Fatigue effects of embedding electric vehicles Charging Units into electrified road
Source abstract
Abstract
A charging infrastructure network for Battery Electric Vehicles (BEV) is more than an option for the transportation scenarios of the next years. From a pavement engineering point of view, this network consists in prefabricated Charging Units (CU) embedded into the road pavement, generating additional questions related to the structural life of the pavements in which the CU are located. Moreover, even if in the available literature few studies describe the structural response of e-road, the long-term performances of pavements are not fully investigated. This is the reason why this research analyzes fatigue behavior of electrified road (e-road) in comparison with traditional road (t-road). In particular, the study is devoted to identifying the number of critical load cycles leading to failure an e-road pavement. As a second stage, the theoretical and numerical results are verified applying the findings obtained during the first stage of the research to a real case study: Viale Forlanini in Milan (Italy), which is an important two carriageway road connecting the city center to the Linate airport. As a result of these analyzes, interesting outcomes were obtained regarding the fatigue effects of embedding CU into road pavement, estimating the service life and demonstrating that CU seems to be compatible with the structural effectiveness of the pavement, as also confirmed by the case study results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Wireless Power Transfer Systems · Advanced Sensor and Energy Harvesting Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Nodari · 2021 · 149
2. Towards an understanding of the structural performance of future electrified roads: a finite element simulation study10.1080/10298436.2017.1279487 ↗
3. Li Yongqi, Asphalt Pavement Fatigue Cracking Modeling, Louisiana State University - LSU Historical Dissertations and Theses, 1999. 〈https://digitalcommons.lsu.edu/gradschool_disstheses/6999〉.
4. NCHRP, Guide for Mechanistic-Empirical Design of New and Rehabilitated Pavement Structures - Appendix II-1, (2004).
5. Modelling tensile strain response in asphalt pavements: bottom-up and/or top-down fatigue crack initiation
6. Wide-base single-tire and dual-tire assemblies: comparison based on experimental pavement response and predicted damage10.3141/2369-06 ↗
7. AASHTO, Mechanistic-Empirical Pavement Design Guide - A Manual of Practice, 2015. https://doi.org/10.1201/b17043–14.10.1201/b17043-14 ↗
8. C. Nodari, M. Crispino, E. Toraldo, Bituminous mixtures with high environmental compatibility: laboratory investigation on the use of reclaimed asphalt and steel slag aggregates 76 2020 433 442 doi: 10.1007/978-3-030-48679-2_41.10.1007/978-3-030-48679-2_41 ↗
9. Laboratory investigation on the use of recycled materials in bituminous mixtures for dense-graded wearing course
10. ANAS S.p.A:, Capitolato Speciale d′Appalto, Parte 2 Norme Tecniche, Pavimentazioni stradali/autostradali ed. 2010, n.d.
11. M.C. Marchionna, M.G. Fornaci, M. Malgarini, Modello di Degradazione Strutturale Delle Pavimentazioni, (1985).
12. Google Maps - Viale Forlanini, (n.d.). 〈https://www.google.it/maps/@45.4618283,9.2655403,3a,75y,91.92h,83.2t/data=!3m6!1e1!3m4!1sWkb2×09xzOBQ0JBipIXSNQ!2e0!7i16384!8i8192〉 (accessed May 25, 2021).
13. Comune di Milano, PUMS - Piano Urbano della Mobilità, (n.d.). https://www.comune.milano.it/aree-tematiche/mobilita/pianificazione-mobilita/piano-urbano-della-mobilita (Accessed 26 May 2021).
14. Catalogo delle Pavimentazioni Stradali