Mechanics and road performance of mudstone modified stabilized gravel subgrade in arid desert areas

This study investigates the feasibility of using mudstone to enhance poorly graded gravel in certain arid regions of the S21 Altay-Urumqi Highway project in Xinjiang. Despite mudstone typically being considered a poor-quality rock, its combination with higher-performance materials like cement, lime, and fly ash can stabilize expansive soils for use as roadbed fill. In the experiments, 30% and 40% mudstone were added to the gravel mixture. The experiments were compared with unmodified K80 and 35% crushed rock mixes. The findings reveal that adding 30% mudstone substantially increased the California Bearing Ratio (CBR) of the gravel mix by over 20%. However, excessive mudstone inclusion could weaken load-bearing capacity. Moreover, mudstone-modified specimens exhibited superior unconfined compressive strength (UCS), splitting strength , compressive resilience modulus (CRM), drying shrinkage resistance, and temperature shrinkage resistance. Under optimum cement dosage, the UCS of mudstone-modified specimens outperformed unmodified specimens, consistently surpassing fly ash-altered groups. Although mixed fly ash initially exhibited lower strength, it gradually approached cement-stabilized strength with an extended curing time. Incorporating crushed stone into the grading curve significantly increased splitting strength due to its high strength and hardness. In contrast, adding mudstone introduced a notable proportion of fine aggregates, resulting in a looser grading skeleton prone to early cracking. This research demonstrates that mudstone enhancement significantly improves roadbed performance, including increased CBR, splitting strength, and crack resistance. The use of mudstone in arid desert areas enhances overall performance while reducing shrinkage coefficients. The suggested approach for semi-rigid pavements in arid deserts recommends specific mineral proportions, various aggregate sizes, an appropriate amount of cement, and 30% mudstone to create dense structures with a higher quantity of coarse aggregate.