Field erosion protection of tidal beach: Comparison and synergy between sulfide aluminum cementing materials and biomineralization materials
Source abstract
Abstract
The imbalance of sediment transport under the influence of the marine dynamic environment leads to the gradual erosion of the sandy beach. In this paper, a field verification to overcome the issue of coastal erosion affecting the sandy shoreline by two cementing materials, sulfide aluminum cementing materials (SAC) and biomineralization materials, was conducted on the Hainan island in China. Results showed that the treatment process of biomineralization materials and SAC materials determined the protective effect: using SAC materials mixing sand and backfilling first, then spraying biomineralization materials showed basically no protective effect, while spraying biomineralization materials to treat the bottom sand firstly and then using SAC materials mixing sand and backfilling showed excellent protective effect. Using CP, CPM3, M4C treatment methods increased the strength and integrity of tidal sand, thus played a certain role in preventing erosion. However, edge scour was an important issue that cannot be ignored in the application of coastal erosion protection. As a non-destructive rapid test indicator, the rebound strength showed a non-monotonic trend. Due to the degradation of the protective layer caused by erosion, immersion and scour of the tidal dynamic environment, the rebound strength first raised rapidly to a peak value and then gradually decreased. There were three types of cementation: biomineralization in deeper layer of tidal sand, SAC mixing sand and filling in the shallow layer within 10 cm, interface bonding between biomineralization layer and SAC mixing sand and filling layer.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microbial Applications in Construction Materials · Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Flume study on the effects of microbial induced calcite precipitation (MICP) on the erosional behaviour of fine sand
2. Concrete solutions: cement manufacturing is a major source of greenhouse gases. But cutting emissions means mastering one of the most complex materials known10.1038/494300a ↗
3. Bird, E.C. (1985). Coastline changes. A global review.
4. Cementation of sand soil by microbially induced calcite precipitation at various degrees of saturation10.1139/cgj-2012-0023 ↗
5. Biocementation of a well-graded gravelly soil and macromechanical characterization10.1061/JGGEFK.GTENG-12091 ↗
6. Industrially interesting approaches to “low-CO2” cements10.1016/j.cemconres.2004.01.021 ↗
7. Field implementation of microbially induced calcium carbonate precipitation for surface erosion reduction of a coastal plain sandy slope10.1061/(ASCE)GT.1943-5606.0002836 ↗
8. Field experimentation of bio-cementation using low-cost cementation media for preservation of slope surface
9. A global analysis of erosion of sandy beaches and sea-level rise: an application of DIVA10.1016/j.gloplacha.2013.09.002 ↗
10. Predicting concrete compressive strength using ultrasonic pulse velocity and rebound number
11. Feasibility study of native ureolytic bacteria for biocementation towards coastal erosion protection by MICP method10.3390/app9204462 ↗
12. JGJ/T 23-2011, 2011, Technical specification for inspecting of concrete compressive strength by rebound method, China.
13. The applicability of microbially induced calcite precipitation (MICP) for internal erosion control in gravel–sand mixtures10.1680/jgeot.15.P.182 ↗
14. Effect of MICP-recycled shredded coconut coir (RSC) reinforcement on the mechanical behavior of calcareous sand for coastal engineering10.1016/j.apor.2023.103564 ↗
15. Assessment of erosion resistance of biocemented sandy slope subjected to wave actions10.1016/j.apor.2020.102401 ↗
16. Factors affecting the effectiveness of biocementation of soil10.1016/j.bgtech.2024.100087 ↗
17. An innovative eco-friendly method for scour protection around monopile foundation10.1016/j.apor.2022.103177 ↗
18. Field implementation to resist coastal erosion of sandy slope by eco-friendly methods10.1016/j.coastaleng.2024.104489 ↗
19. The impact of microbially induced calcite precipitation (MICP) on sand internal erosion resistance: a microfluidic study10.1016/j.trgeo.2024.101404 ↗
20. Influence of rainfall-induced erosion on the stability of sandy slopes treated by MICP10.1155/2022/5105206 ↗
21. Adaptive measures adopted for risk reduction of coastal erosion in the People’s Republic of China10.1016/j.ocecoaman.2014.08.008 ↗
22. Optimizing microbial-and enzyme-induced carbonate precipitation treatment regimes to improve the performance of recycled aggregate concrete
23. Distribution and properties of microbially induced carbonate precipitation in underwater sand bed10.1061/(ASCE)GT.1943-5606.0002607 ↗
24. Investigation of corrosion inhibitory process of marine Vibrio neocaledonicus sp. bacterium for carbon steel10.1016/j.corsci.2015.07.030 ↗
25. Rebound hammer test to estimate compressive strength of heat exposed concrete10.1016/j.conbuildmat.2018.03.179 ↗
26. Enhancing the durability of coastal soil treated with fiber-reinforced microbial-induced calcite precipitation (MICP)10.1016/j.apor.2024.104106 ↗
27. Biomineralization to prevent microbially induced corrosion on concrete for sustainable marine infrastructure10.1021/acs.est.3c04680 ↗
28. Effects of cyclic seawater exposure on the mechanical performance and chloride penetration of calcium sulfoaluminate concrete10.1016/j.conbuildmat.2021.124139 ↗
29. Application of Schmidt rebound number for estimating rock strength under specific geological conditions
30. Statistical estimation of uniaxial compressive strength in geotechnical projects using regression analysis: a comparative study10.1061/IJGNAI.GMENG-9384 ↗
31. Sandy coastlines under threat of erosion10.1038/s41558-020-0697-0 ↗
32. Wang, L. (2020). Pore Solution Composition of Calcium Sulfoaluminate Cement Based Material and Its Effects on Steel Corrosion. Zhejiang University, Hangzhou.10.3390/app9061092 ↗
33. Mitigation of soil liquefaction using microbial technology: an overview10.1016/j.bgtech.2023.100005 ↗
34. The management of coastal erosion10.1016/j.ocecoaman.2017.03.022 ↗
35. Hydration of calcium sulfoaluminate cements—Experimental findings and thermodynamic modelling.10.1016/j.cemconres.2009.08.014 ↗
36. Erosion of biotreated field-scale slopes under rainfalls10.1061/(ASCE)CF.1943-5509.0001732 ↗
37. Mechanical properties and disintegration behavior of EICP-reinforced sea sand subjected to drying-wetting cycles10.1016/j.bgtech.2023.100019 ↗
38. Carbonation resistance of sulphoaluminate cement-based high performance concrete10.1007/s11595-009-4663-y ↗