Characteristics on compressive strength and microstructure of high-strength cementitious composites with waste glass beads
Source abstract
Abstract
This study investigated the potential of waste glass beads (WGB), a recycled porous lightweight material derived from waste glass, to enhance long-term curing of moisture-saturated cementitious construction materials. The macroscopic properties and microstructure development of a cement composite material blended with two types of WGB––spherical (B) and crushed (CB)––were analyzed. The primary objective was to provide practical guidelines for optimizing WGB utilization as a moisture release medium and thus contribute to sustainable concrete production by exploring waste glass applications. This study demonstrated the potential of WGB for improving strength and void structure and could help enhance the long-term durability of cement composites. Valuable insights were gained regarding the surface roughness and specific surface areas alongside curing methods to maximize WGB's effectiveness. The key contributions are as follows: (1) varying effects on high-strength concrete (HSC) strength with increased WGB content and surface roughness and specific surface areas were analyzed; (2) a proportional relationship between closed pore volume and modulus affecting macroscopic properties was revealed; (3) insights into hydration product presence in the ITZ and its relationship with WGB moisture content were gained; and (4) notable improvements in indentation tests for specimens with WGB were achieved, indicating enhanced ITZ hydration and increased density within both ITZ and paste.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. B. Department, Code of practice for structural use of concrete, (2004).
2. Properties of ultra-high performance fiber concrete (UHPFC) under different curing regimes
3. P. Klieger, Early high-strength concrete for prestressing, 1969.
4. Protected paste volume in concrete: extension to internal curing using saturated lightweight fine aggregate10.1016/S0008-8846(99)00178-7 ↗
5. Effect of internal curing with super absorbent polymers on residual stress development and stress relaxation in restrained concrete ring specimens10.1016/j.conbuildmat.2016.05.048 ↗
6. Application of internal curing for mixtures containing high volumes of fly ash10.1016/j.cemconcomp.2012.06.008 ↗
7. Towards a fundamental evaluation of water retention tests for curing compounds10.1007/BF02483144 ↗
8. Effect of curing conditions on strength, porosity, absorptivity, ans shrinkage of concrete in hot and dry climate10.1016/0008-8846(94)90124-4 ↗
9. Techniques and materials for internal water curing of concrete10.1617/s11527-006-9136-6 ↗
10. Water-entrained cement-based materials: I. Principles and theoretical background10.1016/S0008-8846(01)00463-X ↗
11. Potential use of lightweight aggregate (LWA) produced from bottom coal ash for internal curing of concrete systems10.1016/j.cemconcomp.2019.103428 ↗
12. Performance of internal curing materials in high-performance concrete: a review10.1016/j.conbuildmat.2021.125250 ↗
13. Influence of cement paste matrix properties on the autogenous curing of high-performance concrete10.1016/S0958-9465(03)00082-9 ↗
14. Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures10.1016/j.cemconcomp.2011.07.006 ↗
15. Influence of internal curing on the pore size distribution of high strength concrete10.1016/j.conbuildmat.2018.10.130 ↗
16. Lechugilla natural fiber as internal curing agent in self compacting concrete (SCC): mechanical properties shrinkage and durability10.1016/j.cemconcomp.2020.103686 ↗
17. Preparation, characterization and hydration-retarding mechanism of a new type of highly alkali-resistant superabsorbent polymer for sustainable concrete structures10.1016/j.conbuildmat.2022.130263 ↗
18. Internal curing by superabsorbent polymers in ultra-high performance concrete10.1016/j.cemconres.2015.05.005 ↗
19. Development of ultra-fine SAP powder for lower-shrinkage and higher-strength cement pastes made with ultra-low water-to-binder ratio10.1016/j.compositesb.2023.110810 ↗
20. Use of waste marble aggregates in concrete10.1016/j.conbuildmat.2010.09.037 ↗
21. Use of selected waste materials in concrete mixes10.1016/j.wasman.2006.07.026 ↗
22. Effects of pretreated fine lightweight aggregate on shrinkage and pore structure of ultra-high strength concrete10.1016/j.conbuildmat.2019.01.205 ↗
23. Production of lightweight aggregates from bauxite tailings for the internal curing of high-strength mortars10.1016/j.conbuildmat.2022.127800 ↗
24. Use of bauxite tailing for the production of fine lightweight aggregates10.1016/j.jclepro.2022.133603 ↗
25. Use of porous ceramic waste aggregates for internal curing of high-performance concrete10.1016/j.cemconres.2009.01.007 ↗
26. Microporous structures and compressive strength of high-performance rubber concrete with internal curing agent10.1016/j.conbuildmat.2019.04.184 ↗
27. Use of recycled fine clay brick aggregate as internal curing agent for low water to cement ratio mortar10.1016/j.conbuildmat.2020.120280 ↗
28. The effect of expansive agent and cooling rate in the performance of expanded glass lightweight aggregate as an internal curing agent10.1016/j.conbuildmat.2020.121505 ↗
29. Improving the effectiveness of internal curing through engineering the pore structure of lightweight aggregates10.1016/j.cemconcomp.2022.104773 ↗
30. Effects of recycled ceramic aggregates on internal curing of high performance concrete10.1016/j.conbuildmat.2022.126484 ↗
31. internal curing effect of waste glass beads on high-strength cement composites10.3390/app12168385 ↗
32. Packing density measurement and modelling of fine aggregate and mortar10.1016/j.cemconcomp.2009.03.006 ↗
33. Preparation of spherical foamed body with function of media for waste water treatment by using waste LCD glass10.1016/j.jiec.2013.11.048 ↗
34. Benefits of using blended waste coarse lightweight aggregates in structural lightweight aggregate concrete10.1016/j.jclepro.2016.01.071 ↗
35. Standard · 2021
36. High strength concrete and mortars in high temperature environments10.1557/PROC-42-295 ↗
37. Effect of high-temperature on the mechanical and durability behaviour of concrete10.1016/j.matpr.2020.11.153 ↗
38. Standard · 2020
39. Application of X-ray computed tomography to characterise the early hydration of calcium aluminate cement10.1016/S0958-9465(01)00063-4 ↗
40. Dimensional quantification of embedded voids or objects in three dimensions using X-ray tomography10.1017/S1431927611012554 ↗
41. Correlation between low-order probability distribution functions and percolation of porous concrete10.1680/macr.12.00125 ↗
42. X-ray CT imaging and finite element computations of the elastic properties of a rigid organic foam compared to experimental measurements: insights into foam variability10.1007/s10853-015-8958-4 ↗
43. Overview of the use of micro-computed tomography (micro-CT) to investigate the relation between the material characteristics and properties of cement-based materials10.1016/j.conbuildmat.2019.116843 ↗
44. X-ray microtomography: application to microstructure analysis of a cementitious material during leaching process10.1016/j.cemconres.2005.04.008 ↗
45. Use of raw rice husk as natural aggregate in a lightweight insulating concrete: an innovative application10.1016/j.conbuildmat.2014.07.025 ↗
46. Oil-palm by-products as lightweight aggregate in concrete mixture: a review10.1016/j.jclepro.2016.03.100 ↗
47. Mechanical, thermal and acoustical characterizations of an insulation composite made of bio-based materials10.1016/j.scs.2015.09.004 ↗
48. Evaluation of effect of glass beads on thermal conductivity of insulating concrete using micro CT images and probability functions10.1016/j.cemconcomp.2015.10.011 ↗
49. Area of lineal-path function for describing the pore microstructures of cement paste and their relations to the mechanical properties simulated from $μ$-CT microstructures10.1016/j.cemconcomp.2018.02.008 ↗
50. Microstructure characterization of cement paste from micro-CT and correlations with mechanical properties evaluated from virtual and real experiments10.1016/j.matchar.2019.109807 ↗
51. Pore structure of cement/pozzolan composites by X-ray microtomography10.1016/j.cemconres.2004.04.022 ↗
52. Effect of gel--space ratio and microstructure on strength of hydrating cementitious materials: an engineering micromechanics approach10.1016/j.cemconres.2012.10.019 ↗
53. Taylor · 1997
54. Microstructure-based micromechanical prediction of elastic properties in hydrating cement paste10.1016/j.cemconres.2006.05.014 ↗
55. Micro-and nano-X-ray computed-tomography: a step forward in the characterization of the pore network of a leached cement paste10.1016/j.cemconres.2014.08.007 ↗
56. Gradient-based phase segmentation method for characterization of hydrating cement paste microstructures obtained from X-ray micro-CT
57. Combined experimental and numerical study of fracture behaviour of cement paste at the microlevel10.1016/j.cemconres.2015.03.008 ↗
58. Microscale testing and modelling of cement paste as basis for multi-scale modelling10.3390/ma9110907 ↗
59. 3D experimental investigation of the microstructure of cement pastes using synchrotron X-ray microtomography (μCT)10.1016/j.cemconres.2006.10.012 ↗
60. Determination of the size of the representative volume element for random composites: statistical and numerical approach10.1016/S0020-7683(03)00143-4 ↗
61. Mechanical behavior comparison of single and multiple phase models for cement paste using micro-CT images and nanoindentation10.1016/j.conbuildmat.2022.127938 ↗
62. Influence of aggregate surface roughness on mechanical properties of interface and concrete10.1016/j.conbuildmat.2014.04.131 ↗
63. Mechanical properties, durability, and ITZ characteristics of full-grade dam concrete prepared by aggregates with surface rust stains10.1016/j.conbuildmat.2021.124798 ↗
64. Nanogranular packing of C--S--H at substochiometric conditions10.1016/j.cemconres.2009.09.017 ↗
65. Approximate strength of lightweight aggregate using micromechanics method10.1016/S1065-7355(98)00002-9 ↗
66. Analytical model for compressive strength, elastic modulus and peak strain of structural lightweight aggregate concrete10.1016/j.conbuildmat.2012.06.034 ↗
67. Mechanical properties of polymer-modified lightweight aggregate concrete10.1016/S0008-8846(01)00678-0 ↗
68. Influence of superabsorbent polymers on the surrounding cement paste10.1016/j.cemconres.2015.12.004 ↗
69. Materials, structure, and construction of a low-shrinkage UHPC overlay on concrete bridge deck10.1016/j.conbuildmat.2023.133353 ↗
70. Hydration and multiscale pore structure characterization of steam-cured cement paste investigated by X-ray CT10.1016/j.conbuildmat.2021.122629 ↗
71. Challenges on pumping infra-lightweight concrete based on highly porous aggregates
72. Bond strength of polymer lightweight aggregate concrete10.1002/pc.22621 ↗
73. Preparation of corundum-mullite refractories with lightweight, high strength and high thermal shock resistance10.1016/j.mtla.2019.100517 ↗
74. Thermal and mechanical properties of structural lightweight concrete containing lightweight aggregates and fly-ash cenospheres10.1016/j.conbuildmat.2018.11.074 ↗
75. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗
76. Microstructural analysis of interfacial transition zone (ITZ) and its impact on the compressive strength of lightweight concretes10.1016/j.conbuildmat.2017.01.101 ↗
77. A study on ITZ percolation threshold of air-entrained mortar: numerical simulation and analytical model10.1016/j.conbuildmat.2022.126358 ↗
78. Effect of fine aggregate size on the overlapping of interfacial transition zone (ITZ) in mortars10.1016/j.conbuildmat.2020.118559 ↗
79. Experimental study of the relationship between bond strength of aggerates interface and microhardness of ITZ in concrete10.1016/j.conbuildmat.2022.128990 ↗
80. Neville · 1995
81. Behavior of composite cement pastes containing microsilica and fly ash at elevated temperature10.1016/j.conbuildmat.2012.09.069 ↗
82. Effect of temperature on physical and mechanical properties of concrete containing silica fume10.1016/S0008-8846(96)85002-2 ↗
83. Impact of silica fume, fly ash, and metakaolin on the thickness and strength of the ITZ in concrete10.1016/j.cemconcomp.2019.05.012 ↗
84. Quantitative characterization of the interfacial transition zone around lightweight and normal aggregates in cement mortars at different water-to-binder ratios10.1016/j.conbuildmat.2023.132584 ↗
85. Effect of coarse aggregate size and matrix quality on ITZ and failure behavior of concrete under uniaxial compression10.1016/S0958-9465(03)00092-1 ↗
86. A contribution to the problem of cement-aggregate bond10.1016/0008-8846(85)90146-2 ↗
87. Aggregate-cement paste interface: part I. Influence of aggregate geochemistry10.1016/S0008-8846(99)00086-1 ↗
88. Interfacial transition zone in cementitious materials10.1016/S0008-8846(00)00210-6 ↗
89. Assessing the ITZ microcracking via scanning electron microscope and its effect on the failure behavior of concrete10.1016/j.cemconres.2004.05.042 ↗
90. Toughening cement-based materials through the control of interfacial bonding10.1016/S0008-8846(01)00500-2 ↗
91. The effect of the bond between the matrix and the aggregates on the cracking mechanism and fracture parameters of concrete10.1016/S0008-8846(02)00902-X ↗
92. K. Mitsui, Z. Li, D.A. Lange, S.P. Shah, Relationship between microstructure and mechanical properties of paste-aggregate interface, ACI Mater. J. 91 (n.d.). https://doi.org/10.14359/4447.10.14359/4447 ↗
93. The effects of bond strengths between lightweight and ordinary aggregate-mortar, aggregate-cement paste on the mechanical properties of concrete10.1016/S0921-5093(03)00595-1 ↗
94. A micromechanical model of tension-softening and bridging toughening of short random fiber reinforced brittle matrix composites10.1016/0022-5096(91)90043-N ↗
95. A review of the work of the RILEM TC 159-ETC: engineering of the interfacial transition zone in cementitious composites10.1007/BF02484160 ↗
96. Impact of surface plasma treatment on the performance of PET fiber reinforcement in cementitious composites10.1016/j.cemconres.2016.08.018 ↗
97. Mechanical properties of lime-based mortars reinforced with plasma treated glass fibers10.1016/j.conbuildmat.2018.09.175 ↗
98. Identification of microstructural characteristics in lightweight aggregate concretes by micromechanical modelling including the interfacial transition zone (ITZ)10.1016/j.cemconres.2010.07.001 ↗
99. Effect of iron tailings as fine aggregate and mineral admixture on strength and microstructure of cement mortar10.1186/s40069-023-00584-6 ↗
100. Compressive strength and microstructure of sugar cane bagasse ash concrete10.19026/rjaset.7.569 ↗