Utilization of ultra-fine dredged sand from the Yangtze River in alkali-activated slag/fly ash mortars: Mechanical properties, drying shrinkage and microstructure
Source abstract
Abstract
The ultra-fine dredged sand (DS) from the lower reaches of the Yangtze River is a large amount of solid waste with the potential to be recycled and applied as a replacement for fine aggregate. This article discussed the utilization of dredged sand by producing alkali activated materials (AAMs). The chemical and physical characteristics of the DS were analyzed. The effect of the DS on durability and mechanical characteristics of the alkali activated slag/fly materials were studied with different precursor systems. From the results, it was found that the addition of DS improved the 28 d strength and even 56 d strength. The 25% DS content increased the compressive strength of both slag rich and fly ash (FA) rich AAMs by about 5%, and the microstructure showed a denser matrix at this content. However, excessive DS can cause a decrease in flowability, early compressive strength and a decline in the compactness of the matrix. Adding an appropriate amount of DS can control the drying shrinkage. The 25% DS content has an inhibitory effect on the shrinkage development of slag rich mortar, while the similar effect on FA rich mortar appears at a content of over 50%. The adoption of DS addition to produce AAMs improves the ecological benefits of concrete engineering projects on the Yangtze River coast.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Investigation of the high-temperature resistance of sludge ceramsite concrete with recycled fine aggregates and GGBS and its application in hollow blocks
2. Behavior of geopolymer concrete deep beams containing waste aggregate of glass and limestone as a partial replacement of natural sand
3. Design, fabrication, and characterization of distinguished lightweight and sustainable building materials
4. Physical-mechanical and microstructural properties of alkali-activated fly ash-blast furnace slag blends10.1016/j.ceramint.2014.09.075 ↗
5. Sustainable re-use of waste glass, cement and lime treated dredged material as pavement material
6. Beneficial utilization of ultra-fine dredged sand from Yangtze River channel as a concrete material based on the minimum paste theory
7. Mechanical properties and chloride permeability of green concrete mixed with fly ash and coal gangue10.1016/j.conbuildmat.2019.117166 ↗
8. Mechanical properties of concrete mixed with recycled powder produced from construction and demolition waste10.1016/j.jclepro.2018.03.277 ↗
9. Channel dynamics and geomorphic resilience in an ephemeral Mediterranean river affected by gravel mining10.1016/j.geomorph.2017.02.026 ↗
10. Zeta potential, gel formation and compressive strength of low calcium fly ash geopolymers10.1016/j.conbuildmat.2015.07.175 ↗
11. Waste foundry sand in concrete: a review10.1016/j.conbuildmat.2017.09.010 ↗
12. Utilization of sediments dredged from marine ports as a principal component of composite material10.1016/j.jclepro.2016.10.035 ↗
13. About a possible valorisation in cementitious materials of polluted sediments after treatment10.1016/j.cemconcomp.2006.11.012 ↗
14. Reuse of Tunisian marine sediments in paving blocks: factory scale experiment10.1016/j.jclepro.2015.04.138 ↗
15. Effect of sillimanite sand on the mechanical property and thermal resistance of alkali-activated slag mortar10.1016/j.conbuildmat.2023.130654 ↗
16. Potential use of sillimanite sand in sustainable geopolymer concrete production10.1061/(ASCE)MT.1943-5533.0003826 ↗
17. Recent progress in understanding setting and hardening of alkali-activated slag (AAS) materials10.1016/j.cemconcomp.2022.104795 ↗
18. Fundamental understanding of the setting behaviour of the alkali activated binders based on ground granulated blast furnace slag and fly ash10.1016/j.conbuildmat.2021.123243 ↗
19. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature10.1016/j.matdes.2014.05.001 ↗
20. GB/T 1596-2017 · 2017
21. GB/T18046-2008 · 2008
22. GB/T 14684-2011 Sand for Construction · 2011
23. Alkali-activated fly ash/slag cement - Strength behaviour and hydration products10.1016/S0008-8846(00)00298-2 ↗
24. The impact of accelerated maintenance system on alkali-activated mortar incorporating ultra-fine dredged sand
25. ASTM C305 · 1999
26. GB/T 2419 · 2005
27. GB/T 17671-1999 · 1999
28. JGJ-T70-2009 · 2009
29. Underlying mechanisms of the influence of fine aggregates' content and properties on mortar's plastic viscosity
30. Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes10.1016/j.conbuildmat.2013.07.106 ↗
31. Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags10.1016/j.cemconres.2010.11.016 ↗
32. Reactivity and reaction products of alkali-activated, fly ash/slag paste10.1016/j.conbuildmat.2015.02.022 ↗
33. Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete10.1016/j.conbuildmat.2016.11.034 ↗
34. Comparison of long term performance between alkali activated slag and fly ash geopolymer concretes10.1016/j.conbuildmat.2017.03.153 ↗
35. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash10.1016/j.cemconcomp.2013.09.006 ↗
36. Partial replacement of copper slag with treated crumb rubber aggregates in alkali-activated slag mortar10.1016/j.conbuildmat.2020.119468 ↗
37. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
38. Effect of pore size distribution on drying shrinkage of alkali-activated slag concrete10.1016/S0008-8846(00)00327-6 ↗
39. Understanding the drying shrinkage performance of alkali-activated slag mortars10.1016/j.cemconcomp.2016.11.010 ↗
40. Shrinkage characteristics of alkali-activated slag cements10.1061/(ASCE)MT.1943-5533.0001058 ↗
41. Drying and autogenous shrinkage of pastes and mortars with activated slag cement10.1016/j.cemconres.2007.11.002 ↗
42. Mineralogical and microstructural characterisation of alkali-activated fly ash/slag pastes10.1016/S0958-9465(02)00059-8 ↗
43. Study on the characteristics of alkali-activated fly ash-slag improved by cenosphere: hydration and drying shrinkage10.1016/j.conbuildmat.2023.130822 ↗
44. Effect of lime mud under wet grinding on the compressive strength and hydration of cement mortar10.1016/j.cemconcomp.2023.105067 ↗
45. Effect of mix design parameters on mechanical and durability properties of alkali activated slag concrete10.1016/j.conbuildmat.2018.10.189 ↗
46. Microstructure development of alkali-activated fly ash cement: a descriptive model10.1016/j.cemconres.2004.08.021 ↗
47. Hydrolytic stability of sodium silicate gels in the presence of aluminum10.1007/s10853-010-4586-1 ↗
48. Portland cement-blast furnace slag mortars activated using waterglass: effect of temperature and alkali concentration10.1016/j.conbuildmat.2014.04.120 ↗
49. Individual and combined effects Of Portland cement-based hydrated mortar components on alkali-activated slag cement10.1016/j.conbuildmat.2014.09.096 ↗