Experimental investigation of the surface properties of accidental stained carbonate natural stones
Source abstract
Abstract
Marmara White (MW), Bursa Beige (BB), Emprador (EM), and Kütahya Black (KB) natural stones are widely used as kitchen countertops and wet floor covering materials in our country. This study investigated the changes in these natural stones' gloss, roughness, and total color change properties due to the spillage of eight different food, beverage, and cleaning materials. Staining-cleaning cycles were applied to natural stones for 1, 3, and 7 days. In addition, with the help of field emission scanning electron microscopy (FESEM) analysis, the damage caused by these stain effects on the internal structures of these natural stones was investigated. According to the results obtained from the study, after three staining-cleaning cycles, the highest gloss loss was observed in the KB sample at the rate of 97.15 % after the descaler effect, while the minor gloss loss was obtained in the MW sample at the rate of 82.16 %. Furthermore, the highest roughness increase was observed in the KB sample at the rate of 555.1 % after the effect of descaler, while the slightest increase in roughness was obtained in the MW sample at the rate of 395 %. In addition, cooking oil has the most negative effect on natural stones' total color change (ΔE) properties. After three staining-cleaning cycles of the cooking oil effect, ΔE = 20.86 was obtained in the MW sample, while this value was 3.25 in the KB sample.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Building materials and conservation · Cultural Heritage Materials Analysis · Conservation Techniques and Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. The durability of marble cladding a comprehensive literature review10.1520/JAI100857 ↗
2. Investigation of gamma-ray shielding effectiveness of natural marble used for external wall cladding of buildings in Riyadh10.1016/j.rinp.2017.05.017 ↗
3. Shaking table testing of granite cladding with undercut bolt anchorage10.1016/j.engstruct.2018.05.116 ↗
4. Ultrafast laser surface texturing: a sustainable tool to modify wettability properties of marble10.3390/su11154079 ↗
5. Definition of a condition-based model for natural stone claddings
6. Durability of a sunlight-curable organic–inorganic hybrid protective coating for porous stones in natural and artificial weathering conditions10.1016/j.porgcoat.2016.07.018 ↗
7. Impact of salt and frost weathering on the physical and durability properties of travertines and carbonate tufas used as building material10.1007/s12665-018-7339-0 ↗
8. Predicting unconfined compressive strength decrease of carbonate building materials against frost attack using nondestructive physical tests10.3390/su12041379 ↗
9. An experimental investigation into the salt-weathering susceptibility of building limestones10.1007/s00603-020-02208-x ↗
10. Characterization of travertine stones from Turkey and assessment of their durability to salt crystallization
11. Pettijohn · 1975 · 628
12. Stain test for natural stones
13. Protection of decorative limestone against microbial and chemical causes of organic stain
14. Effects of accidental staining in carbonate stones: physical, chemical and mineralogical changes10.1016/j.conbuildmat.2021.123774 ↗
15. Effects of staining agents on an ornamental granite
16. Orange, yellow, brownish stains and alteration on white marble at El Montazah in Alexandria, Egypt10.1080/15583058.2020.1741724 ↗
17. Risk in cleaning: chemical and physical exposure10.1016/S0048-9697(98)00110-7 ↗
18. The staining of blue stone limestones petrographically unraveled10.1016/j.matchar.2007.03.015 ↗
19. Manning J.T., Anderson K.T., Schnell T. , 2009) “Enzymatic Antibacterial Cleaner HavingHigh pH Stability,” U.S. Patent Application 2009/0311136 (2009).
20. Effective cleaning of rust-stained marble, Heritage
21. Suitability of the isolated chicken eye test for classification of extreme pH detergents and cleaning products10.1016/j.tiv.2014.12.020 ↗
22. Application of microbial cleaning technology for removal of surface contamination
23. Evaluation of side effects of mechanical cleaning with an anionic detergent on granite cladding tiles10.1007/s11356-020-11733-9 ↗
24. Influence of surface roughness on color changes in building stones10.1002/col.10178 ↗
25. Staining of white marble10.1016/j.matchar.2007.05.004 ↗
26. Predicting iron staining of siderite-bearing microsyenites intended for dimension stone use10.1016/j.conbuildmat.2006.08.020 ↗
27. Effects of protective treatments on particle deposition and color variation in stone surfaces exposed to an urban environment10.1016/j.porgcoat.2017.06.029 ↗
28. Chemical and colorimetric analysis for the characterization of degradation forms and surface colour modification of building stone materials10.1016/j.conbuildmat.2021.124356 ↗
29. The staining and discoloration of stone10.1108/02630809310028567 ↗
30. Öcal A.D., Dal M. , 2012) Doğal Taşlardaki Bozunmalar, Mimarlık Vakfı İktisadi İşletmesi, Müka Matbaası, İstanbul.
31. Thermal deterioration of marbles: Gloss, color changes10.1016/j.conbuildmat.2015.10.200 ↗
32. The role of porosity on the engineering geological properties of 1669 lavas from Mount Etna10.1016/j.enggeo.2017.02.020 ↗
33. Thermally induced deterioration behavior of two dolomitic marbles under heating-cooling cycles10.1098/rsos.180779 ↗
34. On the estimation of marbles weathering by thermal action using drilling resistance
35. Comparative analysis of water condensate porosity using mercury intrusion porosimetry and nitrogen and water adsorption techniques in porous building stones10.1016/j.conbuildmat.2021.123131 ↗
36. The deterioration of circular mausoleum, Roman necropolis of Carmona, Spain
37. Accelerate ageing on building stone materials by simulating daily, seasonal thermo-hygrometric conditions and solar radiation of CSA Mediterranean climate10.1016/j.conbuildmat.2020.121009 ↗
38. Aesthetics and gloss of ground surfaces: a review on measurement and generation10.1115/1.4032587 ↗
39. The use of natural stone for internal flooring10.1680/coma.10.00015 ↗
40. “On the relations between color, gloss, and surface texture in injection-molded plastics.”10.1002/col.20510 ↗
41. Effect of surface finish on roughness, color, and gloss of ornamental granites10.1061/(ASCE)MT.1943-5533.0000285 ↗
42. Relationship between the mechanical properties and the surface roughness of marble10.3139/146.110728 ↗
43. Investigation of resistance to ageing by SO2 on some building stones10.1016/j.conbuildmat.2020.120341 ↗
44. Berns · 2000
45. Sharma · 2003
46. Color difference Delta E - A survey
47. Mechanical and laser cleaning of spray graffiti paints on a granite subjected to a SO2-rich atmosphere10.1016/j.conbuildmat.2018.08.130 ↗
48. Conversion of a digital camera into a non-contact colorimeter for use in stone cultural heritage: The application case to Spanish granites10.1016/j.measurement.2014.06.023 ↗
49. Impact of subtropical island climate on the appearance and aesthetics of white marble buildings
50. Tailoring alkoxysilanes with poly (ethylene glycol) as potential consolidants for carbonate stones10.1016/j.conbuildmat.2021.123048 ↗
51. Superhydrophobic and superamphiphobic materials for the conservation of natural stone: An overview10.1016/j.conbuildmat.2021.126175 ↗
52. Simulation of acid rain weathering effect on natural and artificial carbonate stones10.1007/s12665-016-5555-z ↗
53. Microscopic & macroscopic characterizations of Beijing marble as a building material for UNESCO heritage sites: new insights into physico-mechanical property estimation and weathering resistance10.1016/j.conbuildmat.2019.07.094 ↗