Preparation and curing properties of waterborne epoxy emulsified asphalt/DMP-30 composites
Source abstract
Abstract
The objective of this paper is to investigate the effect of DMP-30 on the curing rate and mechanical properties of waterborne epoxy emulsified asphalt (WEREA). WEREA/DMP-30 composites were prepared and the high temperature rheological properties, low temperature rheological properties, adhesion properties, tensile properties and fluorescence microscopy images of DMP-30 modified WEREA were investigated. Results showed that DMP-30 can effectively reduce the curing time of WEREA. There are positive and negative effects of DMP-30 on the mechanical properties of WEREA.The 1% and 2% DMP-30 dosing showed an enhancement of the high temperature performance and tensile strength, while the 3% DMP-30 dosing showed a weakening effect. In addition, the ductility and flexibility of WEREA are improved with the addition of DMP-30. The above results provide a reference for material optimization design of waterborne epoxy resin modified emulsified asphalt.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Polymer composites and self-healing · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Laboratory evaluation of waterborne epoxy bitumen emulsion for pavement preventative maintenance application10.1016/j.conbuildmat.2018.11.223 ↗
2. Properties of new cold patch asphalt liquid and mixture modified with waterborne epoxy resin10.1080/10298436.2018.1559314 ↗
3. The adhesive performance of a waterborne epoxy resin emulsified asphalt: a study under high-& low-temperature and water-immersion environments
4. Control of reactions and network structures of epoxy thermosets10.1016/j.progpolymsci.2016.06.003 ↗
5. Epoxy polymers new materials and innovations10.1002/macp.201000278 ↗
6. Effect of curing conditions on strength development in an epoxy resin for structural strengthening10.1016/j.compositesb.2011.07.006 ↗
7. Effect of curing agent and temperature on the rheological behavior of epoxy resin systems10.3390/molecules17078587 ↗
8. Cold-Curing structural epoxy resins: analysis of the curing reaction as a function of curing time and thickness10.3390/ma7096832 ↗
9. Study of the curing process of DGEBA epoxy resin through structural investigation10.1002/macp.201400510 ↗
10. Crosslinking mechanism of an anhydride-cured epoxy resin as studied by Fourier transform infrared spectrum10.1002/pol.1981.170190228 ↗
11. A study by Raman,near-infrared and dynamic-mechanical spectroscopies on the curing behaviour,molecular structure and viscoelastic properties of epoxy/anhydride networks10.1016/j.polymer.2007.04.042 ↗
12. Concurrent curing kinetics of an anhydride-cured epoxy resin and polydicyclopentadiene10.1016/j.polymer.2015.04.066 ↗
13. Determination of the degree of cure under dynamic and isothermal curing conditions with electrical impedence spectroscopy10.1002/polb.10676 ↗
14. Study on novel waterborne epoxy resin Emulsion and its film formation
15. Study on the curing extent of waterborne epoxy systemⅡ
16. AC impedance function of electrochemical working station as novel curing degree monitor method: a model curing system of epoxy /anhydride / DMP-3010.1016/j.measurement.2019.05.103 ↗
17. Effects of DMP-30 on curing behavior of epoxy resin/maleicanhydride systems
18. Curing behaviors and properties of an extrinsic toughened epoxy/anhydride system and an intrinsic toughened epoxy/anhydride system10.1016/j.tca.2012.12.007 ↗
19. Effects of DMP-30 on curing kinetics and mechanical properties of epoxy resin/anhydride system
20. Synthesis and properties of epoxy resin rapid curing agent at low temperature
21. Effect of accelerators on the properties of low temperature curing agent / epoxy resin system
22. Morphology and image analysis of polymer modified bitumens10.1016/j.conbuildmat.2008.08.020 ↗
23. Protocol for the morphology analysis of SBS polymer modified bitumen images obtained by using fluorescent microscopy10.1080/10298436.2017.1316647 ↗
24. Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods10.1016/j.jhazmat.2007.04.122 ↗
25. Preparation method of modified asphalt fluorescence optical microscopy sample
26. Characterization of creep and recovery curve of polymer modified binder10.1016/j.conbuildmat.2012.02.018 ↗
27. Rheological properties and modification mechanism of polyphosphoric acid-modified asphalt10.1080/14680629.2018.1537931 ↗
28. Creep-recovery behavior of bituminous binders and its relation to asphalt mixture rutting10.1617/s11527-014-0464-7 ↗
29. Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance - a laboratory study10.1016/j.conbuildmat.2015.06.044 ↗
30. Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA)10.1016/j.conbuildmat.2017.06.115 ↗
31. Analytical investigation of the impact of a novel bio-based recycling agent on the colloidal stability of aged bitumen10.1080/14680629.2017.1304257 ↗
32. Study on the effects of reversible aging on the low temperature performance of asphalt binders
33. the direct experimental measurement of mortar fracture tough-ness by a compression-to-tensile load transformer (CTLT)10.1016/j.conbuildmat.2018.06.066 ↗
34. Investigating the tensile strength of concrete-gypsum interface using the ring type bi-material specimens10.1007/s12517-021-08096-x ↗
35. Cryogenic properties of SiO2/epoxy nanocomposites10.1016/j.cryogenics.2005.03.003 ↗
36. Simultaneous improvements in the cryogenic tensile strength, ductility and im-pact strength of epoxy resins by a hyperbranched polymer10.1016/j.polymer.2008.05.008 ↗