journal article·2020-06Open access

Lamellae of waste beverage packaging (Tetra Pak) and gamma radiation as tools for improvement of concrete

Gonzalo Martínez-Barrera, Juan José del Coz-Díaz, Mar Alonso-Martínez, Miguel Martínez-López

Abstract

One of the most important problem when adding recycle or waste materials to cement concrete is the poor adhesion between these materials and the cement matrix. For this reason, in this work, the effects of lamellae from beverage packaging (waste Tetra Pak), as well as of gamma rays on the mechanical properties of cement concrete were evaluated. The concrete specimens were produced with cement, water, gravel and sand; this last was partial substituted by lamellae of waste Tetra Pak (up to 30 wt. %) with sizes ranging 1.5 mm and 3.0 mm. Then, the concrete was irradiated with gamma rays at doses of 200 kGy and 300 kGy. The results show improvements up to 39 % and 30 % for compressive strength and the elasticity modulus, respectively, for concrete produced with 10 % of waste lamellae and irradiated at 300 kGy, respect to the values obtained for control concrete (without lamellae and non-irradiated). Such improvements are produced by both gamma rays and the lamella concentrations. Mechanical features were related with the lamellae before and after irradiation, based on the morphological and thermal changes (analyzed by SEM and TGA-DSC analyses, respectively), as well as with the chemical stability of their components (polyethylene and cellulose), analyzed by FT-IR spectroscopy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Recycled materials in concrete
2. Use of selected waste materials in concrete mixes10.1016/j.wasman.2006.07.026 ↗
3. Waste cellulose from Tetra Pak packages as reinforcement of cement concrete10.1155/2015/682926 ↗
4. Pyrolysis of the tetra pak10.1016/j.wasman.2009.07.008 ↗
5. The effect of aluminium dross on mechanical and corrosion properties of concrete
6. Effects of oxygen on pyrolysis kinetics of tetra pack10.1061/(ASCE)0733-9372(2003)129:4(382) ↗
7. Manufacturing low density boards from waste cardboards containing aluminium10.1016/j.matdes.2006.06.014 ↗
8. Some of the physical and mechanical properties of composites made from Tetra Pak™/LDPE10.1177/0892705717734597 ↗
9. Microstructure and compressive strength of gypsum-bonded composites with papers, paperboards and Tetra Pak recycled materials10.1186/s10086-019-1821-5 ↗
10. Evaluation of mechanical and physical properties of hybrid composites from food packaging and textiles wastes10.1007/s10924-019-01369-3 ↗
11. Effect of recycled cellulose fibres on the properties of lightweight cement composite matrix10.1016/j.conbuildmat.2012.02.097 ↗
12. The use of recycled paper processing residues in making porous brick with reduced thermal conductivity10.1016/j.ceramint.2009.02.027 ↗
13. Thermal performance optimization of hollow clay bricks made up of paper waste10.1016/j.enbuild.2014.02.006 ↗
14. Cellulose modified fibres in cement based composites10.1016/j.compositesa.2009.09.016 ↗
15. Use of plastic in a concrete to improve its properties
16. Recent developments in polymer recycling, in “Gamma rays: technology
17. γ-Radiation induced changes in the physical and chemical properties of Lignocellulose10.1021/bm060168y ↗
18. Modification of microcrystalline cellulose by gamma radiation-induced grafting10.1016/j.radphyschem.2015.06.025 ↗
19. Production of polymer-plaster composite by gamma irradiation10.1016/j.pnucene.2011.06.014 ↗