Compressive behaviour of lump-grout material under lateral confinement: Laboratory tests
Source abstract
Abstract
The lump-grout (LG) material consisted of coarse lumps and pumpable grout has been developed as an alternative infill material to cementitious grout (CG) material in secondary standing support for underground mines. This paper aims to further explore the compressive behaviour of the LG material under variable lateral confinements. A total of 30 LG specimens and 15 CG specimens, either under the active confinement via a Hoek cell or the passive confinement with a fibre-reinforced polymer (FRP) jacket, were prepared and tested. The main test variables included the confining pressure (i.e., 0, 2, 4, 6, 8, 12, 16 MPa) applied by a Hoek cell and the FRP jackets made of variable FRP composites (i.e., CFRP, GFRP and UHMWPE FRP). Test results demonstrated that both the compressive strength and the axial deformation of the LG material were obviously enhanced attributed to effective lateral confinement. The stress path independence assumption was also verified from this research, which provided a feasible access to build the relationship between the active- and passive confinement to the LG material. The in-depth comparison with the CG material, the LG material is much suitable as the infill material for the standing support, in terms of its cost-effectiveness and environmentally friendly.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Development and evaluation of artificial expandable pillars for hard rock mining10.1016/j.ijrmms.2018.07.014 ↗
2. Experimental study on mechanical properties and failure behaviour of the pre-cracked coal-rock combination10.1007/s10064-020-02049-6 ↗
3. A hybrid tubular standing support for underground mines: compressive behaviour10.1016/j.ijmst.2020.11.004 ↗
4. Quantitative assessment of the spatio-temporal correlations of seismic events induced by longwall coal mining10.1016/j.jrmge.2022.04.002 ↗
5. Analysis of the design and performance characteristics of pumpable roof supports10.1016/j.ijmst.2016.10.003 ↗
6. State-of-the-art of standing supports for gob-side entry retaining technology in China10.17159/2411-9717/17/449/2019 ↗
7. Development of a new geopolymer based cementitious material for pumpable roof supports in underground mining
8. Novel hybrid FRP tubular columns with large deformation capacity: concept and behaviour10.1016/j.compstruct.2019.01.055 ↗
9. Standing support incorporating FRP and high water-content material for underground space10.1016/j.tust.2020.103809 ↗
10. A hybrid tubular standing support for underground mines: compressive behaviour10.1016/j.ijmst.2020.11.004 ↗
11. Utilisation of construction and demolition waste as cemented paste backfill material for underground mine openings10.1016/j.jenvman.2018.05.075 ↗
12. Synthesis of a CKD modified fly ash based geopolymer cementitious material for enhancing pumpable roof support10.1617/s11527-022-01899-8 ↗
13. An innovative tubular standing support incorporating PVC and FRP composites: laboratory tests10.1007/s10706-021-01895-9 ↗
14. Behaviour of lump-grout material filled PVC tubular column under uniaxial compression10.1016/j.conbuildmat.2022.129271 ↗
15. Compressive behavior of compound concrete containing demolished concrete lumps and recycled aggregate concrete10.1016/j.conbuildmat.2020.121624 ↗
16. Compressive fatigue behavior of compound concrete containing demolished concrete lumps10.1016/j.conbuildmat.2019.03.188 ↗
17. Experimental study of filling capacity of self-compacting concrete and its influence on the properties of rock-filled concrete10.1016/j.cemconres.2013.11.010 ↗
18. Behaviour of FRP-confined coal rejects based backfill material under compression10.1016/j.conbuildmat.2020.121171 ↗
19. Behavior of unconfined and polyethylene terephthalate (PET) FRP-confined coal reject concrete under compression
20. Behaviour of FRP-confined coal reject concrete columns under axial compression10.1016/j.compstruct.2021.113621 ↗
21. State of the art report on steel–concrete composite columns10.1016/S0143-974X(01)00021-9 ↗
22. D.J. Oehlers, M.A. Bradford, Composite Steel and Concrete Structures: Fundamental Behaviour: Fundamental Behaviour, Elsevier, 2013.
23. Axial compressive behavior of polyethylene terephthalate/carbon FRP-confined seawater sea-sand concrete in circular columns10.1016/j.conbuildmat.2019.117383 ↗
24. Compressive behavior of FRP ring-confined concrete in circular columns: effects of specimen size and a new design-oriented stress-strain model10.1016/j.conbuildmat.2018.12.183 ↗
25. Investigation of the influence of the application path of confining pressure: tests on actively confined and FRP-confined concretes10.1061/(ASCE)ST.1943-541X.0001177 ↗
26. Analysis-oriented stress–strain models for FRP–confined concrete10.1016/j.engstruct.2007.01.010 ↗
27. Design-oriented stress–strain model for FRP-confined concrete10.1016/S0950-0618(03)00045-X ↗
28. A stress-path dependent stress-strain model for FRP-confined concrete10.1016/j.engstruct.2019.109824 ↗
29. ASTM D3039/D3039M, Standard Test Method for Tensile Properties of Plastics, American Society for Testing and Materials, West Conshohocken, PA.
30. Minova, Technical Datasheet: CMT Grout, Sydney, Australia, 2020.
31. ASTM-C136 › Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, American Society for Testing and Materials, West Conshohocken, PA.
32. ASTM-D7012-10, Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures, American Society for Testing and Materials, West Conshohocken, PA, 2010.