concrete
11. Warner · 2013
12. Edge-oxidized graphene oxide (EOGO) in cement composites: cement hydration and microstructure10.1016/j.compositesb.2019.05.006 ↗
13. Reinforcing effects of graphene oxide on portland cement paste10.1061/(ASCE)MT.1943-5533.0001125 ↗
14. Effects of graphene oxide on early-age hydration and electrical resistivity of Portland cement paste10.1016/j.conbuildmat.2017.01.066 ↗
15. Effect of graphene oxide nanosheets of microstructure and mechanical properties of cement composites10.1016/j.conbuildmat.2013.08.022 ↗
16. Mechanical properties and microstructure of a graphene oxide-cement composite10.1016/j.cemconcomp.2015.02.001 ↗
17. Effect of graphene oxide on the hydration process and macro-mechanical properties of cement10.1016/j.bsecv.2024.03.001 ↗
18. Study on the properties of graphene oxide reinforced cement-based materials at high temperature10.1016/j.conbuildmat.2024.135704 ↗
19. Effect of temperature on interface debonding behavior of graphene/graphene-oxide on cement-based composites
20. ASTM, C 150/ C150M: Standard Specification for Portland Cement, Annu. B. ASTM Stand. pp. 1–8, 2017.
21. ASTM, C128 - 15: Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate, doi: 10.1520/C0128-15.10.1520/C0128-15 ↗
22. https://asbury.com, “Asbury Carbons.”.
23. http://www.garmortech.com/technology.htm, “Garmor.”.
24. ASTM, C305 − 14: Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, doi: 10.1520/C0305-14.10.1520/C0305-14 ↗
25. Mechanical and sorptivity characteristics of edge-oxidized graphene oxide (EOGO)-cement composites: Dry-and wet-mix design methods10.3390/nano8090718 ↗
26. ASTM, C109/C109M − 16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), doi: 10.1520/C0109_C0109M–16A.10.1520/C0109_C0109M-16A ↗
27. ASTM, C348 − 14: Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars, doi: 10.1520/C0348–14.10.1520/C0348-14 ↗
28. ASTM, C830–00: Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure, doi: 10.1520/C0830–06R11.
29. The optimum interval time of layered cement composites withthe incorporation of edge-oxidized graphene oxide.10.3390/buildings14082307 ↗
30. Reactive molecular dynamics and experimental study of graphene-cement composites: Structure, dynamics and reinforcement mechanisms10.1016/j.carbon.2017.01.013 ↗
31. Effects of graphene oxide agglomerates on workability, hydration, microstructure and compressive strength of cement paste10.1016/j.conbuildmat.2017.04.058 ↗