Investigation of the influence of the addition of graphene oxide nanoparticles in mortars made with the addition of silica fume, marble powder and fibers from the crushing of the N95 face masks
Source abstract
Abstract
The potential for reusing different waste in building material manufacture has been extensively explored in recent years, reducing their disposal and the natural resources consumption. The main objective of this research is to investigate the advantage of adding graphene oxide nanoparticles (GON) to a mortar made with Portland cement, sand, silica fume, marble powder, and the addition of polymeric fibers (obtained through crushing of the N-95 facial protection mask (FM)). The experimental program added 0%, 0.7%, 1.4%, 2.0% FM, and 0.02% GON (both about the cement weight) in the mortars, which were investigated for their physical, mechanical, and chemical properties. The results indicate the possibility of 0.7% FM since it has GON addition. Finally, the GON addition in mortars will allow the addition of other types of recycled polymeric fibers.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Building materials and conservation · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Analysis of the dynamic relationship between construction industry development and environmental pollution in liaoning province based on VAR modeling
2. Solid waste management in emerging economies: opportunities and challenges for reuse and recycling
3. A critical literature review on reuse and recycling of construction waste in the construction industry
4. C.N.N. BRASIL. (2021). Pandemia: mais de 12 bilhões de máscaras já foram descartadas no Brasil, Jul. https://www.cnnbrasil.com.br/saude/pandemia-mais-de-12-bilhoes-de-mascaras-ja-foram-descartadas- no-brasil/, acessado em novembro de 2021.
5. Improper solid waste management increases potential for COVID-19 spread in developing countries
6. Research of the addition of N95 facial mask fiber, silica fume, and marble powder in high-performance mortar
7. Impact of nano-silica on the hydration, strength, durability, and microstructural properties of concrete: a state-of-the-art review
8. Study on strength and durability characteristics of nano-silica-based blended concrete
9. Enhancing concrete properties using silica fume: optimized mix design
10. Effect of nano-silica on the fresh and mechanical properties of conventional concrete10.1016/j.finmec.2022.100165 ↗
11. Marble residues in construction materials: a review of the marble dust in mortars, concrete, and bricks10.21041/ra.v12i2.522 ↗
12. Effect of waste marble powder on the properties of concrete
13. Effect on properties of concrete by utilization of metakaolin and marble powder
14. Determination of properties and environment due to the usage of fly ash and marble waste powder in concrete
15. Investigation of waste marble powder in the development of sustainable concrete
16. Use of marble slurry powder and fly ash to obtain sustainable concrete
17. Effect of mineral additions on the mechanical behavior of polymer concretes
18. Comparative study of the effect of silica nanoparticles and polystyrene on the properties of concrete
19. The Influence of polypropylene fiber and silica fume on the mechanical properties of no-fine concrete with recycled aggregate10.1051/e3sconf/202342702002 ↗
20. Using fiber recovered from face mask waste to improve printability in 3D concrete printing10.1016/j.cemconcomp.2023.105047 ↗
21. Effective recycling of disposable medical face masks for sustainable green concrete via a new fiber hybridization technique10.1016/j.conbuildmat.2022.128245 ↗
22. Repurposing of COVID-19 single-use face masks for pavements base/ subbase10.1016/j.scitotenv.2021.145527 ↗
23. Determination and review of physical and mechanical properties of raw and treated coconut fibers for their recycling in construction materials10.3390/fib8060037 ↗
24. A comprehensive review on the use of natural fibers in cement/geopolymer concrete: a step towards sustainability
25. Pre-treated corn straw fiber for fiber-reinforced concrete preparation with high resistance to chloride ions corrosion
26. Graphene oxide as a nanomaterial in developing sustainable concrete - a brief review
27. Graphene-based concrete: Synthesis strategies and reinforcement mechanisms in graphene-based cementitious composites (Part1))10.1016/j.conbuildmat.2023.133047 ↗
28. Effect of nanomaterials (carbon nanotubes, nano-silica, graphene oxide) on bond behavior between concrete and reinforcing bars
29. Effect of graphene oxide on microstructure and micromechanical property of ultra-high-performance concrete10.1016/j.cemconcomp.2023.104964 ↗
30. For the improvement of mechanical and microstructural properties of UHPC with fiber alignment using carbon nanotube and graphite nanoplatelet
31. Review on effect of graphene oxide reinforcement on properties of cement concrete
32. Influence of Graphene oxide on abrasion resistance and strength of concrete10.1016/j.conbuildmat.2023.133280 ↗
33. Study on the effect of steel and glass fibers on fresh and hardened properties of vibrated concrete and self-compacting concrete
34. Multi-recycling of polypropylene fiber reinforced concrete: Influence of recycled aggregate properties on new concrete10.1016/j.conbuildmat.2022.128458 ↗
35. Comparison of mechanical properties of concrete and design thickness of pavement with different types of fiber reinforcements (steel, glass, and polypropylene)
36. Brazilian standard (ABNT). (2018). NBR 16697: Portland cement - Requirements.
37. Brazilian standard (ABNT). (2015). NBR 7214: Sand for cement testing - Specifications.
38. N95 respirator cleaning and reuse methods proposed by the inventor of the N95 mask material10.1016/j.jemermed.2020.04.036 ↗
39. An environmentally friendly solution for waste facial masks recycled in construction materials10.3390/su14148739 ↗
40. A review of mixture design methods for self-compacting concrete10.1016/j.conbuildmat.2015.03.079 ↗
41. Mixture design for self-compacting concrete using a virtual particle packing method10.34117/bjdv7n5-415 ↗
42. Effect of graphene oxide nanosheets of microstructure and mechanical properties of cement composites10.1016/j.conbuildmat.2013.08.022 ↗
43. Effect of graphene oxide on the rheological properties of cement pastes10.1016/j.conbuildmat.2015.07.181 ↗
44. Effect of graphene oxide on mechanical properties of recycled mortar10.1088/1757-899X/274/1/012144 ↗
45. Brazilian standard (ABNT). (1994). NBR 9479: Curing mortar and concrete specimens.
46. Brazilian standard (ABNT). (2016). NBR 13276: Mortar: a test of the consistency index.
47. Brazilian standard (ABNT). (2019). NBR 7215: Cement Portland – Determination of Compressive Strength.
48. Brazilian standard (ABNT). (2011). NBR 7222: Cement Portland – Determination of diametric tensile strength.
49. Brazilian standard (ABNT). (2019). NBR 16616: Determination of speed pulse ultrasonic.
50. Brazilian standard (ABNT). (2009). NBR 9778: Mortar and Concrete – Determination of Water Absorption of Immersion.
51. Brazilian standard (ABNT). (2009). NBR 9779: Mortar and Concrete – Determination of Capillary Absorption.
52. Revealing the dependence of the physiochemical and mechanical properties of cement composites on graphene oxide concentration10.1039/C7RA10066C ↗
53. Dynamic mechanical properties, and microstructure of graphene oxide nanosheets reinforced cement composites10.3390/nano7120407 ↗
54. Incorporation of graphene oxide in coating mortar: a sustainable view10.1590/s1678-86212020000100375 ↗
55. Study on the effect of graphene oxide with low oxygen content on Portland cement-based composites10.3390/ma12050802 ↗
56. Mechanical properties of mortar and concrete incorporated with concentrated graphene oxide, functionalized carbon nanotube, nano silica hybrid aqueous solution
57. Experimental study on sound and damage mortar: variation of ultrasonic parameters with porosity10.1016/j.conbuildmat.2008.05.012 ↗
58. Micro-Raman spectroscopy in white Portland cement hydration: long-term study at room temperature10.1002/jrs.1428 ↗
59. Characterization of principal clinker minerals by FT-Raman microspectroscopy10.1016/0008-8846(94)90016-7 ↗
60. The influence of lithium fluoride on in vitro biocompatibility and bioactivity of calcium aluminate–PMMA composite cement
61. Investigation of the sustainable additive influence, obtained from milk protein, in the chemical and 60 physical properties of Portland cement
62. Utilization of dairy waste as a release agent and plasticizer for civil construction10.1080/19397038.2021.1966124 ↗
63. Raman spectroscopy of C-S-H, tobermorite, and jennite10.1016/S1065-7355(97)00001-1 ↗