journal article·2024-12Open access

A three-phase model based on boundary element method for simulation of chloride diffusion in concrete

Weiying Liang, Zheng Chen, Jiamin Yu

Abstract

Chloride-induced corrosion of steel reinforcements has been identified as one of the main causes of deterioration of concrete structures. A feasible numerical method is required to predict chloride penetration in concrete structures. In this study, a three-phase model of concrete based on the Boundary Element Method (BEM) is proposed to investigate the diffusion and distribution behavior of chlorides in concrete. Compared with the finite element model (FEM), the proposed model has a higher computational efficiency, and a comparison of the simulated chloride concentration with the corresponding experimental data is proved to be reasonable. Furthermore, the parametric analysis is carried out to evaluate the effect of coarse aggregate parameters on chloride diffusion in concrete. The results show that chloride attack was more susceptible to the coarse aggregate content and less affected by the ITZ diffusion coefficient. This may be due to the fact that the volume fraction of aggregates in concrete is much higher than that in the ITZ. In addition, the low permeability of the coarse aggregate hindered the diffusion of chloride ions, while the ITZ around the aggregate accelerated the diffusion of chloride ions. when the aggregate content increases in a certain range from 12.56 % to 50.24 %, the hindering effect of aggregate on chloride ion diffusion is more obvious than the accelerating effect of ITZ.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Corrosion behaviour of bare and galvanized steel in geopolymer and ordinary portland cement based mortars with the same strength class exposed to chlorides10.1016/j.corsci.2018.02.014 ↗
2. Chloride-induced corrosion of steel in concrete: an overview on chloride diffusion and prediction of corrosion initiation time10.1155/2017/5819202 ↗
3. Analysis of corrosion risk due to chloride diffusion for concrete structures in marine environment
4. Degradation of concrete with addition of mineral admixture due to free chloride ion penetration under the effect of carbonation10.1016/j.corsci.2018.04.004 ↗
5. Big milestones in the study of rebar corrosion
6. Characteristics of the steel-concrete interface and their effect on the corrosion of steel bars in concrete10.1016/j.conbuildmat.2020.119162 ↗
7. Evaluation of chloride ion penetration through concrete surface electrical resistivity of field naturally degraded structures present in marine environment10.1016/j.conbuildmat.2019.116979 ↗
8. Statistical investigation of different analysis methods for chloride profiles within a real structure in a marine environment10.1016/j.oceaneng.2018.03.040 ↗
9. Service life modeling of a bridge in a tropical marine environment for durable design10.1016/j.conbuildmat.2017.12.080 ↗
10. Skin effect of chloride ingress in marine concrete: a review on the convection zone10.1016/j.conbuildmat.2020.120566 ↗
11. Prediction model of long-term chloride diffusion into plain concrete considering the effect of the heterogeneity of materials exposed to marine tidal zone10.1016/j.conbuildmat.2017.10.083 ↗
12. Modelling of 3D periodic cathodic protection problems in reinforced concrete structures with accelerated boundary element method10.1016/j.conbuildmat.2023.132211 ↗
13. Experimental and boundary element method study on the effect of stress on the polarization curve of cast aluminum alloy in sodium chloride solution10.1016/j.corsci.2017.12.019 ↗
14. Cathodic protection of a container ship using a detailed BEM model10.3390/jmse8050359 ↗
15. An accelerated boundary element method via cross approximation of integral kernels for large-scale cathodic protection problems10.1111/mice.12687 ↗
16. 3D meso-scale simulation of chloride ion transportation in cracked concrete considering aggregate morphology10.1016/j.conbuildmat.2022.126632 ↗
17. A 3D three-phase meso‑scale model for simulation of chloride diffusion in concrete based on ANSYS10.1016/j.ijmecsci.2022.107127 ↗
18. Diffusion of chloride ion in coral aggregate seawater concrete under marine environment10.1016/j.conbuildmat.2021.122821 ↗
19. Effect of aggregates spatial distribution on three-dimensional transport of chloride ions in reinforced concrete10.1016/j.conbuildmat.2020.119694 ↗
20. Developing a model for chloride transport through concrete considering the key factors
21. Modeling and computational homogenization of chloride diffusion in three-phase meso-scale concrete10.1016/j.conbuildmat.2020.121558 ↗
22. Analytical solution for chloride diffusivity of concrete with aggregate shape effect10.3390/ma14143957 ↗
23. Three-dimensional numerical prediction of elastic modulus of concrete as a three-phase composite with asymptotic homogenization10.1016/j.conbuildmat.2022.128640 ↗
24. Numerical study of the effects of three-dimensional concrete fine-scale modelling and aggregate morphology on chloride diffusion
25. A multi-phase model for predicting the effective diffusion coefficient of chlorides in concrete10.1016/j.conbuildmat.2011.06.024 ↗
26. Durability analysis of reinforced concrete structures based on concrete fine structure
27. Three-phase composite sphere model for the prediction of chloride diffusivity of concrete10.1061/(ASCE)0899-1561(2008)20:3(205) ↗
28. Assessing the influence of ITZ on the steady-state chloride diffusivity of concrete using a numerical model10.1016/j.cemconres.2009.06.002 ↗
29. Multi-scale prediction of the effective chloride diffusion coefficient of concrete10.1016/j.conbuildmat.2011.03.041 ↗
30. Multi-scale study on the mechanical properties of concrete based on crack propagation under hygrothermal coupling
31. A mechanical-diffusive peridynamics coupling model for meso-scale simulation of chloride penetration in concrete under loadings10.1016/j.conbuildmat.2020.118021 ↗
32. Numerical study on cracking and its effect on chloride transport in concrete subjected to external load10.1016/j.conbuildmat.2022.126797 ↗
33. Numerical approach of interaction between wave and flexible bridge pier with arbitrary cross section based on boundary element method10.1061/(ASCE)BE.1943-5592.0001628 ↗
34. Debonding development in cracked steel plates strengthened by CFRP laminates under fatigue loading: experimental and boundary element method analysis10.1016/j.tws.2021.108038 ↗
35. Interval boundary element method for 2D transient diffusion problem using the directed interval arithmetic10.1016/j.enganabound.2010.11.005 ↗
36. BEM-models for the propagation period of chloride induced reinforcement corrosion10.1002/maco.200603995 ↗
37. A formulation of the boundary element method for axisymmetric transient heat conduction10.1016/S0017-9310(81)80007-5 ↗
38. The dual reciprocity boundary element formulation for nonlinear diffusion problems10.1016/0045-7825(87)90010-7 ↗
39. A meso-scale numerical method for the simulation of chloride diffusivity in concrete10.1016/j.finel.2014.03.002 ↗
40. Compensation length of two-dimensional chloride diffusion in concrete using a boundary element model10.1007/s00707-012-0721-1 ↗
41. Service life of concrete structures under chloride salt attack analysed by the full-time domain initial value advancing boundary element method
42. Katsikadelis J.T. Boundary elements: theory and applications [M]. Elsevier, 2002.10.1016/B978-008044107-8/50006-7 ↗
43. Boundary element method for multiply connected domains10.1016/j.jmatprotec.2004.07.043 ↗
44. Simulation of chloride diffusivity for cracked concrete based on RBSM and truss network model10.3151/jact.6.143 ↗
45. A numerical study on chloride migration in cracked concrete using multi-component ionic transport models10.1016/j.commatsci.2015.01.013 ↗
46. Molecular interfacial properties and engineering performance of conductive fillers in cementitious composites10.1016/j.jmrt.2022.05.061 ↗
47. FEM simulation of chloride diffusion in modeled recycled aggregate concrete10.1016/j.conbuildmat.2011.08.073 ↗