Development of artificial shape-setting energy storage phosphorous building gypsum aggregate
Source abstract
Abstract
The research and development of new building materials such as phosphorous building gypsum is crucial to promote the utilisation of phosphogypsum resources by improving their value. This study developed a new type of shape-stabilised energy storage phosphorus building gypsum aggregate (ES-PBGA). The mechanical and thermal properties of ES-PBGA with Paraffin were investigated. The results indicate that the matrix of ES-PBGA had a good microstructure, and the optimal paraffin-embedding rate of ES-PBGA was 31.08%. The phase transition temperature and enthalpy of the endothermic and exothermic stages were 17.6 and 27.14 ℃, and 33.02 and 31.62 J/g, respectively. The cylinder pressure strength of ES-PBGA with paraffin (31.08%) was 4.32 MPa, which meets the requirements of artificial aggregate application. To verify the practicability of ES-PBGA, energy storage lightweight aggregate concrete was prepared with 0%, 25%, 50%, and 100% ES-PBGA to replace the lightweight shale ceramsite. The results show that ES-PBGA can improve the interface transition zone between cement-based materials and energy storage aggregates, thereby improving the strength, and has a relatively suitable thermal conductivity, thermal diffusion coefficient, and specific heat capacity. Furthermore, it is also a type of low-carbon energy storage aggregate, and its application in the field of energy storage composite building materials is a relatively new concept.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Concrete and Cement Materials Research · Masonry and Concrete Structural Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. "Environment hazard mitigation of waste gypsum and chalk: Use in construction materials."10.1016/j.conbuildmat.2010.06.088 ↗
2. Mine Wastes: Characterization, Treatment and Environmental ImpactsBernd G. Lottermoser
3. "Phosphogypsum recycling: a review of environmental issues, current trends, and prospects."10.3390/app11041575 ↗
4. "Environmental tracers for elucidating the weathering process in a phosphogypsum disposal site: Implications for restoration."
5. "Pollutant flows from a phosphogypsum disposal area to an estuarine environment: An insight from geochemical signatures."
6. Development and characterization a novel leakage-proof form stable composite of graphitic carbon nitride and fatty alcohol for thermal energy storage[J]10.1016/j.est.2022.105761 ↗
7. Experimental investigation of clay brick with sensible, latent, and hybrid thermal energy storage in buildings[J]
8. "Yearly analysis of peak temperature, thermal amplitude, time lag and decrement factor of a building envelope in tropical climate."10.1016/j.jobe.2020.101459 ↗
9. "Experimental assessment of position of macro encapsulated phase change material in concrete walls on indoor temperatures and humidity levels."10.1016/j.enbuild.2013.12.001 ↗
10. "Phase change materials integrated in building walls: A state of the art review."
11. Design, development, and analysis of modified concrete block integrated with thermal energy storage material for regulating indoor temperature[J]
12. Experimental evaluation of composite concrete incorporated with thermal energy storage material for improved thermal behavior of buildings[J]
13. "Synthesis and characterization of the paraffin/expanded perlite loaded with graphene nanoparticles as a thermal energy storage material in buildings."
14. Inventory of Carbon & Energy (ICE) Version 3.0
15. Life cycle assessment of foam concrete production in Latvia
16. A.M. Khudhair, M. Farid, A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials, 2021.10.1201/9780367567699-13 ↗
17. "Preparation and properties of fatty acids based thermal energy storage aggregate concrete."
18. "Experimental thermal study of a new PCM-concrete thermal storage block (PCM-CTSB)."10.1016/j.conbuildmat.2021.123540 ↗
19. "Thermal energy storage cement mortar containing n-octadecane/expanded graphite composite phase change material."10.1016/j.renene.2012.08.024 ↗
20. "The behavior of self-compacting concrete containing micro-encapsulated Phase Change Materials."10.1016/j.cemconcomp.2009.08.002 ↗
21. "Experimental investigation for the development of superior structural integrated thermocrete via incorporation of novel non-encapsulated paraffin aggregate."
22. "Development, mechanical properties and numerical simulation of macro encapsulated thermal energy storage concrete."10.1016/j.enbuild.2015.03.014 ↗
23. R..Jamshid,K..Omid,S..Reza,R.S,Alireza,S.A..Ghahari."Enhanced workability, durability, and thermal properties of cement-based composites with aerogel and paraffin coated recycled aggregates." Journal of Cleaner Production 297.
24. "Enabling high-strength cement-based materials for thermal energy storage via fly-ash cenosphere encapsulated phase change materials."10.1016/j.cemconcomp.2021.104033 ↗
25. "Developmentof thermal energy storage lightweight structural cementitious composites by means of macro-encapsulated PCM."10.1016/j.conbuildmat.2019.07.136 ↗
26. R.A.Khushnood,S.A.Memon,N.Lqbal. "Development of structural thermal energy storage concrete using paraffin intruded lightweight aggregate with nano-refined modified encapsulation paste layer
27. Development of a novel alkali-activated slag-based composite containing paraffin/ceramsite shape stabilized phase change material for thermal energy storage
28. Development of artificial geopolymer aggregates with thermal energy storage capacity
29. "Application of phase change materials in gypsum boards to meet building energy conservation goals."10.1016/j.enbuild.2016.12.046 ↗
30. "Comparative Life Cycle Assessment (LCA) between standard gypsum ceiling tile and polyurethane gypsum ceiling tile."
31. "Inclusion of methyl stearate/diatomite composite in gypsum board ceiling for building energy conservation."
32. water in gypsum (CaSO4·2H2O) and hemihydrate (CaSO 4·1/2H 2 O)10.1016/S0008-8846(01)00675-5 ↗
33. "Composition and microstructure of 50-year lightweight aggregate concrete (LWAC)from Nanjing Yangtze River bridge (NYRB)."10.1016/j.conbuildmat.2019.05.015 ↗
34. Using gypsum to control hydration kinetics of CSA cements10.1016/j.conbuildmat.2017.07.217 ↗
35. "An energy-efficient form-stable phase change materials synthesis method to enhance thermal storage and prevent acidification of cementitious composite."
36. "Preparation, characterization and thermal properties of Lauryl alcohol/Kaolin as novel form-stable composite phase change material for thermal energy storage in buildings."
37. Performance of novel thermal energy storage engineeredcementitious composites incorporating a paraffin/diatomite composite phasechange material10.1016/j.apenergy.2014.02.007 ↗
38. "Research on the incorporation of untreated flue gas desulfurization gypsum into magnesium oxysulfate cement."10.1016/j.jclepro.2020.122497 ↗
39. Paraffin/diatomite composite phase change material incorporatedcement-based composite for thermal energy storage10.1016/j.apenergy.2013.01.005 ↗
40. Phase change material integration in building envelopes in different building types and climates: modeling the benefits of active and passive strategies10.3390/app11104680 ↗
41. Incorporation of phase change materials into building envelope for thermal comfort and energy saving: a comprehensive analysis
42. Review on thermal energy storage with phase change materials (PCMs) in building applications10.1016/j.apenergy.2011.08.025 ↗
43. Gencel Osman,Sarı. Ahmet,Kaplan Gokhan,Ustaoglu Abid,Hekimoğlu Gökhan,Bayraktar Oguzhan Yavuz,Ozbakkaloglu Togay."Properties of eco-friendly foam concrete containing PCM impregnated rice husk ash for thermal management of buildings." Journal of Building Eng.
44. The effect of pore structure on the phase transition behavior of organic phase change substances."
45. "Preparation and thermal characterization of paraffin/metal foam composite phase change material."10.1016/j.apenergy.2013.04.050 ↗
46. "Effect of gypsum dosage on the hydration and strength of alite-ye'elimite cement synthesized at 1300°C."10.1016/j.conbuildmat.2021.123063 ↗
47. "The effects of chemical environment on the nucleation, growth, and stability of ettringite [Ca3Al(OH)6]2(SO4)3·26H2O."10.1016/j.cemconres.2003.10.023 ↗
48. Paraffin/expanded vermiculite composite phase change material as aggregate for developing lightweight thermal energy storage cement-based composites10.1016/j.apenergy.2015.09.069 ↗
49. Microstructure and properties of concrete using bottom ash and waste foundry sand as partial replacement of fine aggregates10.1016/j.conbuildmat.2013.12.051 ↗
50. Microstructural characterization and mechanical properties of bottom ash mortar10.1016/j.jclepro.2017.09.191 ↗
51. O..Gencel,A..Yaras,G..Hekimolu, A..Ustaoglu, E..Erdogmus,M. Sutcu. Cement based-thermal energy storage mortar including blast furnace slag/capric acid shape-stabilized phase change material: physical, mechanical, thermal properties and solar thermoregulation pe.
52. O. Gencel,G..Hekimoglu,A..Sari,M..Sutcu,Y..Er,A..Ustaoglu "A novel energy-effective and carbon-emission reducing mortars with bottom ash and phase change material: Physico-mechanical and thermal energy storage characteristics." Journal of Energy Storage D.
53. "Eco-friendly building materials containing micronized expanded vermiculite and phase change material for solar based thermo-regulation applications."
54. "Low hydration exothermic well cement system: The application of energy storage microspheres prepared by high-strength hollow microspheres carrying phase change materials."
55. "Paraffin/red mud phase change energy storage composite incorporated gypsum-based and cement-based materials: Microstructures, thermal and mechanical properties."10.1016/j.jhazmat.2018.10.061 ↗
56. "A sustainable cold bonded lightweight PCM aggregate production: Its effects on concrete properties."10.1016/j.conbuildmat.2018.05.269 ↗
57. Preparation and pore structure of energy-storage phosphorus building gypsum
58. "Hydrophobic nanosilica-stabilized graphite particles for improving thermal conductivity of paraffin wax-based phase-change materials."10.1016/j.est.2021.102417 ↗
59. . "Enhancing thermal conductivity of paraffin wax 53-57℃ using expanded graphite."10.1016/j.solmat.2019.110026 ↗
60. "Effect of polyethylene glycol and activated carbon macroparticles on thermal conductivity of paraffin wax for thermal storage applications."
61. "How phase (α and γ) and porosity affect specific heat capacity and thermal conductivity of thermal storage alumina
62. Heat management options to reduce carbon footprint of green zeolite faujasite synthesis from rice husk ash
63. The aggregates industry greenhouse gases: low emissions
64. "Design of low cost and low CO2 air-entrained fly ash blended concrete considering carbonation and frost durability."10.1016/j.jclepro.2020.122675 ↗
65. Cellulose derivatives and cellulose-metal-organic frameworks forCO2 adsorption and separation10.1016/j.jcou.2022.102163 ↗