Effect of scale-up on the properties of PCM-impregnated tiles containing glass scraps
Source abstract
Abstract
In the latest years, the interest about Phase Change Materials (PCM) in building applications grew in force of their capability to adsorb heat and limit in-out building heat exchanges. The main problem is how to introduce PCM into the building envelope, also in case of ventilated façades. For this purpose, a ceramic foam was studied. Two different batches based on porcelain stoneware and soda-lime glass scraps were prepared to understand the involved bloating phenomena. Suitable bulk density and porous microstructure were achieved by adding a foaming agent and batch optimization. Specimen size was scaled up (from ∅ 3 cm to 15 × 15 cm) and its effect on bloating, PCM incorporation, and thermal properties was studied. Furthermore, different firing temperatures and heating rates were evaluated. The whole study was focused to disclose possible drawbacks in the industrial transfer of the PCM-bearing composite production.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Directive (EU) 2018/844 of the European Parliament and of the Council of 30 May 2018 amending Directive 2010/31/EU on the energy performance of buildings and Directive 2012/27/EU on energy efficiency.
2. International Energy Agency · 2018
3. Chapter 3 - solar energy systems: an approach to zero energy buildings
4. A comparison between passive and active PCM systems applied to buildings10.1016/j.renene.2020.08.007 ↗
5. PCM-based building envelope systems
6. 20 - thermal energy storage systems for cooling in residential buildings
7. Investigation and properties of a novel composite bio-PCM to reduce summer energy consumptions in buildings of hot and dry10.1016/j.solener.2020.11.060 ↗
8. PCM-mortar based construction materials for energy efficient buildings: a review on research trends10.1016/j.enbuild.2017.09.098 ↗
9. Review on building energy performance improvement using phase change materials10.1016/j.enbuild.2017.10.066 ↗
10. Materials used as PCM in thermal energy storage in buildings: a review10.1016/j.rser.2010.11.018 ↗
11. Potential of macroencapsulated pcm for thermal energy storage in buildings: a comprehensive review10.1016/j.conbuildmat.2019.07.221 ↗
12. Thermal energy storage in building integrated thermal systems: a review. Part 2. Integration as passive system10.1016/j.renene.2015.06.064 ↗
13. Review on phase change energy storage: materials and applications10.1016/j.enconman.2003.09.015 ↗
14. A review on phase change materials for thermal energy storage in buildings: heating and hybrid applications10.1016/j.est.2020.101913 ↗
15. Thermal analysis of a ventilated facade with PCM for cooling applications10.1016/j.enbuild.2013.06.032 ↗
16. Experimental study of a ventilated facade with PCM during winter period10.1016/j.enbuild.2012.10.026 ↗
17. Ventilated active façades with PCM10.1016/j.apenergy.2013.01.032 ↗
18. Obtaining an energy storing building material by direct incorporation of an organic phase change material in gypsum wallboard10.1016/0165-1633(91)90021-C ↗
19. Application of PCM energy storage in combination with night ventilation for space cooling10.1016/j.apenergy.2015.08.088 ↗
20. Experimental assessment on the use of phase change materials, (PCMs)-bricks in the exterior wall of a full-scale room10.1016/j.enconman.2016.04.065 ↗
21. Utilization of macro encapsulated phase change materials for the development of thermal energy storage and structural lightweight aggregate concrete10.1016/j.apenergy.2014.11.022 ↗
22. Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings10.1016/j.enbuild.2006.02.009 ↗
23. Properties of concretes enhanced with phase change materials for building applications10.1016/j.enbuild.2019.07.014 ↗
24. Thermal analysis of a building brick containing phase change material10.1016/j.enbuild.2007.03.001 ↗
25. Brick masonry walls with PCM macrocapsules: an experimental approach10.1016/j.applthermaleng.2014.02.069 ↗
26. Development and thermal performance of nanoencapsulated PCM/ plaster wallboard for thermal energy storage in buildings
27. Experimental tile with phase change materials (PCM) for building use10.1016/j.enbuild.2011.03.031 ↗
28. The use of lightweight aggregate saturated with PCM as a temperature stabilizing material for road surfaces10.1016/j.applthermaleng.2015.02.036 ↗
29. Lightweight dense/porous PCM-ceramic tiles for indoor temperature control10.1016/j.enbuild.2015.09.019 ↗
30. Lightweight dense/porous bi-layered ceramic tiles prepared by double pressing10.1016/j.jmatprotec.2014.09.010 ↗
31. Development of eco-friendly porous fired clay bricks using pore-forming agents: a review10.1016/j.jenvman.2014.05.006 ↗
32. Cellular glass–ceramics from a self foaming mixture of glass and basalt scoria10.1016/j.jnoncrysol.2014.06.016 ↗
33. The viscosity window of the silicate glass foam production10.1016/j.jnoncrysol.2016.10.041 ↗
34. Bloating mechanism in lightweight aggregates: effect of processing variables and properties of the vitreous phase
35. Optimal control of natural ventilation as passive cooling strategy for improving the energy performance of building envelope with PCM integration10.1016/j.renene.2020.07.043 ↗
36. Climate response of a BiPV façade system enhanced with latent PCM-based thermal energy storage10.1016/j.renene.2020.01.070 ↗
37. An innovative PCM system for thermal comfort improvement and energy demand reduction in building under different climate conditions10.1016/j.scs.2018.09.008 ↗
38. Influence of glazed roof containing phase change material on indoor thermal environment and energy consumption10.1016/j.apenergy.2018.04.015 ↗
39. Uncertainty analysis of thermal conductivity measurements in materials for energy-efficient buildings10.1051/ijmqe/2011102 ↗
40. Synthesis of a foam ceramic based on ceramic tile polishing waste using SiC as foaming agent10.1016/j.ceramint.2018.02.211 ↗
41. Influence of glass-calcium carbonate mixture’s characteristics on the foaming process and the properties of the foam glass10.1016/j.jeurceramsoc.2013.12.020 ↗
42. Study of a novel ceramsite-based shape-stabilized composite phase change material (PCM) for energy conservation in buildings10.1016/j.conbuildmat.2020.118479 ↗