Combined effect of cement kiln dust and calcined dolomite raw on the properties of performance magnesium phosphate cement
Source abstract
Abstract
Starting from a local material dolomite, Magnesium Phosphate Cement (MPC) materials were prepared using partially calcined dolomite and ammonium dihydrogen phosphate. The MPC were prepared with varying amounts of cement kiln dust (CKD) in the range of 0–30 % weight. The influence of CKD addition on the characteristics of the cement compositions was explained in terms of struvite phase formation as well as the remained CaCO3. The obtained results demonstrated the benefit of the CKD as an additive in MPC that uses partially calcined dolomite as source of MgO leading to promoting the struvite formation. A mechanical tensile strength of 2.95 MPa was obtained and compared to results reported in the literature. Moreover, the magnesia was not dead burned as previous reported in many studies. The obtained results showed that these cements, advantageously, can be used at lower cost for the replacement of the actual commercial cement.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Layered Double Hydroxides Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Magnesium ammonium phosphate formation, recovery and its application as valuable resources: a review10.1002/jctb.3936 ↗
2. Upcycling wood waste into fibre-reinforced magnesium phosphate cement particleboards10.1016/j.conbuildmat.2017.10.107 ↗
3. Preparation of magnesium phosphate cement by recycling the product o thermal transformation of asbestos containing wastes10.1016/j.cemconres.2013.11.016 ↗
4. Possible applications for municipal solid waste fly ash10.1016/S0304-3894(02)00201-7 ↗
5. Effects of municipal solid waste incineration fly ash on solidification/ stabilization of Cd and Pb by magnesium potassium phosphate cement10.1016/j.jece.2015.11.025 ↗
6. Influence of the addition of grinding dust to a magnesium phosphate cement matrix10.1016/j.conbuildmat.2009.03.013 ↗
7. Properties and applications of magnesia-phosphate cement mortar for rapid repair of concrete10.1016/S0008-8846(00)00419-1 ↗
8. Factors influencing properties of phosphate cement-based binder for rapid repair of concrete10.1016/S0008-8846(98)00230-0 ↗
9. Mechanism of setting reaction in magnesia-phosphate cements10.1016/S0008-8846(99)00254-9 ↗
10. Hydration/ dehydration characteristics of struvite and dittmarite pertaining of magnesium ammonium phosphate cement systems10.1007/BF01130204 ↗
11. In situ synchrotron powder diffraction study of the setting reaction kinetics of magnesium-potassium phosphate cements10.1016/j.cemconres.2015.10.007 ↗
12. Deicer-scaling resistance of phosphate cement- based binder for rapid repair of concrete
13. Review of the splitting-test standers from a fracture mechanics point of view10.1016/S0008-8846(00)00425-7 ↗
14. Size effect and bourn dray condition in the Brazilian tests: experimental verification10.1007/BF02482715 ↗
15. Tensile strength behavior of recycled aggregate concrete10.1016/j.conbuildmat.2015.03.034 ↗
16. The effect of retarders on the microstructure and mechanical properties of magnesia-phosphate cement mortar10.1016/S0008-8846(00)00501-9 ↗
17. Accelerated reactivity assessment of light burnt magnesium oxide10.1111/j.1551-2916.2008.02330.x ↗
18. Mechanical property and water stability of the novel CSA-MKPC blended system10.1016/j.conbuildmat.2017.03.103 ↗
19. Magnesium phosphate cements formulated with a low-grade MgO by-product: physic-mechanical and durability aspects10.1016/j.conbuildmat.2015.05.071 ↗
20. Effect of waterglass on water stability of potassium magnesium phosphate cement paste10.1016/j.cemconcomp.2014.03.012 ↗
21. The crystal structure of struvite, MgNH4PO4.6H2O10.1107/S0567740870004284 ↗
22. Influence of magnesia-to-phosphate molar ration on microstructures, mechanical properties and thermal conductivity of magnesium potassium phosphate cement paste with large water-to-solid ratio10.1016/j.cemconres.2014.10.019 ↗
23. Raman diagnostic of the reactivity between ZnSO4 and CaCO3 particles in humid air relevant to heterogeneous zinc chemistry in atmosphere10.1016/j.atmosenv.2013.11.073 ↗
24. Electrochemically generated CaCO3 deposits on iron studies with ETIR and Raman spectroscopy10.1016/S0013-4686(97)10167-0 ↗
25. Raman spectroscopy of newberyite, hannayite and struvite10.1016/j.saa.2004.12.024 ↗
26. Infrared and Raman spectra of magnesium ammonium phosphate hexahydrate (struvite) and its isomorphous analogues.VII: spectra of protiated and partially deuterated hexagonal magnesium caesium phosphate hexahydrate10.1016/j.molstruc.2008.12.009 ↗
27. A solid state MR and in-situ infrared spectroscopy study on the setting reaction of magnesium sodium phosphate cement10.1016/j.jnoncrysol.2018.06.006 ↗
28. Raman and NMR study of bioactive Na2O-MgO-CaO-P2O5-SiO2 glasses10.1016/j.jnoncrysol.2008.07.033 ↗
29. Influence of cement kiln dust substitution on the mechanical properties of concrete10.1016/S0008-8846(99)00262-8 ↗
30. Astudy of the bonding performance of magnesium phosphate cement on mortor and concrete10.1016/j.conbuildmat.2017.03.090 ↗