Influence of processing methods on the strength activity index for sludge as a supplementary cementitious material
Source abstract
Abstract
Utilizing activated sludge as a partial substitute for cement can both curb cement consumption and address sludge reuse in an economically and environmentally-friendly manner. This study delves into the pozzolanic activity of mechanically-thermal (MT) activated sludge and alkali-mechanical-thermal (AMT) activated sludge, employing the strength activity index (SAI) method. Microscopic insights provided by X-ray diffraction (XRD), scanning electron microscopy (SEM), and laser particle size analysis aid in the interpretation of observed phenomena. The findings underscore the superiority of MT activation over AMT activation, with an SAI of 97 %. Optimal pozzolanic activity is achieved through a 2-hours holding time, slow heating at 10 °C/min, and rapid cooling. A calcination temperature of 800 °C effectively promotes the decomposition of active minerals and enhances the sludge's pozzolanic activity. Additionally, a ball milling time of 2 minutes proves sufficient to meet practical demands, as prolonged ball milling has a limited impact on sludge pozzolanic activity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Comparison of CO2 emissions from OPC and recycled cement production10.1016/j.conbuildmat.2019.03.289 ↗
2. Dynamic scenario analysis of CO2 emission in China’s cement industry by 2100 under the context of cutting overcapacity10.1007/s11027-022-10028-3 ↗
3. Deciphering the CO2 emissions and emission intensity of cement sector in China through decomposition analysis10.1016/j.jclepro.2022.131627 ↗
4. Emerging energy-efficiency and CO2 emission-reduction technologies for cement and concrete production: a technical review10.1016/j.rser.2012.07.019 ↗
5. Life-cycle environmental impact analysis of a typical cement production chain10.1016/j.apenergy.2015.09.003 ↗
6. Life cycle assessment of thermoactivated recycled cement production
7. Synergistic effects of fly ash and MgO expansive additive on cement paste: microstructure and performance br10.1016/j.conbuildmat.2023.130740 ↗
8. Replacement of raw mix in cement production by municipal solid waste incineration ash10.1016/S0008-8846(03)00206-0 ↗
9. Performance comparison of cement replacing materials in concrete: Limestone fillers and supplementary cementing materials – A review10.1016/j.conbuildmat.2020.118866 ↗
10. Synergistic enhancement of mechanical property of the high replacement low-calcium ultrafine fly ash blended cement paste by multiple chemical activators
11. Lime mud waste from the paper industry as a partial replacement of cement in mortars used on radiant floor heating systems
12. Effects of fly ash on MgO-based shrinkage-compensating cement: Microstructure and properties10.1016/j.conbuildmat.2022.127648 ↗
13. Hydration behavior and strength development of supersulfated cement prepared by calcined phosphogypsum and slaked lime
14. Role of mineral additions in reducing CO2 emission10.1016/j.cemconres.2004.04.028 ↗
15. Utilization of silt, sludge, and industrial waste residues in building materials: a review
16. Enzyme-induced carbonate precipitation (EICP) combined with lignin to solidify silt in the Yellow River flood area10.1016/j.conbuildmat.2022.127792 ↗
17. The utilization of lime-dried sludge as resource for producing cement10.1016/j.jclepro.2014.07.070 ↗
18. Recycling of dredged river silt reinforced by an eco-friendly technology as microbial induced calcium carbonate precipitation (MICP)10.1016/j.sandf.2022.101216 ↗
19. Research on the mechanical properties and microstructure of modified silt sediment geopolymer materials10.3390/gels8120792 ↗
20. Value-added utilization of marine clay as cement replacement for sustainable concrete production10.1016/j.jclepro.2018.07.068 ↗
21. New experimental approach of the reuse of dredged sediments in a cement matrix by physical and heat treatment10.1016/j.conbuildmat.2017.02.142 ↗
22. Effect of calcination pretreatment on mechanical properties of alkali-activated artificial stone incorporating Yellow River silt10.1016/j.jclepro.2022.132682 ↗
23. The particle-size effect of waste clay brick powder on its pozzolanic activity and properties of blended cement10.1016/j.jclepro.2019.118521 ↗
24. Organo-modified reservoir sludge as fine aggregates in cement mortars10.1016/j.conbuildmat.2005.12.009 ↗
25. Hydration mechanisms of sewage sludge ashes used as cement replacement10.1016/j.cemconres.2020.106115 ↗
26. Study of pozzolanic activity of bamboo stem ashes for use as partial replacement of cement10.1617/s11527-016-0958-6 ↗
27. Study on the pozzolanic activity of ultrafine circulating fluidized-bed fly ash prepared by jet mill10.1016/j.fuel.2021.120220 ↗
28. Mechanical activation of siliceous tailings and its application as cement admixtures10.1016/j.mineng.2021.107366 ↗
29. Chemical activation of slag-blended Portland cement10.1016/j.jobe.2018.03.004 ↗
30. Mechanical activation of lead–zinc mine tailings as a substitution for cement in concrete construction10.1016/j.conbuildmat.2022.129973 ↗
31. Mechanical, chemical and hydrothermal activation for waste glass reinforced cement10.1016/j.conbuildmat.2021.124361 ↗
32. Assessment of pozzolanic activity of different calcined clays10.1016/j.cemconcomp.2013.01.002 ↗
33. Assessment of pozzolanic activity of calcined coal-series kaolin10.1016/j.clay.2017.03.038 ↗
34. Influence of calcination and cooling conditions on pozzolanic reactivity of paper mill sludge10.1016/j.conbuildmat.2018.01.119 ↗
35. Utilization of acid-washed sewage sludge ash as sand or cement replacement in concrete10.1016/j.resconrec.2021.105943 ↗
36. Effect of alkali and sulfate on the hydration characteristic of cement-based materials containing coal gasification slag
37. Thermal treatment of dredged sediment in a rotary kiln: investigation of structural changes10.1021/ie203023k ↗
38. Effect of pozzolanic reaction of zeolite on its internal curing performance in cement-based materials
39. Pozzolanic activity and hydration properties of feldspar after mechanical activation10.1016/j.powtec.2021.01.042 ↗