A rheological-based printability assessment method for 3D printing Engineered Cementitious Composites considering fiber dispersion
Source abstract
Abstract
3D concrete printing (3DCP) presents unique challenges in optimizing rheological properties of concrete mixture, while tailoring the rheology of engineered cementitious composites (ECC) for 3D printing (3DP-ECC) is more intricate due to the added complexity of fiber dispersion. This study proposes an innovative printability evaluation method specifically designed for 3DP-ECC, which takes into account the impact of fiber dispersion while also emphasizing cost-effectiveness and efficiency. Additionally, the proposed method enables the calculation of the printable open time, thus adjusting the mixing time of the ECC paste. The feasibility of the proposed method was verified through actual printing test and rheological test, and experimental results showed good agreement with theoretical results. The tensile performance of 3DP-ECC was also investigated, providing further validation for the proposed methodology.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Evaluation of the mechanical and photocatalytic properties of TiO2-reinforced cement-based materials in binder jet 3D printing
2. Effect of FA and GGBFS on compressive strength, rheology, and printing properties of cement-based 3D printing material10.1016/j.conbuildmat.2022.127685 ↗
3. Magnesium phosphate cement for powder-based 3D concrete printing: systematic evaluation and optimization of printability and printing quality10.1016/j.cemconcomp.2023.105000 ↗
4. The printable and hardened properties of nano-calcium carbonate with modified polypropylene fibers for cement-based 3D printing10.1016/j.conbuildmat.2023.130594 ↗
5. Development of a calcium sulfoaluminate-Portland cement binary system for twin-pipe 3D concrete printing10.1016/j.cemconcomp.2023.104960 ↗
6. Development of composites for 3D printing with reduced cement consumption10.1016/j.conbuildmat.2022.127775 ↗
7. Particle-bed 3D printing by selective cement activation – influence of process parameters on particle-bed density10.1016/j.cemconres.2023.107140 ↗
8. Fresh and mechanical properties of low-cement mortars for 3D printing10.1016/j.conbuildmat.2022.127644 ↗
9. Experimental investigation of basalt textile reinforced engineered cementitious composite under apparent hoop tensile loading10.1016/j.jobe.2019.01.037 ↗
10. Use of hollow glass microspheres and hybrid fibres to improve the mechanical properties of engineered cementitious composite10.1016/j.conbuildmat.2018.03.172 ↗
11. Correlation of flaw structure and cracking behavior in SHCC with X-ray CT scanning technique10.1016/j.conbuildmat.2022.127296 ↗
12. Highly accurate and automatic semantic segmentation of multiple cracks in engineered cementitious composites (ECC) under dual pre-modification deep-learning strategy10.1016/j.cemconres.2022.107066 ↗
13. Mechanical behavior of a novel precast beam-to-column connection with U-shaped bars and engineered cementitious composites10.1177/1369433218761139 ↗
14. Influence of printing parameters on 3D printing engineered cementitious composites (3DP-ECC)10.1016/j.cemconcomp.2022.104562 ↗
15. Time-dependent fresh properties characterization of 3D printing engineered cementitious composites (3DP-ECC): on the evaluation of buildability10.1016/j.cemconcomp.2022.104704 ↗
16. A multiscale model for quantifying fiber orientation effects on the tensile properties of 3D printed Engineered Cementitious Composites (3DP-ECC)
17. Thermal-dependent brittleness effect of ultra-high performance concrete exposed to cryogenic flexural loads by acoustic emission evaluation10.1016/j.cemconcomp.2023.105056 ↗
18. Crack width control and mechanical properties of low carbon engineered cementitious composites (ECC)10.1016/j.conbuildmat.2022.128692 ↗
19. Rheology, fiber dispersion, and robust properties of Engineered Cementitious Composites10.1617/s11527-012-9909-z ↗
20. Scale effects in prestressed concrete structures: maximum reinforcement percentage to avoid brittle crushing10.1016/j.engstruct.2022.113911 ↗
21. A consistent safety format and design approach for brittle systems and application to textile reinforced concrete structures10.1016/j.engstruct.2021.113306 ↗
22. Engineered cementitious composites (ECC) with a high volume of volcanic ash: rheological, mechanical, and micro performance10.1016/j.cemconcomp.2023.105051 ↗
23. Rheological behavior and formwork pressure of SCC, SFSCC, and NC mixtures10.1016/j.cemconcomp.2014.05.001 ↗
24. Flexural performance of 3D-printed composite beams with ECC and recycled fine aggregate concrete: Experimental and numerical analysis10.1016/j.engstruct.2023.115865 ↗
25. 3D-printable engineered cementitious composites (3DP-ECC): Fresh and hardened properties10.1016/j.cemconres.2021.106388 ↗
26. Validation of BTRHEOM, the new rheometer for soft-to-fluid concrete10.1007/BF02485970 ↗
27. Crack propagation and failure mechanism of 3D printing engineered cementitious composites (3DP-ECC) under bending loads10.1016/j.conbuildmat.2023.133809 ↗
28. Numerical simulation of self-consolidating engineered cementitious composite flow with the V-funnel and U-box10.1016/j.conbuildmat.2019.117467 ↗
29. Properties and microstructures of 3D printable sulphoaluminate cement concrete containing industrial by-products and nano clay
30. On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)10.1016/j.cemconres.2020.106038 ↗
31. Effects of fiber volume fraction, fiber length, water-binder ratio, and nanoclay addition on the 3D printability of strain-hardening cementitious composites (SHCC)10.1016/j.cemconcomp.2023.105066 ↗
32. Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction10.1016/j.matdes.2019.108088 ↗
33. Mechanical properties of engineered cementitious composites beams fabricated by extrusion-based 3D printing10.1016/j.engstruct.2021.112201 ↗