Preparation, microstructural characterization, and bio-corrosion resistance of novel high-performance marine concrete admixture
Source abstract
Abstract
Marine biofouling is a critical factor threatening the safety of marine concrete structures, making the development of effective anti-biofouling methods highly significant for engineering applications. This study addressed the inherent limitations of traditional coating protection by focusing on the anti-biofouling performance of internally mixed concrete rather than coatings. Two novel high-performance anti-biofouling composite admixtures were developed: Composite A (Silica-Copper Silicate-Copper Ferrocyanide Composite) and Composite B (Polyaniline-Copper Silicate Composite). The synthesis methods of these composites were described, and their microstructures were characterized to confirm the formation of effective anti-corrosion compounds. The elemental composition and crystal structure of the active components in Composites A and B were determined. Dispersion tests demonstrated that both composites exhibited excellent dispersibility, with Composite A showing slightly better performance than Composite B. Comparative antibacterial tests against common corrosive marine bacteria revealed strong antimicrobial properties for both composites, with their inhibition rates under varying conditions analyzed. Concrete specimens incorporating Composite A were fabricated and subjected to offshore immersion tests, followed by analysis of macro-biofouling colonization and evaluation of their mechanical properties. The results demonstrated that the incorporation of Composite A effectively inhibited macro-biofouling colonization while exhibiting minimal impact on the mechanical properties of concrete, meeting its safety requirements. Furthermore, a Composite A-modified concrete pier was cast at the Donggaoxi Bridge in Fujian, China, for long-term field observation of macro-biofouling colonization. The results comprehensively assessed the anti-macro-biofouling efficacy of Composite A in real marine environments.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Carbon dioxide utilization in catalysis · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Biomimetic superhydrophobic surface of concrete: topographic and chemical modification assembly by direct spray10.1016/j.conbuildmat.2018.06.063 ↗
2. Research and application progress of nano-modified coating in improving the durability of cement-based materials
3. Superhydrophobic anticorrosive coating for concrete through in-situ bionic induction and gradient mineralization10.1016/j.conbuildmat.2020.119510 ↗
4. Advances in the mitigation of microbiologically influenced concrete corrosion: a snapshot10.3390/ma17235846 ↗
5. Present and prospect of microbial corrosion prevention of concrete
6. The impact of artificial surfaces on marine bacterial and eukaryotic biofouling assemblages: a high-throughput sequencing analysis10.1016/j.marenvres.2017.12.003 ↗
7. P. Hughes, An investigation into marine biofouling and its influence on the durability of concrete sea defences, 2014.
8. Isolation and characterization of microorganisms involved in the biodeterioration of concrete in sewers10.1016/S0964-8305(00)00064-0 ↗
9. Biodeterioration of concrete by thiobacilli and nitrifying bacteria
10. Microbial enhanced corrosion of hydraulic concrete structures under hydrodynamic conditions: microbial community composition and functional prediction10.1016/j.conbuildmat.2020.118609 ↗
11. Biodeterioration of asbestos cement by siderophore-producing pseudomonas10.1016/j.jhazmat.2020.123699 ↗
12. Hydrothermal process reduced pseudomonas aeruginosa PAO1-driven bioleaching of heavy metals in a novel aerated concrete synthesized using municipal solid waste incineration bottom ash10.1016/j.cej.2018.10.155 ↗
13. Bacillus subtilis bacteria used in fiber reinforced concrete and their effects on concrete penetrability10.1016/j.conbuildmat.2019.117051 ↗
14. Durability deterioration of concrete under marine environment from material to structure: a critical review
15. Bioerosion of concrete and limestone by marine organisms: a 13 year experiment from Jamaica10.1016/0025-326X(88)90234-2 ↗
16. Effects of marine shellfish on mechanical properties and microstructure of coral concrete10.3390/buildings13092193 ↗
17. The effect of biofouling on cement based concrete substrate: insights from microfouling and macrofouling growth
18. Effects of fouling organisms on the corrosion of marine concrete
19. Effect of barnacle oyster attachment on concrete properties
20. Research progress on new environmentally friendly antifouling coatings in marine settings: a review10.3390/biomimetics8020200 ↗
21. Research strategies to develop environmentally friendly marine antifouling coatings10.3390/md18070371 ↗
22. Inexpensive and non-fluorinated superhydrophobic concrete coating for anti-icing and anti-corrosion10.1016/j.jcis.2019.01.014 ↗
23. A review on surface treatment for concrete – part 2: performance10.1016/j.conbuildmat.2016.11.128 ↗
24. Influence of quaternary ammonium salt functionalized chitosan additive as sustainable filler for High-Density polyethylene composites10.3390/ma15217418 ↗
25. Effect of silica fume, metakaolin, and low-calcium Fly ash on chemical resistance of concrete10.1016/S0008-8846(01)00548-8 ↗
26. Mitigation of sulphate-reducing bacteria attack on the corrosion of 20SiMn steel rebar in sulphoaluminate concrete using organic silicon quaternary ammonium salt10.1016/j.conbuildmat.2020.119047 ↗
27. Resistance of alkali-activated slag mixed with wastewater towards biogenic sulfuric acid attack
28. C10H18N2Na2O10 inhibition and adsorption mechanism on concrete steel-reinforcement corrosion in corrosive environments
29. Carbon nanofibers (CNFs) dispersed in ultra-high performance concrete (UHPC): mechanical property, workability and permeability investigation10.1016/j.cemconcomp.2022.104592 ↗
30. Preparation of h-BN@ZnO composite epoxy coating for improve durability and antibacterial properties of concrete
31. The effect of antifreeze additives on fresh concrete subjected to freezing and thawing cycles10.1016/j.coldregions.2016.04.008 ↗
32. A review on the deterioration and approaches to enhance the durability of concrete in the marine environment10.1016/j.cemconcomp.2020.103695 ↗
33. Comparative study on the susceptibility of freshwater species to copper-based pesticides10.1016/j.chemosphere.2004.04.026 ↗
34. Epoxy-matrix polyaniline/p -phenylenediamine-functionalised graphene oxide coatings with dual anti-corrosion and anti-fouling performance10.1039/D0RA10665H ↗
35. Influence of dispersants and dispersion on properties of nanosilica modified cement-based materials10.1016/j.cemconcomp.2021.103969 ↗
36. Achieving superior anticorrosion and antibiofouling performance of polyaniline/graphitic carbon nitride composite coating
37. Facile synthesis of copper ferrocyanide-embedded magnetic hydrogel beads for the enhanced removal of cesium from water10.1016/j.chemosphere.2019.02.199 ↗
38. The mechanism of copper ion solidification by calcium silicate hydrate and the influence of defects: a first-principles study10.1016/j.conbuildmat.2025.140271 ↗
39. Functionalized graphene-based materials for cementitious applications10.1039/D3RA06886B ↗
40. A novel hydrophilic modification method of EPS particles: conception design and performances in concrete10.1016/j.cemconcomp.2023.105199 ↗
41. Improvement of the concrete permeability by using hydrophilic blended additive10.3390/ma12152384 ↗
42. Resistance of concrete with crystalline hydrophilic additives to Freeze–Thaw cycles10.3390/app14062303 ↗
43. Detection of in situ early corrosion on Polymer-Coated metal substrates10.1021/acsami.9b09679 ↗
44. Catalytic conversion of atmospheric CO2 into organic carbonates by Nickel(II) complexes of Diazepane-Based N4 ligands10.1021/acs.inorgchem.9b01908 ↗
45. Metal–Organic frameworks of Cu(II) constructed from functionalized ligands for high capacity H2 and CO2 gas adsorption and catalytic studies10.1021/acs.inorgchem.9b03012 ↗
46. Highly efficient Solvent-free conversion of CO2 into cyclic carbonates by Acrylamide–KI10.1021/acs.iecr.0c00778 ↗
47. Organic carbonates as solvents in synthesis and catalysis10.1021/cr900393d ↗
48. Reactive applications of cyclic alkylene carbonates10.1021/ie020678i ↗
49. Ethylene carbonate in extraction and absorption: a review10.3103/S1068364X11040077 ↗
50. Experimental methods in chemical engineering: zeta potential10.1002/cjce.23914 ↗
51. Zeta potential and colloidal stability predictions for inorganic nanoparticle dispersions: effects of experimental conditions and electrokinetic models on the interpretation of results10.1021/acs.langmuir.1c02056 ↗
52. Design of functional peptide-assembled polymer nanoparticles with uniform dispersion for oligonucleotide delivery to the brain and spinal cord via the nose-to-brain route
53. Particle size analysis — dynamic light scattering (DLS)
54. Pseudomonas aeruginosa lifestyle: a paradigm for adaptation, survival, and persistence10.3389/fcimb.2017.00039 ↗
55. Chlorine injury enhances antibiotic resistance in pseudomonas aeruginosa through over expression of drug efflux pumps10.1016/j.watres.2019.03.035 ↗
56. Pseudomonas aeruginosa: all roads lead to resistance10.1016/j.tim.2011.04.005 ↗
57. Bacterial kinetics of sulfur oxidizing bacteria and their biodeterioration rates of concrete sewer pipe samples10.1061/(ASCE)EE.1943-7870.0000215 ↗
58. China · 2020
59. Code for design of concrete structures