Beam tests for the determination of the interfacial properties of FRCM composites
Source abstract
Abstract
Fiber Reinforced Cementitious Matrix (FRCM) materials are widely used for strengthening reinforced concrete (RC) structures. Experimental studies show that the collapse of RC elements reinforced with FRCM composites occurs due to the loss of bond of the reinforcing material. For this reason the issue of the shear stress transfer between reinforcement and concrete substrate has been extensively studied in the last years. The single-lap shear test is the most frequently adopted test configuration. In this paper the results of bond tests between a FRCM composite and concrete performed in the beam test configuration are presented. The results are used to determine the cohesive material law (CML) of the tested composite and the obtained CML is compared with that obtained on the basis of the results of single-lap shear tests. The comparison shows that the two test configurations provide similar CML.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Masonry and Concrete Structural Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. DT 200, Italian National Research Council (CNR), Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Existing Structures, CNR - Rome, Italy, 2004.
2. ACI Committee 440.1R-15, Guide for the Design and Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer (FRP) Bars, ACI 440.1R-15, Farmington Hill, US, 2015.
3. DT 215, Italian National Research Council (CNR), Guide for the Design and Construction of Externally Bonded Fibre Reinforced Inorganic Matrix Systems for Strengthening Existing Structures, CNR - Rome, Italy, 2020.
4. ACI Committee 549, Guide to Design and Construction of Externally Bonded Fabric-reinforced Cementitious Matrix (FRCM) Systems for Repair and Strengthening Concrete and Masonry Structures, ACI 549.4R-13, Farmington Hill, US, 2013.
5. Performance of RC slab-type elements strengthened with fabric-reinforced cementitious-matrix composites10.1061/(ASCE)CC.1943-5614.0000415 ↗
6. Flexural strengthening of RC beams with an externally bonded fabric-reinforced cementitious matrix10.1061/(ASCE)CC.1943-5614.0000473 ↗
7. Experimental comparison of reinforced concrete beams strengthened against bending with different types of cementitious-matrix composite materials10.1016/j.conbuildmat.2017.01.106 ↗
8. Flexural behaviour of RC members strengthened with FRCM: state-of-the-art and predictive formulas10.1016/j.compositesb.2018.04.051 ↗
9. Structural performances of reinforced concrete beams strengthened in shear with a cement based fiber composite material10.1016/j.compstruct.2014.11.059 ↗
10. Flexural strengthening of RC beams with cement-based composites10.1061/(ASCE)CC.1943-5614.0000218 ↗
11. Textile-reinforced mortar (TRM) versus fiber-reinforced polymers (FRP) in shear strengthening of concrete beams10.1016/j.compositesb.2015.03.055 ↗
12. On the design of shear-strengthened RC members through the use of textile reinforced mortar overlays10.1016/j.compositesb.2018.04.008 ↗
13. Relationship between the effective strain of PBO FRCM-strengthened RC beams and the debonding strain of direct shear tests
14. Consiglio Superiore dei Lavori Pubblici - Servizio Tecnico Centrale, Linea Guida per la identificazione, la qualificazione ed il controllo di accettazione di compositi fibrorinforzati a matrice inorganica (FRCM) da utilizzarsi per il consolidamento strutturale di costruzioni esistenti, Consiglio Superiore dei Lavori Pubblici - Servizio Tecnico Centrale, Dec. 2018.
15. AC 434-13, Acceptance criteria for masonry and concrete strengthening using fabric-reinforced cementitious matrix (FRCM) composite systems, 2013.
16. FRP-masonry debonding: numerical and experimental study of the role of mortar joints10.1061/(ASCE)CC.1943-5614.0000282 ↗
17. The effect of the shape of the cohesive material law on the stress transfer at the FRP-masonry interface10.1016/j.compositesb.2016.11.012 ↗
18. Survey on the interface behaviour in reinforced concrete beams strengthened with externally bonded FRP reinforcement10.1016/j.compositesb.2017.02.047 ↗
19. Fiber reinforced composites with cementitious (inorganic) matrix
20. Reversible techniques for FRP-confinement of masonry columns10.1016/j.conbuildmat.2019.07.124 ↗
21. Analysis of the bond between Fabric Reinforced Cementitious Mortar (FRCM) strengthening systems and concrete10.1016/j.compositesb.2014.10.027 ↗
22. A qualification method for externally bonded Fibre Reinforced Cementitious Matrix (FRCM) strengthening systems10.1016/j.compositesb.2015.03.079 ↗
23. A comparison of the bond behavior of PBO-FRCM composites determined by double-lap and single-lap shear tests10.1016/j.cemconcomp.2015.07.007 ↗
24. Experimental investigation of tensile and bond properties of carbon-FRCM composites for strengthening masonry elements10.1016/j.compositesb.2017.06.018 ↗
25. Experimental analysis on tensile and bond properties of PBO and aramid fabric reinforced cementitious matrix for strengthening masonry structures10.1016/j.compositesb.2017.05.048 ↗
26. Matrix–fiber bond behavior in PBO FRCM composites: a fracture mechanics approach10.1016/j.engfracmech.2014.01.011 ↗
27. An indirect method to calibrate the interfacial cohesive material law for FRCM-concrete joints10.1016/j.matdes.2017.04.038 ↗
28. Experimental analysis on bond between PBO-FRCM strengthening materials and concrete10.1016/j.compositesb.2012.03.011 ↗
29. Round Robin Test for composite-to-brick shear bond characterization10.1617/s11527-012-9883-5 ↗
30. Round Robin Test on tensile and bond behaviour of steel reinforced grout systems10.1016/j.compositesb.2017.03.052 ↗
31. Bond-slip relations for PBO-FRCM materials externally bonded to concrete10.1016/j.compositesb.2012.06.002 ↗
32. The role of the fiber–matrix interfacial properties on the tensile behavior of FRCM coupons10.1016/j.conbuildmat.2020.120263 ↗
33. Tensile testing of FRCM coupons for material characterization: discussion of critical aspects10.1061/(ASCE)CC.1943-5614.0001223 ↗
34. Finite difference model for the bond behaviour of polyparaphenylene benzobi-soxazole (PBO) fibre-reinforced composite system for retrofitting masonry10.4028/p-6848f4 ↗
35. Theoretical model for the study of the tensile behavior of FRCM reinforcements
36. Analytical assessment of the stress-transfer mechanism in FRCM composites10.1016/j.compstruct.2019.03.074 ↗
37. A bending test set-up for the investigation of the bond properties of FRCM strengthenings applied to masonry substrates10.4028/www.scientific.net/KEM.817.149 ↗
38. Study of the influence of interface normal stresses on the bond behavior of FRCM composites using direct shear and modified beam tests10.1016/j.conbuildmat.2020.120029 ↗
39. Experimental and analytical investigation of PBO FRCM-concrete bond behavior using direct and indirect shear test set-ups10.1016/j.compstruct.2021.113672 ↗
40. Loading rate effect on the debonding phenomenon in fiber reinforced cementitious matrix-concrete joints10.1016/j.compositesb.2016.09.087 ↗
41. Determination of the matrix-fiber cohesive material law of FRCM-concrete joints10.4028/p-366hdm ↗
42. EN 1015-11:2019, Methods of Test for Mortar for Masonry – Part 11: Determination of Flexural and Compressive Strength of Hardened Mortar, UNI EN, 2019.
43. 〈https://www.bigmat.it/prodotti-a-marchio/edilizia/dettaglio/calcestruzzo-bigmat〉.
44. EN 12390-3:2019, Testing Hardened Concrete – Part 3: Compressive Strength of Test Specimens, UNI EN, 2019.
45. Modeling the behavior of externally bonded reinforcement using a rigid-trilinear cohesive material law10.1016/j.ijsolstr.2022.111641 ↗
46. Analytical solution of the bond behavior of FRCM composites using a rigid-softening cohesive material law10.1016/j.compositesb.2019.107051 ↗