In-plane shear strength of solid clay brick masonry reinforced with near surface mounted steel bars
Source abstract
Abstract
Structural walls made of solid brick masonry have been used for centuries in old buildings, which are vulnerable to earthquakes. Reinforcing this type of walls may increase the overall building seismic strength. In this paper, the in-plane behaviour of these types of walls, both plain and reinforced, was experimentally assessed through triplets shear tests. The reinforcement considered, with near surface mounted (NSF) steel bars, has already been studied in the scope of a broader ongoing research project. The in-plane strength of brick masonry walls is of utmost relevance for seismic resistance and strongly depends on their resistance to sliding that may occur along the horizontal mortar interfaces. The bricks and the laying mortars tested correspond to walls of buildings built between 1920 and 1950 that may be found in Lisbon and other cities. Triplet specimens (made of three stacked bricks connected by a laying mortar) were built and tested. Two types of mortar compositions were used, of an earlier and a later phase within the period referred above. Both types included unreinforced specimens and specimens reinforced with steel bars of different types. The specimens were subjected to direct horizontal shear tests to determine the relevant properties of the assemblage, namely the cohesion and friction angle of the brick mortar joints. The results obtained in this study may be used in the numerical modelling of ancient buildings with brick masonry walls granting a better correlation with real behaviour.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Seismic Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Aleksandra Zharkalli. Physical-mechanical properties of stone masonry of Gjirokastër, Albania10.3390/ma14051127 ↗
2. Learning from failure: damage and failure of masonry structures, after the 2017 Lesvos earthquake (Greece)10.1016/j.engfailanal.2020.104803 ↗
3. Damage classification of residential buildings in historical downtown after the ML5. 5 earthquake in Zagreb, Croatia in 2020
4. In‐plane strength of unreinforced masonry piers10.1002/eqe.860 ↗
5. In‐plane seismic response of brick masonry walls10.1002/(SICI)1096-9845(199711)26:11<1091::AID-EQE693>3.0.CO;2-6 ↗
6. Experimental characterization of stone masonry in shear and compression10.1016/j.conbuildmat.2009.06.045 ↗
7. A.A. Hamid, R.G. Drysdale, editors. Behavior of brick masonry under combined shear and compression loading. Proc 2nd Canadian Masonry Conference; 1980.
8. In-plane seismic behavior of brick masonry walls reinforced with twisted steel bars and conventional steel bars10.3390/buildings12040421 ↗
9. Characterization of the building stock in Mainland Portugal to study seismic risk (Original title: Caracterização do parque habitacional de Portugal Continental para estudos de risco sísmico)
10. Seismic vulnerability assessment of a mixed masonry-RC building aggregate by linear and nonlinear analyses10.1007/s10518-016-9900-0 ↗
11. Experimental assessment of shear strength parameters on rubble stone masonry specimens10.1016/j.conbuildmat.2013.06.036 ↗
12. Response of masonry bed joints in direct shear10.1061/(ASCE)0733-9445(1989)115:9(2276) ↗
13. Experimental research to characterise masonry materials
14. A.I. Marques. Rehabilitation of old buildings: reducing seismic vulnerability by strengthening the walls (Original title: Reabilitação de edifícios antigos: redução da vulnerabilidade sísmica através do reforço de paredes) [Doctoral dissertation]: Instituto Superior Técnico - Universidade de Lisboa; 2020.
15. Diagonal shear behaviour of unreinforced masonry wallettes strengthened using twisted steel bars10.1016/j.conbuildmat.2011.04.063 ↗
16. In-situ and laboratory based out-of-plane testing of unreinforced clay brick masonry walls strengthened using near surface mounted twisted steel bars10.1016/j.conbuildmat.2012.04.087 ↗
17. URM walls strengthened with fabric-reinforced cementitious matrix composite subjected to diagonal compression
18. Ultimate shear strength prediction model for unreinforced masonry retrofitted externally with textile reinforced mortar
19. Analytical model for the in-plane shear behavior of URM walls retrofitted with FRP10.1016/j.compscitech.2005.06.015 ↗
20. Experimental evaluation of brick masonry walls strengthened with TRM (Textile Reinforced Mortar) renders10.3390/buildings12060840 ↗
21. Experimental and numerical analysis of the behaviour of masonry walls strengthened with CFRP reinforced render
22. Experimental characterization of in-plane behaviour of old masonry walls strengthened through the addition of CFRP reinforced render
23. Strengthening of old masonry walls for out-of-plane seismic loading with a CFRP reinforced render
24. Bonding and anchoring of a CFRP reinforced render for the external strengthening of old masonry buildings
25. CEN. EN1052–3 - Methods of Test for Masonry: Part 3: Determination of Initial Shear Strength. 2002.
26. CEN. EN 772–1 - Methods of test for masonry units-Part 1: Determination of compressive strength. Comité Européen de Normalisation Brussels, Belgium. 2011.
27. In-plane seismic behavior of brick masonry walls reinforced with twisted steel bars and conventional steel bars10.3390/buildings12040421 ↗
28. CEN. EN 1015–11 - Methods of test for mortar for masonry–Part 11: Determination of flexural and compressive strength of hardened mortar. Comité Européen de Normalisation Brussels, Belgium. 1999.
29. CEN. EN 10080–Steel for the reinforcement of concrete–Weldable reinforcing steel–General. Comité Européen de Normalisation Brussels, Belgium. 2005.
30. Cohesive-frictional interface fracture behavior in soft-brick masonry: experimental investigation and theoretical development