Synthesis of kaliophilite from high calcium fly ash: Effect of alkali concentration
Source abstract
Abstract
In recent years, the synthesis of zeolite-like products (such as kaliophilite) has been a hot spot due to its high thermal stability, which is excellent inorganic insulating filler and is expected to be widely applied in the field of fireproof materials. Therein, high calcium fly ash is applied to synthesize kaliophilite by hydrothermal method. The microstructure evolution of kaliophilite was investigated, and the effect of alkali concentration on the kaliophilite formation mechanism was analyzed by XRD, SEM, TG-DSC, FT-IR and 29Si NMR. The results showed that the synthesized kaliophilite presented high thermal stability, and the mass loss was low by 8.83 % at 1000 °C. Hydrothermal promoted the formation of kaliophilite that Q4(0Al), Q4(1Al), Q4(2Al), Q4(3Al) and crystal silicon turned into Q4(4Al) after hydrothermal transformation. Furthermore, alkali concentration played a key role in the hydrothermal transforming process that low alkali concentration below 8 mol/L had little effect on the synthesis of kaliophilite, while high alkali concentration (≥ 8 mol/L) contributed to the formation of kaliophilite.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A review of the alumina recovery from coal fly ash, with a focus in China10.1016/j.fuel.2013.12.003 ↗
2. Reviews of clean coal conversion technology in China: situations & challenges10.1016/j.cjche.2021.04.004 ↗
3. Application of coal fly ash in pavement subgrade stabilisation: a review10.1016/j.jenvman.2022.114926 ↗
4. Applications of fly ash for CO2 capture, utilization, and storage10.1016/j.jcou.2018.11.011 ↗
5. Effective carbon emission reductions from using upgraded fly ash in the cement industry10.1016/j.jclepro.2015.04.136 ↗
6. A review on the utilization of fly ash10.1016/j.pecs.2009.11.003 ↗
7. Toward clean cement technologies: a review on alkali-activated fly-ash cements incorporated with supplementary materials10.1016/j.jnoncrysol.2019.01.025 ↗
8. Utilization of fly ash cenosphere as lightweight filler in cement-based composites – a review10.1016/j.conbuildmat.2017.03.188 ↗
9. Deterioration of ambient-cured and heat-cured fly ash geopolymer concrete by high temperature exposure and prediction of its residual compressive strength10.1016/j.conbuildmat.2020.120924 ↗
10. Flexural behaviour of geopolymer concrete beams exposed to elevated temperatures10.1016/j.jobe.2017.09.009 ↗
11. Co-application of biochar and lignite fly ash on soil nutrients and biological parameters at different crop growth stages of Zea mays10.1016/j.ecoleng.2013.07.011 ↗
12. Morupule fly ash as amendments in agricultural soil in Central Botswana10.1016/j.eti.2022.102695 ↗
13. Chrome removal from bulk drug industry effluent using fly ash waste generated in industrial process
14. Removal of mixed heavy metal ions in wastewater by zeolite 4A and residual products from recycled coal fly ash10.1016/j.jhazmat.2005.06.027 ↗
15. Production of a novel slow-release coal fly ash microbial fertilizer for restoration of mine vegetation10.1016/j.wasman.2021.02.007 ↗
16. Life cycle assessment of magnetized fly-ash compound fertilizer production: a case study in China10.1016/j.rser.2017.02.005 ↗
17. A review on fly ash characteristics – towards promoting high volume utilization in developing sustainable concrete10.1016/j.jclepro.2017.01.114 ↗
18. A laboratory investigation of steel to fly ash-based geopolymer paste bonding behavior after exposure to elevated temperatures10.1016/j.conbuildmat.2020.119267 ↗
19. A comparative study on geopolymers synthesized by different classes of fly ash after exposure to elevated temperatures10.1016/j.jclepro.2020.122500 ↗
20. Thermal shock reactions of Ordinary Portland cement and geopolymer concrete: microstructural and mechanical investigation10.1016/j.conbuildmat.2018.11.098 ↗
21. The fire resistance of alkali-activated cement-based concrete binders
22. Synthesis of alkali aluminosilicates – materials for alkali contaminated environments at high temperatures10.1111/j.1744-7402.2012.02772.x ↗
23. High thermal expansion KAlSiO4 ceramic10.1007/BF00357849 ↗
24. Kaliophilite from fly ash: synthesis, characterization and stability10.1007/s12034-011-0375-y ↗
25. Low-energy synthesis of kaliophilite catalyst from circulating fluidized bed fly ash for biodiesel production10.1016/j.fuel.2019.116041 ↗
26. Changes in compressive strength, microstructure and magnetic properties of a high-calcium fly ash geopolymer subjected to high temperatures10.1016/j.conbuildmat.2020.120650 ↗
27. The effect of alkali concentration and solid/liquid ratio on the hydrothermal synthesis of zeolite NaA from natural kaolinite10.1016/j.micromeso.2005.07.008 ↗
28. Controlled growth of Beta zeolites with different morphologies and sizes by manipulating the water concentration10.1016/j.colsurfa.2020.125386 ↗
29. Single-hole hollow tetragonal LaVO4:Eu3+ microspheres prepared by Ostwald ripening and their luminescence property10.1016/j.jlumin.2017.08.028 ↗
30. Synthesis of zeolites by in-situ conversion of geopolymers and their performance of heavy metal ion removal in wastewater: a review10.1016/j.jclepro.2022.131441 ↗
31. Shell-strengthened hollow architecture of NiCo2S4 carved through an in-situ reaction Ostwald Ripening mechanism with significantly enhanced electrochemical performance10.1016/j.jallcom.2021.161632 ↗
32. Potassium cation induced controllable synthesis of CAN zeolite hollow microspheres10.1016/j.micromeso.2016.01.022 ↗
33. Fly ash geopolymer mortar: impact of the substitution of river sand by copper slag as a fine aggregate on its thermal resistance properties10.1016/j.jclepro.2020.123766 ↗
34. Effect of supplementary cementitious materials on carbonation of cement pastes10.1016/j.cemconres.2021.106358 ↗
35. Physical and mechanical properties and micro characteristics of fly ash-based geopolymer paste incorporated with waste Granulated Blast Furnace Slag (GBFS) and functionalized Multi-Walled Carbon Nanotubes (MWCNTs)10.1016/j.jhazmat.2020.123339 ↗
36. How does Na, K alkali metal concentration change the early age structural characteristic of kaolin-based geopolymers10.1016/j.ceramint.2014.02.052 ↗
37. Thermal stability and microstructure of metakaolin-based geopolymer blended with rice husk ash10.1016/j.clay.2020.105769 ↗
38. Characterization and performance evaluation of laterite based geopolymer binder cured at different temperatures10.1016/j.conbuildmat.2020.121443 ↗
39. Fly ash–GGBS geopolymer in boron environment: a study on rheology and microstructure by ATR FT-IR and MAS NMR10.1016/j.conbuildmat.2020.120965 ↗
40. Structural reorganisation of class F fly ash in alkaline silicate solutions10.1016/S0927-7757(02)00237-6 ↗
41. Hydrothermal interconversion of FAU-type zeolite in the presence of sodium and tetramethylammonium ions10.1016/j.micromeso.2021.111019 ↗
42. Effect of kaolin and argillite mixtures on the dielectric properties of geopolymers10.1016/j.oceram.2020.100035 ↗
43. 2 – an overview of the chemistry of alkali-activated cement-based binders
44. 29Si MAS NMR and FTIR study of inorganic–organic hybrid gels10.1016/j.molstruc.2004.11.069 ↗
45. Effects of aluminum on the expansion and microstructure of alkali-activated MSWI fly ash-based pastes10.1016/j.chemosphere.2019.124986 ↗
46. Effects of curing temperature on the compressive strength and microstructure of copper tailing-based geopolymers10.1016/j.chemosphere.2020.126754 ↗
47. Synthesis and characterization of KAlSiO4 polymorphs on the SiO2-KAlO2 join10.1006/jssc.1995.1123 ↗
48. The distribution of aluminum in the tetrahedra of silicates and aluminates
49. Synthesis and characterization of geopolymer prepared from circulating fluidized bed-derived fly ash10.1016/j.ceramint.2022.01.052 ↗