journal article·2023-12Open access

Asphalt mixture with nucleus-shell structural microwave enhanced aggregate: Structure design, preparation and performance

Yu Zhao, Xiaoming Liu, Deming Wei

Abstract

The natural aggregates in asphalt mixture with poor electromagnetic loss have poorer microwave absorption capacity and lower microwave energy utilization. The nucleus-shell structural microwave enhanced aggregate (NSSA) consisting with external microwave absorbing and heat collecting structure layer (ESL) and internal limestone was designed to enhance the microwave absorption capacity. The composition and thickness of the ESL were determined. The microwave heating efficiency, microwave energy utilization rate and water stability of asphalt mixture with NSSA and the influence of NSSA on the distribution of electromagnetic field intensity were studied by laboratory test and numerical simulation. The electromagnetic parameters test results show that the ESL had better impedance matching with air when the SiC: Fe3O4: cement: water = 1:2:15:6.3. The ESL thickness should not exceed 4.68 mm considering the penetration ability of 2.45 GHz electromagnetic wave. The microwave heating test results show that the heating rate and energy utilization rate of NSSA were 1.76 times and 5.93 times higher than those of limestone. Furthermore, the asphalt mixture with NSSA had higher heating rate, temperature uniformity and energy utilization rate. The overall water stability of asphalt mixture with NSSA remained the same or even better because the ESL wrapped the pores inside the limestone. The simulation results show that the asphalt mixture with NSSA had larger electromagnetic field intensity and better uniformity of electromagnetic field distribution during microwave heating. In conclusion, the NSSA and the asphalt mixture with NSSA has better microwave absorption capacity and microwave energy utilization rate.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Asphalt Pavement Performance Evaluation · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Heating asphalt mixtures with microwaves to promote self-healing10.1016/j.conbuildmat.2012.12.007 ↗
2. Microwave heating mechanism and self-healing performance of asphalt mixture with basalt and limestone aggregates10.1016/j.conbuildmat.2022.127973 ↗
3. Study of key technology on microwave deicing efficiency
4. Investigation of the microwave absorption of asphalt mixtures containing magnetite powder10.3390/coatings9120813 ↗
5. Preparation and properties of microwave-absorbing asphalt mixtures containing graphite and magnetite powder10.1520/JTE20180453 ↗
6. Self-healing capacity of asphalt mixtures with steel fiber, steel slag and graphite powder, evaluated with microwave induction and fatigue test
7. Effect of fiber reinforcement on self-healing ability of asphalt mixture induced by microwave heating10.1016/j.conbuildmat.2022.129701 ↗
8. Microwave deicing of functional pavement using sintered magnetically separated fly ash as microwave-heating aggregate10.1061/(ASCE)MT.1943-5533.0002771 ↗
9. Properties of Ca-alginate capsules to maximise asphalt self-healing properties10.1016/j.conbuildmat.2021.122728 ↗
10. The mechanical resistance of asphalt mixture with steel slag to deformation and skid degradation based on laboratory accelerated heavy loading test10.3390/ma15030911 ↗
11. Laboratory investigation on deicing characteristics of asphalt mixtures using magnetite aggregate as microwave-absorbing materials10.1016/j.conbuildmat.2016.07.137 ↗
12. Microwave heating improvement of asphalt mixtures through optimizing layer thickness of magnetite and limestone aggregates10.1016/j.jclepro.2020.123090 ↗
13. Effect of metallic-waste aggregates on microwave self-healing performances of asphalt mixtures10.1016/j.conbuildmat.2020.118510 ↗
14. Utilization of low-grade pyrite cinder for synthesis of microwave heating ceramics and their microwave deicing performance in dense-graded asphalt mixtures10.1016/j.jclepro.2017.09.175 ↗
15. Techniques for snow-melting and deiced based on microwave and magnet coupling effect
16. Induction heating of electrically conductive porous asphalt concrete10.1016/j.conbuildmat.2009.12.019 ↗
17. Enhanced electromagnetic wave absorption by optimized impedance matching: covalently bonded polyaniline nanorods over graphene nanoplates10.1007/s10854-019-02305-w ↗
18. Temperature analyses of porous asphalt mixture using steel slag aggregates heated by microwave through laboratory tests and numerical simulations10.1016/j.jclepro.2022.130614 ↗
19. Microwave absorption enhancement of nickel cobalt phosphides by decorating on reduced graphene oxide10.1016/j.jssc.2019.06.019 ↗
20. Microwave absorbing property enhancement of FeSiCr nanomaterials by regulating nanoparticle size10.1016/j.jallcom.2019.06.327 ↗
21. Broadband microwave absorption of Fe3O4-BaTiO3 composites enhanced by interfacial polarization and impedance matching10.1016/j.compositesb.2019.01.008 ↗
22. Microwave absorption enhancement of asphalt concrete with SiC-Fe3O4 mixtures modifier10.1016/j.conbuildmat.2020.119209 ↗
23. Preparation and properties of porous microwave absorption functional aggregate
24. Liu · 2018
25. Improving the electromagnetic properties of bitumen using SiC-Fe3O4 composites10.1061/(ASCE)MT.1943-5533.0003953 ↗
26. Asphalt mixture skeleton main force chains composition criteria and characteristics evaluation based on discrete element methods10.1016/j.conbuildmat.2022.126313 ↗
27. Asphalt mixture force chains morphological characteristics and bearing capacities investigation using discrete element method10.1080/10298436.2023.2168660 ↗
28. Very high early strength of ultra-high performance concrete containing nanoscale pozzolans using the microwave heat curing method10.1680/adcr.2008.20.4.175 ↗
29. Application of entransy dissipation extremum principle in radiative heat transfer optimization10.1007/s11431-008-0141-6 ↗
30. Dielectric properties and microwave heating of oil palm biomass and biochar10.1016/j.indcrop.2013.08.007 ↗
31. Effect of temperature on dielectric property and microwave heating behavior of low grade Panzhihua ilmenite ore10.1016/S1003-6326(13)62889-7 ↗
32. Analytical prediction and field validation of transient temperature field in asphalt pavements10.1007/s11771-015-3039-z ↗
33. Comparison of calculated and measured thermal stresses in asphalt concrete10.3846/bjrbe.2015.05 ↗
34. Comprehensive analysis on influences of aggregate, asphalt and moisture on interfacial adhesion of aggregate-asphalt system10.1080/01694243.2020.1816792 ↗
35. J. E20-2011, Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering, 2011, p. 373P., A4.
36. Research on th numerical design method of asphalt concrete gradation curve and its influence on the effective elastic modulus
37. Analysis of influence factor on thermal stress of asphalt pavement structure on Qinghai-Tibet highway
38. Pore structure and multifractal analysis of coal subjected to microwave heating10.1016/j.powtec.2019.02.009 ↗
39. Morphological characteristics of aggregates and their influence on the performance of asphalt mixture10.1016/j.conbuildmat.2018.07.124 ↗
40. Effect of coarse aggregate morphologies on the hydrodynamic pressure-resulted moisture susceptibility of asphalt mixtures10.1061/(ASCE)MT.1943-5533.0003446 ↗
41. Mechanistic performance of asphalt-concrete mixture incorporating coarse recycled concrete aggregate10.1061/(ASCE)MT.1943-5533.0000668 ↗