Steel scale waste as component in mortars production: An experimental study
Source abstract
Abstract
The present research reports on the results of some experiments dealing with the recycling of steel scale waste in the production of mortars. Materials were prepared mixing a commercial CEMII/B-LL cement, a steel scale waste, a commercial natural aggregate, superplasticizer and water. Natural aggregate was replaced with different proportions (5, 10, 20, 30 and 40 wt%) of steel scale waste. Water absorption, apparent density, compression strength and thermal conductivity were measured after 28 d of curing. After curing, all hydrated materials displayed: good compressive strength and low water absorption; increased apparent density with steel scale addition; improvement of thermal conductivity in materials containing up to 10 wt% steel scale addition.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Recycling of scale and steel chips waste as a partial replacement of sand in concrete10.1016/j.conbuildmat.2011.08.047 ↗
2. Thermal conductivity bounds for isotropic, porous materials10.1016/j.ijheatmasstransfer.2004.12.032 ↗
3. In-situ alumina-aluminate platelet composites10.1111/j.1151-2916.1992.tb05623.x ↗
4. Comparison of mechanical properties of mortar containing industrial byproduct10.1016/j.apcbee.2014.01.056 ↗
5. Collepardi · 1991
6. Crack propagation and strain localization in metallic particulate-reinforced cementitious mortars10.1016/j.matdes.2015.04.038 ↗
7. The effects of bond strengths between lightweight and ordinary aggregate-mortar, aggregate-cement paste on the mechanical properties of concrete10.1016/S0921-5093(03)00595-1 ↗
8. Jenkins · 1996
9. Thermal conductivity of fibre reinforced porous calcium silicate hydrate-based composites10.1177/1097196303027001005 ↗
10. Kumar · 2011
11. The effect of porosity on thermal properties: towards a threshold of particle contact in sintered stainless steel10.1088/0953-8984/17/7/016 ↗
12. Utilization of recycle cathode ray tubes glass in cement mortar for X-ray radiation-shielding applications10.1016/j.jhazmat.2011.11.019 ↗
13. Fly and bottom ashes from biomass combustion as cement replacing components in mortars production: rheological behaviour of the pastes and materials compression strength10.1016/j.chemosphere.2011.06.070 ↗
14. Recycling glass cullet from waste CRTs for the production of high strength mortars10.1155/2013/102519 ↗
15. Determination of specimen-size independent fracture toughness of plain concrete10.1680/macr.1986.38.135.67 ↗
16. Neville · 1990
17. Influence of finely ground limestone on cement hydration10.1016/S0958-9465(98)00020-1 ↗
18. On the near-tip toughening by crack-face bridging in particulate and platelet-reinforced ceramics10.1016/1359-6454(95)00250-2 ↗
19. Use of low CaO unprocessed steel slag in concrete as fine aggregate10.1016/j.conbuildmat.2008.06.003 ↗
20. Physical properties of iron-oxide scales on Si-containing steels at high temperature10.2320/matertrans.M2009097 ↗
21. The effect of pigments on the quality of concrete blocks
22. Effect of porosity on the thermal conductivity of copper processed by powder metallurgy10.1016/j.jpcs.2011.11.033 ↗
23. C. Valore Rudolph, Methods of preparing iron oxide mortars or cements with admixtures and the resulting products, US 4188231A (1977).
24. Fracture behaviour of composites based on Al2O3-TiC10.1007/BF00552097 ↗
25. A new approach to modelling the effective thermal conductivity of heterogeneous materials10.1016/j.ijheatmasstransfer.2006.02.007 ↗