Benefits of using mineral additives, as components of the modern oil-well cement
Source abstract
Abstract
In this study the Influence of fine mineral additives such as zeolite tuff, metakaolin, microspheres and fly ash on the properties of light-weight oil-well cement was investigated. Strength, physical and performance requirements of light-weight oil-well cements were determined. The results have shown that the most effective facilitating additive which gives the lowest density is the microsphere. However, at raised pressures, it has been revealed that walls of the grains of the microspheres do not withstand a pressure of more than 20 MPa, and thus they will be destroyed leading to an increase in the density of the slurry and significantly limits the permissible depth for using this composition. On the other hand, it was found that using zeolite in combination with metakaolin improves the physico-mechanical properties of the oil-well cement stone. Keywords: Oil-Well cement, Zeolite tuffs, Metakaolin, Microspheres, Light-weight oil-well cement
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Industrial Engineering and Technologies · Drilling and Well Engineering · Mining and Gasification Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Magarini · 1999 · 97
2. Modified oil-well cements for casing boreholes with abnormally low stratum pressure
3. Taylor · 1990
4. The effect of dehydroxylaton/amorphization degree on pozzolanic activity of kaolinite10.1016/S0008-8846(02)00975-4 ↗
5. Origin of the pozzolanic effect of rice husks10.1016/S0950-0618(00)00045-3 ↗
6. Potential utilization of solid waste (bagasse ash)
7. Calorimetric evolution of the early pozzolanic reaction of natural zeolites10.1007/s10973-009-0449-x ↗
8. Influence of carbon nanotubes, nanosilica and nanometakaolin on some morphological-mechanical properties of oil well cement pastes subjected to elevated water curing temperature and regular room air curing temperature10.1016/j.conbuildmat.2017.04.124 ↗
9. The effect of lightweight agents on the density of cement slurry applied during oil and gas well drilling
10. Specification for well cements
11. Samsuri · 2001 · 1
12. Bett · 2010 · 99
13. Bourgoyne · 1986 · 85
14. Characterization of surfactant-enhanced cement fluid-loss additives