Synergistic effects of ground granulated blast furnace slag and circulating fluidized bed fly ash in lime-activated cementitious materials
Source abstract
Abstract
Alkali-activated materials prepared from industrial solid wastes have excellent performance, advancing the cement industry towards achieving the Net-zero emissions goal. However, the diverse synergistic effects of various solid waste types necessitate further investigation. In this study, the effect of different content (20 %, 30 %, 40 %, and 50 %) of ground granulated blast furnace slag (GGBFS) on the mechanical performance of circulating fluidized bed fly ash (CFBFA)-GGBFS-lime ternary cementitious materials (CGL) was investigated. The synergistic mechanism of GGBFS and CFBFA was elucidated through analyses of hydration heat, XRD, FT-IR, and SEM-EDS tests. The results indicated that GGBFS facilitated sulfate consumption during the early hydration stage, promoting the dissolution of CFBFA. This, in turn, enhanced the availability of sulfate, calcium, and active silicon-aluminum phases for CGL hydration, ultimately leading to an improvement in their overall hydration degree. Conclusively, the optimal synergistic effect between CFBFA and GGBFS was observed at a GGBFS content of 40 %, with a compressive strength of 32.84 MPa at 28 days. However, excessive GGBFS content (50 %) could lead to the premature formation of a “hydration barrier membrane”, negatively affecting the sustained hydration of CGL. This work presented an eco-friendly approach to the resource utilization of CFBFA, particularly in terms of mineral resource consumption, and held promising prospects for applications in projects.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. CO2 Emissions in 2022. Paris: International Energy Agency, 2023.
2. A review on buildings energy information: trends, end-uses, fuels and drivers10.1016/j.egyr.2021.11.280 ↗
3. Techno-economic evaluation of indirect carbonation for CO2 emissions capture in cement industry: a system dynamics approach10.1016/j.jclepro.2020.121457 ↗
4. CO2 pretreatment to aerated concrete with high-volume industry wastes enables a sustainable precast concrete industry10.1021/acssuschemeng.1c00001 ↗
5. A preliminary study of the properties of potassium phosphate magnesium cement-based grouts admixed with metakaolin, sodium silicate and bentonite
6. Properties of cement mortar incorporated high volume fraction of GGBFS and CKD from 1 day to 550 days
7. Relationship between fractal feature and compressive strength of fly ash-cement composite cementitious materials10.1016/j.cemconcomp.2023.105052 ↗
8. Properties of reactive powder concrete containing different combinations of fly ash and metakaolin
9. Geopolymers and geopolymeric materials10.1007/BF01904446 ↗
10. Mechanical properties and microstructure of red mud-coal metakaolin geopolymer concrete based on orthogonal tests
11. Deterioration of ambient-cured and heat-cured fly ash geopolymer concrete by high temperature exposure and prediction of its residual compressive strength10.1016/j.conbuildmat.2020.120924 ↗
12. Synthesis and Characterization of Geopolymer from Bayer Red Mud with Thermal Pretreatment10.1111/jace.12840 ↗
13. Greenhouse gas emissions of different fly ash based geopolymer concretes in building construction10.1016/j.jclepro.2018.08.311 ↗
14. Life cycle assessment and cost analysis of fly ash–rice husk ash blended alkali-activated concrete10.1016/j.jenvman.2021.113140 ↗
15. Hydrated lime activation on byproducts for eco-friendly production of structural mortars10.1016/j.jclepro.2019.05.313 ↗
16. CO2 emissions from China’s lime industry10.1016/j.apenergy.2015.04.091 ↗
17. Parameters affecting the properties and microstructure of quicklime (CaO)—Activated slag cement pastes10.1016/j.cemconcomp.2019.05.002 ↗
18. Experimental study on the performance of lime-based low carbon cementitious materials10.1016/j.conbuildmat.2018.02.156 ↗
19. Influence of four additional activators on hydrated-lime [Ca(OH) 2] activated ground granulated blast-furnace slag10.1016/j.cemconcomp.2015.10.007 ↗
20. Mechanical properties, drying and autogenous shrinkage of blast furnace slag activated with hydrated lime and gypsum10.1016/j.cemconcomp.2010.01.004 ↗
21. Waste-to-resource strategies for the use of circulating fluidized bed fly ash in construction materials: a mini review10.1016/j.powtec.2021.08.035 ↗
22. Utilization of fly ash blends from pulverized coal and fluidized bed combustions in geopolymeric materials10.1016/j.cemconcomp.2010.09.017 ↗
23. Utilization of fly ash coming from a CFBC boiler co-firing coal and petroleum coke in Portland cement10.1016/j.fuel.2007.02.018 ↗
24. Study on the utilization of FBC ashes as cement admixture
25. Partial replacement of portland-composite cement by fluidized bed combustion fly ash10.1061/(ASCE)MT.1943-5533.0001899 ↗
26. Investigation on physical properties, strength and phase evolution of binary cementitious materials made of CFBC ash and lime
27. Circulating fluidized bed fly ash-blast furnace slag based cementitious materials: hydration behaviors and performance10.1016/j.conbuildmat.2022.128006 ↗
28. Mechanical properties and hydration behaviour of circulating fluidised bed fly ash- ground granulated blast furnace slag-lime ecofriendly cementitious material10.1016/j.conbuildmat.2023.133964 ↗
29. Effect of lime on the physical, mechanical, and hydration properties of circulating fluidized bed fly ash-blast furnace slag-based cementitious materials
30. The early hydration of Ordinary Portland Cement (OPC): an approach comparing measured heat flow with calculated heat flow from QXRD10.1016/j.cemconres.2011.09.001 ↗
31. Effect of mechanical grinding on physical and chemical characteristics of circulating fluidized bed fly ash from coal gangue power plant10.1016/j.conbuildmat.2015.10.144 ↗
32. Novel extraction of valuable metals from circulating fluidized bed-derived high-alumina fly ash by acid–alkali–based alternate method10.1016/j.jclepro.2019.05.113 ↗
33. An experimental argument for the existence of a protective membrane surrounding portland cement during the induction period10.1016/0008-8846(79)90048-6 ↗
34. Phase evolution of hybrid alkali sulfate-activated ground-granulated blast furnace slag cements10.1021/acssuschemeng.3c05937 ↗
35. The Rietveld method10.1088/0031-8949/89/9/098002 ↗
36. Quantitative phase analysis of hydraulic limes using the Rietveld method10.1016/j.cemconres.2005.02.001 ↗
37. Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer10.1016/j.cemconcomp.2023.104999 ↗
38. Effects of drying techniques on the crystal structure and morphology of ettringite10.1016/j.conbuildmat.2018.11.078 ↗
39. Stability and decomposition mechanism of ettringite in presence of ammonium sulfate solution10.1016/j.conbuildmat.2016.07.135 ↗
40. Layered double hydroxide-like materials: nanocomposites for use in concrete10.1016/j.cemconres.2004.05.012 ↗
41. Effect of Ca/Si and Al/Si on micromechanical properties of C(-A)-S-H10.1016/j.cemconres.2022.106811 ↗
42. Effects of sodium sulfate on the hydration and properties of lime-based low carbon cementitious materials10.1016/j.jclepro.2019.02.186 ↗
43. Morphology-structural change of C-A-S-H gel in blended cements10.1016/j.cemconres.2023.107156 ↗
44. Environmental and economic impacts assessment of concrete pavement brick and permeable brick production process—A case study in China10.1016/j.jclepro.2017.10.037 ↗
45. Low-carbon enhancement of fly ash geopolymer concrete: Lateral deformation, microstructure evolution and environmental impact10.1016/j.jclepro.2023.138610 ↗
46. Properties and durability of concrete containing fluidized bed combustion (FBC) fly ash10.1016/j.conbuildmat.2020.119663 ↗
47. Synthesis and characterization of geopolymer prepared from circulating fluidized bed-derived fly ash10.1016/j.ceramint.2022.01.052 ↗