Low-carbon alkali-activated materials for Cu(II)-contaminated soil stabilization: Reaction kinetics, immobilization mechanisms, and leaching behavior
Source abstract
Abstract
Alkali-activated cementitious materials (AAMs) are recognized as low-carbon binders with considerable potential in the solidification/stabilization (S/S) field. This study aimed to explore the influence of Cu 2 + on the reaction kinetics and products of AAMs and examined the immobilization mechanisms of Cu 2+ within the reaction products. Results indicated that the early reaction kinetics of AAMs was only slightly impacted by the incorporation of Cu 2+ , showing a strong compatibility between the AAMs and Cu 2+ . The addition of an increased alkali equivalent facilitated the formation of reaction products, optimized the pore structure of AAMs, and significantly improved the compressive strength and Cu 2+ encapsulation efficiency. However, incorporating Cu 2+ increased the content of large pores, which deteriorated the mechanical properties of AAMs. Notably, Cu 2+ chemically bonded in the amorphous phase by forming covalent bonds with silicon tetrahedra, which resulted in an increase in the MCL of C/N-A-S-H. Moreover, Cu 2+ could achieve chemical immobilization in the amorphous gel by ion substitution and bonding to anionic sites. Actual S/S analysis revealed that with 70 % Cu-contaminated soil, the leaching concentration of Cu in S/S blocks was as low as 0.61 mg/L, with a compressive strength of 8.9 MPa after 28 days. Compared to ordinary Portland cement (OPC), utilizing AAMs for S/S treatment of Cu-contaminated soil reduced carbon emissions by 58.5 %. Overall, this research affirmed AAMs as a viable low-carbon alternative for S/S treatments, providing a sustainable and economical option for the management of heavy metal-contaminated soils. • AAMs demonstrated exceptional immobilization performances to Cu 2+ . • Increasing alkali equivalent enhanced the immobilization efficiency of AAMs to Cu 2+ . • Cu 2+ was mainly captured by geopolymer gels through covalent binding and ion substitution. • AAMs was a promising strategy for low-carbon S/S of Cu-contaminated soil.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Clay minerals and soil interactions · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Strength, leaching characteristics and microstructure of CGF+P all-solid-waste binder solidification/stabilization Cu(Ⅱ) contaminated soil10.1016/j.conbuildmat.2023.134431 ↗
2. Strongly acidic lead contaminated soil solidification/stabilization using metakaolin-modified Fly ash phosphoric-based geopolymer10.1016/j.cej.2024.154336 ↗
3. Study on the solidification/stabilization of cadmium-contaminated soil by red mud-assisted blast furnace slag under excitation conditions10.1016/j.jclepro.2023.140505 ↗
4. Soil moisture dynamics regulates the release rates and lability of copper in contaminated paddy soils10.1016/j.scitotenv.2023.168525 ↗
5. Low temperature pyrolytic biochar is a preferred choice for sulfonamide-Cu(II) contaminated soil remediation in tropical climate region10.1016/j.scitotenv.2023.162792 ↗
6. Green remediation of as and pb contaminated soil using cement-free clay-based stabilization/solidification10.1016/j.envint.2019.02.057 ↗
7. Experiments and mechanisms for bottom vacuum leaching remediation of low permeability cu, Zn-contaminated soil10.1016/j.jclepro.2022.133038 ↗
8. Stabilization/solidification of radioactive borate waste via low-carbon limestone calcined clay cement (LC3)10.1016/j.jece.2024.113129 ↗
9. Solidification/stabilization of highly toxic arsenic-alkali residue by MSWI Fly ash-based cementitious material containing Friedel’s salt: efficiency and mechanism10.1016/j.jhazmat.2021.127992 ↗
10. Mechanisms of enhancing MgO for stabilization/solidification of Pb-contaminated red clay through CO2 sequestration10.1016/j.jenvman.2024.121810 ↗
11. Remediation techniques for heavy metal-contaminated soils: principles and applicability10.1016/j.scitotenv.2018.03.161 ↗
12. Solidification and utilization of municipal solid waste incineration ashes: advancements in alkali-activated materials and stabilization techniques, a review10.1016/j.jenvman.2024.122014 ↗
13. Discussion on the applicability and mechanism of phosphate-based geopolymers used for cadmium and cadmium-lead heavy metals solidification/stabilization10.1016/j.jece.2024.113846 ↗
14. Physical and high temperature properties of basalt fiber-reinforced geopolymer foam with hollow microspheres10.1016/j.conbuildmat.2023.134698 ↗
15. Solidification/stabilization and risk assessment of heavy metals in municipal solid waste incineration Fly ash: a review10.1016/j.scitotenv.2023.164451 ↗
16. Valorization of municipal solid waste incineration Fly ash in low-carbon alkali-activated materials10.1016/j.cej.2024.153577 ↗
17. Optimization of production parameters for rice husk ash-based geopolymer cement using response surface methodology
18. Advances in using municipal solid waste incineration (MSWI) bottom ash as precursor for alkali-activated materials: a critical review10.1016/j.resconrec.2024.107516 ↗
19. Microstructures and properties of alkali-activated slags with composite activator: effects of Na2O equivalents10.1016/j.jclepro.2024.141754 ↗
20. Chemical evaluation of immobilization of wastes containing pb, cd, cu and zn in alkali-activated materials: a critical review10.1016/j.jece.2020.104194 ↗
21. Solidification of municipal solid waste incineration Fly ash with alkali-activated technology10.1016/j.jenvman.2023.119404 ↗
22. Self-alkali-activated self-cementation achievement and mechanism exploration for the synergistic treatment of the municipal solid waste incineration Fly ashes and the arsenic-contaminated soils10.1016/j.chemosphere.2023.138397 ↗
23. Recycling E-waste CRT glass in sustainable geopolymer concrete for radiation shielding applications10.1016/j.jece.2024.114693 ↗
24. Data-driven intelligent modeling of unconfined compressive strength of heavy metal-contaminated soil
25. Sustainable stabilization/solidification of electroplating sludge using a low-carbon ternary cementitious binder
26. Evaluation of technical and gamma radiation shielding properties of sustainable ultra-high performance geopolymer concrete10.1016/j.conbuildmat.2024.137003 ↗
27. Study on the influence of nano-silica substitution of reactive si on the properties and hydration process of alkali-activated cementitious materials paste10.1016/j.conbuildmat.2024.137759 ↗
28. Mechanical performance and reaction mechanism of copper slag activated with sodium silicate or sodium hydroxide10.1016/j.conbuildmat.2020.120900 ↗
29. Philosophy of rational mixture proportioning of alkali-activated materials validated by the hydration kinetics of alkali-activated slag and its microstructure10.1016/j.cemconres.2023.107139 ↗
30. Fresh and hardened state properties, reaction kinetics and microstructure of sodium sulfate/sodium hydroxide – activated slag mixtures10.1016/j.conbuildmat.2023.132943 ↗
31. Effects of activator content on properties, mineralogy, hydration and microstructure of alkali-activated materials synthesized from calcium silicate slag and ground granulated blast furnace slag
32. Immobilization of cu (Ⅱ), ni (Ⅱ) and zn (Ⅱ) in silica fume blended portland cement: role of silica fume10.1016/j.conbuildmat.2022.127772 ↗
33. A continuous hydration model for cement paste with realistic CT image-based particles and simulation of microstructural evolution10.1016/j.cemconres.2024.107607 ↗
34. Prepared self-growth supported copper catalyst by recovering cu (II) from wastewater using geopolymer microspheres10.1016/j.jclepro.2020.122571 ↗
35. Binding of Cu(Ⅱ) and Zn(Ⅱ) in portland cement immobilization systems: effect of C-A-S-H composition10.1016/j.cemconcomp.2022.104602 ↗
36. Microstructure and radiation shielding properties of lead-fiber reinforced high-performance concrete10.1016/j.ceramint.2024.04.089 ↗
37. Effect of hybrid lead-PVA fibers on microstructure and radiation shielding properties of high-performance concrete
38. Effects of alkali equivalent and polypropylene fibres on performance of alkali-activated municipal waste incineration bottom ash-slag mortar
39. Clarifying and quantifying the immobilization capacity of cement pastes on heavy metals10.1016/j.cemconres.2022.106945 ↗
40. Multitudinous components recovery, heavy metals evolution and environmental impact of coal gasification slag: a review10.1016/j.chemosphere.2023.139473 ↗
41. Value-added recycling of cathode ray tube funnel glass into high-performance radiation shielding concrete10.1016/j.resconrec.2023.107252 ↗
42. Synergy between fenton reagent and solid waste-based solidifying agents during the solidification/stabilization of lead(II) and arsenic(III) contaminated soils10.1016/j.jenvman.2024.122601 ↗
43. The stabilization ability of NaA zeolite derived from Fly ash for lead and cadmium in soil: mechanisms and evaluation of effectiveness10.1016/j.scitotenv.2024.173834 ↗
44. Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation10.1016/j.cemconres.2022.106892 ↗
45. Mercury porosimetry: an inappropriate method for the measurement of pore size distributions in cement-based materials10.1016/S0008-8846(00)00370-7 ↗
46. Characterisation of products of tricalcium silicate hydration in the presence of heavy metals10.1016/j.jhazmat.2007.01.136 ↗
47. Alkali-activation of copper slag: characterization and mechanical properties of inorganic polymer binder10.1016/j.cej.2025.163615 ↗
48. Composition, nanostructure and stability of Cu-modified C-A-S-H in antibacterial alkali-activated slag10.1016/j.cemconres.2023.107256 ↗
49. Early hydration of C3S in the presence of Cd2+, Pb2+ and Cr3+ and the immobilization of heavy metals in pastes10.1016/j.conbuildmat.2017.07.026 ↗
50. Reaction mechanisms of one-part and two-part slag-based binders activated by sodium carbonate and lime10.1016/j.cemconcomp.2025.105992 ↗
51. Influence of ligands as chemical admixtures in the early hydration of sodium carbonate-activated blast furnace slag10.1016/j.conbuildmat.2024.135753 ↗
52. Characterization and properties of porous red mud–based geopolymer composites reinforced with carbon fiber powders10.1016/j.diamond.2024.111531 ↗
53. Hydration mechanism of alkali-activated cementitious materials entirely prepared by solid wastes
54. Mechanical properties and microstructure evolution of alkali-activated GGBS-Fly ash-steel slag ternary cements10.1016/j.conbuildmat.2024.137727 ↗
55. Epoxy resin for solidification/stabilization of soil contaminated with copper (II): leaching, mechanical, and microstructural characterization10.1016/j.envres.2023.117512 ↗
56. Quantifying the immobilization mechanisms of heavy metals by calcium silicate hydrate (C-S-H): the case of Cu2+10.1016/j.cemconres.2024.107695 ↗
57. Decomplexation of Cu(II)-EDTA by synergistic activation of persulfate with alkali and CuO: kinetics and activation mechanism10.1016/j.scitotenv.2021.152793 ↗
58. Stabilization of arsenic-cadmium co-contaminated soil with the iron-manganese sludge derived amendment: effects and mechanisms10.1016/j.jenvman.2024.122570 ↗
59. Effect of curing conditions on the alkali-activated blends: microstructure, performance and economic assessment10.1016/j.jclepro.2024.141344 ↗
60. Release of zn, ni, cu, SO42− and CrO42− as a function of ph from cement-based stabilized/solidified refinery oily sludge and ash from incineration of oily sludge10.1016/j.jhazmat.2006.07.034 ↗
61. Multiscale microstructure and micromechanical properties of alkali-activated concrete: a critical review10.1016/j.cemconcomp.2024.105664 ↗
62. Influences of silicate modulus and alkali content on macroscopic properties and microstructure of alkali-activated blast furnace slag-copper slag10.1016/j.conbuildmat.2024.137622 ↗
63. Effects of alkali dosage and silicate modulus on autogenous shrinkage of alkali-activated slag cement paste10.1016/j.cemconres.2020.106322 ↗
64. Volatilization characteristic and solidification of pb, zn, cd and as during cement kiln co-processing of solid waste10.1016/j.conbuildmat.2023.133410 ↗
65. Effect of large additions of cd, pb, cr, zn, to cement raw meal on the composition and the properties of the clinker and the cement10.1016/S0008-8846(96)85025-3 ↗
66. Effect and mechanism of nano-alumina on early hydration properties and heavy metals solidification/stabilization of alkali-activated MSWI Fly ash solidified body10.1016/j.jhazmat.2023.131327 ↗
67. Mechanical properties of calcium-silicate-hydrates (C-S-H) gel colloid at sub-micro scale by using molecular dynamics based cohesive zone representation of inter-globule interaction10.1016/j.conbuildmat.2023.134683 ↗
68. Kinetics of al uptake in synthetic calcium silicate hydrate (C-S-H)10.1016/j.cemconres.2023.107250 ↗
69. Performance and mechanism of mold-pressing alkali-activated material from MSWI Fly ash for its heavy metals solidification10.1016/j.wasman.2021.04.003 ↗
70. Remediation of artificially contaminated soil and groundwater with copper using hydroxyapatite/calcium silicate hydrate recovered from phosphorus-rich wastewater10.1016/j.envpol.2020.115978 ↗
71. Comparison of organic and synthetic amendments for poplar phytomanagement in copper and lead-contaminated calcareous soil10.1016/j.jenvman.2024.120553 ↗
72. Life cycle assessment of recycling copper slags as cement replacement material in mine backfill10.1016/j.resconrec.2024.107591 ↗
73. Study on the solidification/stabilization of Cu(II) and Cd(II)-contaminated soil by Fly ash-red mud based geopolymer10.1016/j.conbuildmat.2025.140515 ↗
74. Investigation on the behavior of Fly ash phosphate-based geopolymer stabilized acidic lead contaminated soil10.1016/j.jece.2024.114739 ↗
75. Efficacy of Fe-Mg-bimetallic biochar in stabilization of multiple heavy metals-contaminated soil and attenuation of toxicity in spinach (Spinacia oleracea L.)10.1016/j.chemosphere.2024.143184 ↗
76. Sustainable stabilization/solidification of cd and pb in industrially heavy metal-contaminated site soils using a novel binder incorporating bone meal and Fly ash10.1016/j.conbuildmat.2024.135162 ↗
77. Transforming restored heavy metal-contaminated soil into eco-friendly bricks: an insight into heavy metal stabilization and environmental safety10.1016/j.jenvman.2024.122821 ↗
78. New insights into the reaction mechanisms of calcium-based activators modified sodium carbonated activated slag: Precursor dissolution and carboaluminate generation10.1016/j.conbuildmat.2025.141817 ↗
79. Efficient recycling of high-volume Waste-to-Energy bottom ash for integration into ultra-high-performance geopolymer concrete10.1016/j.conbuildmat.2025.142020 ↗
80. A new approach for constructing UHPC conductive pathways: Oriented deposition of conductive hydration products10.1016/j.cemconres.2025.107827 ↗