Evaluating performance of carbon fiber-reinforced pavement with embedded sensors using destructive and non-destructive testing
Source abstract
Abstract
Installation of concrete pavement at the curb travel lane at the bus stop is a common way to improve the resistance of bus pads to environmental and petroleum deterioration in Canada. The Satisfactory condition of concrete pavements remains a key consideration in the development of infrastructure, especially in countries with an aggressive environment. Innovative materials that could remarkably increase the service life of infrastructure are being researched and developed over decades. This paper aggregates the real-time comparison between the performance of a carbon fiber-reinforced concrete (CFRC) bus pad and a normal concrete bus pad. A series of wireless sensors such as temperature and humidity sensors, thermocouples and strain gauges were embedded in both pavements during the construction. Additionally, a series of six piezoelectric patches were embedded in the concrete in each bus pad. Visual monitoring exhibited that the carbon fiber-reinforced bus-pad remained cracked free while exhibiting some balling of carbon fibers on the surface of pavement whereas the normal concrete bus pads exhibited several hairline cracks in the first 10 days of construction. Along with the visual monitoring using a thermal imaging camera (FLIR), data was acquired regularly from both bus-pads at regular intervals. After 28 days of construction, Non-destructive tests (NDT) including Schmidt Hammer (SH), Electrical Resistivity (ER) and Ultrasonic Pulse Velocity (UPV) were conducted on both the bus pads. When compared to normal concrete bus pads, which have electrical resistivities of roughly 30 kΩ-cm, CFRC bus pads showed extremely low electrical resistivity. Schmidt hammer and UPV both revealed degradation in the normal concrete bus pad in comparison to the CFRC bus pad. Several clusters of very low UPV values were observed in the location of bus pad cracks. The lesser values in the CFRC bus pad are indicative of the scatter in the wave energy due to the presence of carbon fibers.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Smart Materials for Construction · Concrete Corrosion and Durability · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Municipal Roads - The Canadian Infrastructure Report Card Available online: http://canadianinfrastructure.ca/en/municipal-roads.html (Accessed on 9 December 2020).
2. Government of Canada, S.C. Commuting to Work during COVID-19 Available online: https://www150.statcan.gc.ca/n1/pub/45-28-0001/2020001/article/00069-eng.htm (Accessed on 4 January 2021).
3. A test protocol for evaluating absorption of joints in concrete pavements10.1520/JTE20160297 ↗
4. Experimental evaluation of crack width movement of continuously reinforced concrete pavement under environmental load10.1016/j.conbuildmat.2017.01.080 ↗
5. Longitudinal cracking of jointed plain concrete pavements in louisiana: field investigation and numerical simulation10.1016/j.ijprt.2018.07.004 ↗
6. Comparative study on crack and factor of continuously reinforced concrete pavement in the tunnel and outside10.1016/j.sbspro.2013.08.014 ↗
7. Caminos: Un Nuevo Enfoque Para La Gestión y Conservación de Redes Viales | Digital Repository | Economic Commission for Latin America and the Caribbean Available online: https://repositorio.cepal.org/handle/11362/30314 (accessed on 4 January 2021).
8. Influence of Polypropylene, Carbon and Hybrid Coated Fiber on the Interfacial Microstructure Development of Cementitious10.3390/fib9110065 ↗
9. Numerical investigation of the seismic vulnerability of bridge piers strengthened with steel fibre reinforced concrete (SFRC) and carbon fibre composites (CFC)
10. Effect of Curing Age on Pull-Out Response of Carbon, Steel, and Synthetic Fiber Embedded in Cementitious Mortar Matrix10.1061/(ASCE)MT.1943-5533.0004426 ↗
11. Microstructure and flexural performances of glass fibers reinforced phosphate sludge based geopolymers at elevated temperatures
12. Technological perspective for use the natural pineapple fiber in mortar to repair structures10.1007/s12649-021-01374-5 ↗
13. Guaruman fiber: A promising reinforcement for cement-based mortars
14. Mechanical and structural behaviors of ultra-high-performance fiber-reinforced concrete subjected to impact and blast10.1016/j.conbuildmat.2017.05.136 ↗
15. Zhang, J., Wu, Z., Yu, H., Ma, H., & Da, B. (2022). Mesoscopic Modeling Approach and Application for Steel Fiber Reinforced Concrete under Dynamic Loading: A Review. Engineering.10.1016/j.eng.2022.01.011 ↗
16. Fracture Behavior of Concrete Members Reinforced with Structural Synthetic Fibers10.1016/j.engfracmech.2006.01.032 ↗
17. Polypropylene fiber reinforced concrete and its application in creating architectural forms of public spaces
18. Comparison of mechanical properties of concrete and design thickness of pavement with different types of fiber-reinforcements (steel, glass, and polypropylene)
19. Effect of low-modulus polypropylene fiber on physical and mechanical properties of self-compacting concrete
20. Destructive and non-destructive experimental investigation of polypropylene fibre reinforced concrete subjected to high temperature
21. Noushini, A.; Vessalas, K.; Arabian, G.; Samali, B. Drying Shrinkage Behaviour of Fibre Reinforced Concrete Incorporating Polyvinyl Alcohol Fibres and Fly Ash Available online: https://www.hindawi.com/journals/ace/2014/836173/ (accessed on 23 April 2020).10.1155/2014/836173 ↗
22. Estimating stress relaxation and cracking potential of high-strength concrete reinforced with polyvinyl alcohol fiber at early age10.1061/(ASCE)MT.1943-5533.0004374 ↗
23. Mechanical Properties of Geopolymer Concrete Containing Polyvinyl Alcohol Fiber Exposed to High Temperature10.1016/j.conbuildmat.2016.09.001 ↗
24. Rheological and Mechanical Properties of Self-Compacting Concrete with Glass and Polyvinyl Alcohol Fibres10.1016/j.jobe.2018.02.002 ↗
25. Impact of using different amounts of polyolefin macro fibers on fracture behavior, size effect, and mechanical properties of self-compacting lightweight concrete10.1016/j.conbuildmat.2020.118856 ↗
26. Using polyolefin fibers with moderate-strength concrete matrix to improve ductility10.1061/(ASCE)MT.1943-5533.0002775 ↗
27. Karahancer, B.; Morova, N.; Karahancer, S.; Eriskin, E.; Terzi, S.; Saltan, M. Utility of Aramid, Polyolefin and Polypropylene Combination in Hot Mix Asphalt as a Fiber Material. In Proceedings of the Advances in Environmental Vibration and Transportation Geodynamics; Tutumluer, E., Chen, X., Xiao, Y., Eds.; Springer: Singapore, 2020; pp. 915–922.10.1007/978-981-15-2349-6_61 ↗
28. Flexural Performance of Hybrid Polypropylene–Polyolefin FRC Composites10.1007/s42107-019-00120-6 ↗
29. Unrestrained Early Age Shrinkage of Concrete with Polypropylene, PVA, and Carbon Fibers10.1617/s11527-006-9106-z ↗
30. Cement Reinforced with Short Carbon Fibers: A Multifunctional Material10.1016/S1359-8368(99)00071-2 ↗
31. Nie, L.; Xu, J.; Luo, X.; Chen, H.; Chang, S.; Wang, T.; Liu, G. Study of Aramid and Carbon Fibers on the Tensile Properties of Early Strength Cement Mortar. IOP Conf. Ser.: Earth Environ. Sci. 2019, 267, 032009, doi:10.1088/1755–1315/267/3/032009.10.1088/1755-1315/267/3/032009 ↗
32. Enhancement of mechanical properties of fly ash geopolymer containing fine recycled concrete aggregate with micro carbon fiber
33. Sustainable Fly Ash Based Roof Tiles with Waste Polythene Fibre: An Experimental Study10.4236/ojce.2016.62026 ↗
34. Mehvish, F., Ahmed, A., Saleem, M.M., & Saleem, M.A. (2020). Characterization of concrete incorporating waste polythene bags fibers. Pakistan Journal of Engineering and Applied Sciences.
35. Evaluation of fracture resistance of asphalt concrete involving Calcium Lignosulfonate and Polyester fiber under freeze–thaw damage10.1016/j.tafmec.2021.103168 ↗
36. Strength and Ductility Improvement of Recycled Aggregate Concrete by Polyester FRP-PVC Tube Confinement10.1016/j.compositesb.2018.10.102 ↗
37. Unsaturated polyester resin concrete: a review10.1016/j.conbuildmat.2019.116709 ↗
38. Evaluation of polyester fiber reinforced concrete for use in cement concrete pavement works10.1080/14680629.2008.9690127 ↗
39. Thermal, electrical, mechanical and fluidity properties of polyester-reinforced concrete composites10.1007/s12046-018-0847-5 ↗
40. Impact resistance of rendering mortars with natural and textile-acrylic waste fibres10.3390/fib10050044 ↗
41. Incorporation of high contents of textile, acrylic and glass waste fibres in cement-based mortars’ fresh, mechanical and deformability behaviour
42. Properties of hooked end steel fiber reinforced acrylic modified concrete10.1016/j.conbuildmat.2018.08.055 ↗
43. Effects of nylon fiber and nylon fiber fabric on the permeability of cracked concrete10.1016/j.conbuildmat.2020.121786 ↗
44. Influence of nylon fibers recycled from the scrap brushes on the properties of concrete: valorization of plastic waste in concrete
45. Effectiveness of recycled nylon fiber from waste fishing net with respect to fiber reinforced mortar10.1016/j.conbuildmat.2017.04.134 ↗
46. Effects of Nylon Fibre and Concrete Strength on the Shrinkage and Fracture Behaviour of Fibre Reinforced Concrete | SpringerLink Available online: https://link.springer.com/chapter/10.1007/978-94-024-1194-2_22 (accessed on 24 April 2020).
47. Giannopoulos, I.P.; Burgoyne, C.J. Stress Limits for Aramid Fibres. Proceedings of the Institution of Civil Engineers - Structures and Buildings 2009, 162, 221–232, doi:10.1680/stbu.2009.162.4.221.10.1680/stbu.2009.162.4.221 ↗
48. Carbon fibre reinforcement of cement10.1016/0008-8846(72)90042-7 ↗
49. Low-drying-shrinkage concrete containing carbon fibers10.1016/1359-8368(95)00020-8 ↗
50. Abd Elrazek, M., Gamal, Y.A.S. (2021, July). The Reliable Concrete Compression Strength Assessment by SCHMIDT Hammer for Different Concrete Grades. In IOP Conference Series: Materials Science and Engineering (Vol. 1171, No. 1, p. 012004). IOP Publishing.10.1088/1757-899X/1171/1/012004 ↗
51. Evaluation of elastic properties of fiber-reinforced concrete using fundamental resonance frequencies
52. The early-age prediction of concrete strength using maturity models: a review
53. Diaferio, M., Vitti, M., 2021. Correlation curves to characterize concrete strength by means of UPV tests. In Proceedings of 1st International Conference on Structural Damage Modelling and Assessment (pp. 209–218). Springer, Singapore.10.1007/978-981-15-9121-1_16 ↗
54. Delamination detection on a concrete bridge deck using impact echo scanning10.1002/suco.202000415 ↗
55. Non-destructive testing of concrete: a review of methods10.56748/ejse.141931 ↗
56. Investigation of mechanical behavior and fracture energy of fiber-reinforced concrete beams and panels10.1016/j.cemconcomp.2022.104656 ↗
57. ACI PRC-544.4–18: Guide to Design with Fiber-Reinforced Concrete Available online: https://www.concrete.org/store/productdetail.aspx?ItemID=544418&Language=English&Un its=US_AND_METRIC (Accessed on 26 October 2021).
58. C01 Committee Test Method for Flow of Hydraulic Cement Mortar; ASTM International; C01 Committee Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens); ASTM International;.
59. ASTM C109/C109–05 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens. ASTM C109/C109–05. 2008: Annual book of ASTM Standards.
60. ASTM C307 - 18 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings Available online: https://www.astm.org/Standards/C307.htm (Accessed on 1 November 2021).
61. C09 Committee Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading); ASTM International;.
62. ASTM C143 / C143M - 20 Standard Test Method for Slump of Hydraulic-Cement Concrete Available online: https://www.astm.org/Standards/C143 (Accessed on 7 April 2021).
63. C09 Committee Test Method for Compressive Strength of Cylindrical Concrete Specimens; ASTM International;.
64. C09 Committee Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel); ASTM International;.
65. CSA CAN/CSA-A300–13-Cementitious Materials Compendium (2009).
66. B.C. Transit - Planning Standards and Guidelines | Transit Future | BC Transit Available online: https://bctransit.com/kamloops/transit-future/corporate-infrastructure-initiatives/design-guidelines (accessed on 7 April 2021).
67. ASTM C231 / C231M-17a, Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method, ASTM International, West Conshohocken, PA, 2017, www.astm.org.
68. Evaluation of in situ pavement material properties and behavior through field instrumentation and load testing10.1061/(ASCE)TE.1943-5436.0000231 ↗
69. Evaluation of thermography-based automated delamination and cavity detection in concrete bridges
70. Agilent | Agilent History Timeline -, 2000s. Available online: https://www.agilent.com/about/companyinfo/history/timeline_2000s.html (Accessed on 1 November 2021).
71. Assessing concrete strength with rebound hammer: review of key issues and ideas for more reliable conclusions10.1617/s11527-013-0139-9 ↗
72. ASTM C805 / C805M - 18 Standard Test Method for Rebound Number of Hardened Concrete Available online: https://www.astm.org/Standards/C805.htm (accessed on 1 November 2021).
73. Carbon fiber-based electrically conductive concrete for salt-free deicing of pavements10.1016/j.jclepro.2018.08.315 ↗
74. Novel conductive wearing course using a graphite, carbon fiber, and epoxy resin mixture for active de-icing of asphalt concrete pavement10.1617/s11527-021-01628-7 ↗
75. Carbon fiber-based electrically conductive concrete for salt-free deicing of pavements10.1016/j.jclepro.2018.08.315 ↗
76. C09 Committee Test Method for Pulse Velocity Through Concrete; ASTM International;.
77. Performance of basalt fibre-reinforced concrete for pavement and flooring applications10.1007/s41062-020-00359-y ↗
78. Experimental investigation of ultrasonic pulse velocity (UPV) test specimen in assessing the strength of steel fiber reinforced concrete structure