journal article·2021-12Open access

Experimental study using ASTM and BS standards and model evaluations to predict the compressive strength of the cement grouted sands modified with polymer

Wael Emad, Ahmed Salih, Rawaz Kurda

Abstract

The present article discusses the impact of the different grain sizes of sand on the ultimate stress of hand-mixed cement grouted sand modified with polycarboxylate ether-based polymer using two different test standards (ASTM and BS). The fresh and hardened properties of cement grouted sands modified with polymer up to 0.16 % of the weight of cement were tested and quantified. Five types of sand with different grain sizes were used in this study. Adding polymer decreased the water/cement ratio (w/c) by 21.9–54.1%, and it kept the flow time of the cement-based grout in the range of 18–23 s. Adding polymer creates an amorphous gel that fills the porous between the cement particles, which causes a reduction in the voids, porosity and enhanced the dry density of the cement; subsequently, the compression strength of the cement-grouted sands increased significantly. Linear and nonlinear approaches were employed to estimate the compressive strength of cement grouted sand with a different grain size of sand, w/c, amount of polymer, and curing age. The compressive strength of the cement grouted sands following the BS standard was 71 % larger than the compression strength of the same mix using the ASTM standard.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Mechanical behavior of chemically grouted sand10.1061/(ASCE)0733-9410(1986)112:9(869) ↗
2. Babcock · 2013 · 20
3. Bungey · 1996
4. Rheological properties of cement-based grouts determined by different techniques
5. Houlsby · 1990 · Vol. 67
6. Viscosity, yield stress and compressive strength of cement-based grout modified with polymers
7. TGA, rheological properties with maximum shear stress and compressive strength of cement-based grout modified with polycarboxylate polymers10.1016/j.conbuildmat.2019.117534 ↗
8. Shear stress limit, rheological properties and compressive strength of cement-based grout modified with polymers10.1007/s41024-019-0069-1 ↗
9. Engineering properties of high volume slag cement grout in tropical climate
10. Effect of bentonite on the rheological behavior of cement grout in presence of superplasticizer
11. Statistical variations and new correlation models to predict the mechanical behaviour of the cement mortar modified with silica fume
12. Systemic multi-scale approaches to predict the flowability at various temperature and mechanical properties of cement paste modified with nano-calcium carbonate10.1016/j.conbuildmat.2020.120777 ↗
13. Bowen · 1981
14. Rheological properties of low pH cement-palygorskite injection grout
15. Effect of different sand grading on strength properties of cement grout10.1016/j.conbuildmat.2012.08.030 ↗
16. Effect of particle size distribution of sand on mechanical properties of cement mortar modified with microsilica
17. Influence of sand grading on the characteristics of mortars and soil–cement block masonry10.1016/j.conbuildmat.2007.06.014 ↗
18. Influence of aggregates grading and water/cement ratio in workability and hardened properties of mortars10.1016/j.conbuildmat.2010.11.011 ↗
19. Influence of fine aggregate characteristics on the rheological properties of mortars10.1016/j.cemconcomp.2007.08.008 ↗
20. Soft computing techniques: systematic multiscale models to predict the compressive strength of HVFA concrete based on mix proportions and curing times
21. Artificial Neural Network and NLR techniques to predict the rheological properties and compression strength of cement past modified with nanoclay
22. Microstructure characterizations, thermal properties, yield stress, plastic viscosity and compression strength of cement paste modified with nanosilica10.1016/j.jmrt.2020.07.083 ↗
23. Characterization and modeling the flow behavior and compression strength of the cement paste modified with silica nano-size at different temperature conditions10.1016/j.conbuildmat.2020.119590 ↗
24. ANN, M5P-tree model, and nonlinear regression approaches to predict the compression strength of cement-based mortar modified by quicklime at various water/cement ratios and curing times10.1007/s12517-020-06199-5 ↗
25. ANN, M5P-tree and nonlinear regression approaches with statistical evaluations to predict the compressive strength of cement-based mortar modified with fly ash10.1016/j.jmrt.2020.08.083 ↗
26. The effectiveness of ensemble-neural network techniques to predict peak uplift resistance of buried pipes in reinforced sand10.3390/app11030908 ↗
27. Artificial neural network (ANN), M5P-tree, and regression analyses to predict the early age compression strength of concrete modified with DBC-21 and VK-98 polymers
28. Systematic multiscale models to predict the compressive strength of self-compacting concretes modified with nanosilica at different curing ages
29. Prediction of peak particle velocity caused by blasting through the combinations of boosted-CHAID and SVM models with various kernels10.3390/app11083705 ↗
30. Comparison of artificial neural network (ANN) and linear regression modeling with residual errors to predict the unconfined compressive strength and compression index for Erbil City soils, Kurdistan-Iraq10.1007/s12517-021-06712-4 ↗
31. Modelling of impact of water quality on recharging rate of storm water filter system using various kernel function based regression10.1007/s40808-017-0410-0 ↗
32. Polycarboxylate superplasticiser admixtures: effect on hydration, microstructure and rheological behaviour in cement pastes10.1680/adcr.2005.17.2.77 ↗
33. Influence of nanosilica and a polycarboxylate ether superplasticizer on the performance of lime mortars10.1016/j.cemconres.2012.10.007 ↗
34. Formulation and characterization of a new ecological cementitious material at base of different percentage of limestone fillers: study of physical-chemical and mechanical properties
35. The effect of polymeric admixtures of water reduce of superplasticizer and setting accelerator on physical properties and mechanical performance of mortars and concretes
36. Vipulanandan constitutive models to predict the rheological properties and stress–strain behavior of cement grouts modified with metakaolin10.1520/JTE20180271 ↗
37. Hydraulic conductivity, Grain Size Distribution (GSD) and cement injectability limits predicted of sandy soils using vipulanandan models
38. New Vipulanandan pq model for particle size distribution and groutability limits for sandy soils10.1520/JTE20180606 ↗
39. Vipulanandan constitutive models to predict the rheological properties and stress–strain behavior of cement grouts modified with metakaolin10.1520/JTE20180271 ↗
40. Smart cement compressive piezoresistive, stress-strain, and strength behavior with nanosilica modification10.1520/JTE20170105 ↗
41. Smart cement modified with iron oxide nanoparticles to enhance the piezoresistive behavior and compressive strength for oil well applications10.1088/0964-1726/24/12/125020 ↗
42. Vipulanandan models to predict the electrical resistivity, rheological properties and compressive stress-strain behavior of oil well cement modified with silica nanoparticles10.1016/j.ejpe.2018.07.001 ↗
43. Testing and modeling the short-term behavior of lime and fly ash treated sulfate contaminated CL soil10.1007/s10706-015-9890-8 ↗
44. Vipulanandan failure models to predict the tensile strength, compressive modulus, fracture toughness and ultimate shear strength of calcium rocks
45. Statistical variations and new correlation models to predict the mechanical behavior and ultimate shear strength of gypsum rock10.1515/eng-2018-0026 ↗
46. Strength properties of self-compacting mortar mixed with GGBFS10.1680/coma.10.00016 ↗
47. Neville · 2009 · 503
48. Size and shape effect of specimen on the compressive strength of HPLWFC reinforced with glass fibres10.1016/j.jksues.2015.09.003 ↗
49. Effect of specimen size and shape on the compressive strength of high strength concrete
50. Elwell · 1995